What's new
By:
Filters

WooshBuild Wooshbuild Infinity Support Thread

Status
Not open for further replies.
dargan said:
Hi I have put infinity on an old amiko alien 2 with a 500gb external hdd drive, I eventally got the hdd to initialize and I have tried xtream editor and xc lite for the iptv but it wont play live iptv, it will play vod but it freezes solid if I try to exit it..... the box is very very slow and the wheel appears and it needs to be rebooted to get going again, is the box just broken or am I doing something wrong...... I flashed it with open atv 6.2 before I added infinity but that did not seem to work properly either as language was all mixed up in the settings to get started... Thanks guys
Click to expand...
How did u get it to initialize coz I can't get mine to work would be great for some info
 
saq129 said:
hi, flashed over to woosh from ipab, i used to put my lines in usr/keys in the ccam.cfg folder whether it was N or C both cleared no issues.... but cant seem to get them to clear on woosh, are the lines meant to go in another location?.. i know i can use the ccam importer and have used it to get them lines working but wondering why they wouldnt clear when i did it manually.

cheers
Click to expand...

Hi could somone just just confirm this with me

Thanks
 
Getrom29 said:
Has there been any major updates making it worth reflashing?
Click to expand...
Setup may have changed slightly since you flashed your box. You can now add freeview and saorview during the infinity install. Cant think of anything that as changed as such
 
Trying to download this onto my box but am getting the following error message:

Collected errors:
* open_outer: Failed to open package '/var/cache/opkg/b00ee9eca1a4a323632ef0439851ee2c_setup.ipk': Unrecognized archive format
* open_outer: Failed to open package '/var/cache/opkg/b00ee9eca1a4a323632ef0439851ee2c_setup.ipk': Unrecognized archive format
* pkg_extract_control_file_to_stream: Failed to extract control.tar.* from package '/var/cache/opkg/b00ee9eca1a4a323632ef0439851ee2c_setup.ipk'.
* pkg_init_from_file: Failed to extract control file from /var/cache/opkg/b00ee9eca1a4a323632ef0439851ee2c_setup.ipk.

I had wooshbuild on previously and reflashed my box (zgemma h2s) to openatv 6.2. Any help would be appreciated
 
alth79 said:
Trying to download this onto my box but am getting the following error message:

Collected errors:
* open_outer: Failed to open package '/var/cache/opkg/b00ee9eca1a4a323632ef0439851ee2c_setup.ipk': Unrecognized archive format
* open_outer: Failed to open package '/var/cache/opkg/b00ee9eca1a4a323632ef0439851ee2c_setup.ipk': Unrecognized archive format
* pkg_extract_control_file_to_stream: Failed to extract control.tar.* from package '/var/cache/opkg/b00ee9eca1a4a323632ef0439851ee2c_setup.ipk'.
* pkg_init_from_file: Failed to extract control file from /var/cache/opkg/b00ee9eca1a4a323632ef0439851ee2c_setup.ipk.

I had wooshbuild on previously and reflashed my box (zgemma h2s) to openatv 6.2. Any help would be appreciated
Click to expand...

Have turned the VPN off and looks like it is now working!
 
Hi guys. My bbc, itv and channel 4 have disappeared from my epg. If i try the shortcuts like 101 etc, the channels don’t come up. Any idea what’s happened and how I can rectify this? My setup had been 100% since I was shown how to change the HDD to my external hard drive. Thanks in advance for any help
 
Issue with Fast Forward and rewind

I have upgraded from H2H to h9.
Openatv 6.2 and wooshbuild. I am.using same USB pen drive yet my fast forward and rewind of recorded programmes does not work.

It looks like it works, the picture fast forwards but as soon as you per as play you end up back at the same point as she you pressed the FF button.
Highly annoying

Anyone any ideas, changed loads of setting bit still no change.
 
You will find this will be the H9 causing the problem, it seems to have fickle little bits. I have something similar on the Vu+ Solo4K. Try rewinding at 2x to start with and see if that makes a difference.

I don't have a solution for you as I don't for my Solo4K
 
Ah ok.
Even the 1/3 4/6 and 7/9 buttons do move the timeline but only once, if you press it again it stays at that point.

The timeline (plus 4 mins - 55 mins remaining) works fine unless fast forward or rewind.
The h2h timeline moved as you fast forwarded.

Is the fast forward part of woosh software or openatv or the h9 hardware?
 
Hello, I current use ipabtv image on my mutant 51hd but this image is no longer supported. I am thinking of flashing to use this one but want to ask if it is possible to use cable and freeview terrestrial tuners at same time. I have two T2/C tuners but have never been able to use both cable and freeview as only one of the two will clear channels.
 
I've noticed since installing the infinity build that when I watch an iptv program, the clock on my zgemma box freezes. Anyway to fix this? Didn't happened on the other wooshbuild 7.
 
deejaygav said:
Hello, I current use ipabtv image on my mutant 51hd but this image is no longer supported. I am thinking of flashing to use this one but want to ask if it is possible to use cable and freeview terrestrial tuners at same time. I have two T2/C tuners but have never been able to use both cable and freeview as only one of the two will clear channels.
Click to expand...
This is can't answer as I can't get cable, only freeview and something I have wondered myself. I bet the Friday cheering @dsayers2014 will know the answer though.
 
magic8ball said:
Ah ok.
Even the 1/3 4/6 and 7/9 buttons do move the timeline but only once, if you press it again it stays at that point.

The timeline (plus 4 mins - 55 mins remaining) works fine unless fast forward or rewind.
The h2h timeline moved as you fast forwarded.

Is the fast forward part of woosh software or openatv or the h9 hardware?
Click to expand...
It is all part of openATV. You can flash your box, put ABM on and scan and the seek stuff will still work with a very basic setup. I don't touch any of the workings of openATV which is why I think it will be the H9 range causing the issue.
 
swandog said:
I've noticed since installing the infinity build that when I watch an iptv program, the clock on my zgemma box freezes. Anyway to fix this? Didn't happened on the other wooshbuild 7.
Click to expand...
Guessing I would say that WooshBuild 7 was openATV 6.1 where as now you should be using 6.2 and wonder if this is causing the issue. Install the permaclock plugin and see if that helps.
 
deejaygav said:
Hello, I current use ipabtv image on my mutant 51hd but this image is no longer supported. I am thinking of flashing to use this one but want to ask if it is possible to use cable and freeview terrestrial tuners at same time. I have two T2/C tuners but have never been able to use both cable and freeview as only one of the two will clear channels.
Click to expand...

If you have 2 tuners then yes you should be able to.
 
I have used wbconfig to install my c line but don't have any of the premium channels. Do I need to activate the cake and if so how do I do it? I can't find the menu to do this on infinity.
 
Hi. Ive just upgraded my receiver to a ZGEMMA H9S and installed wooshbuild infinity.
I was still using a cccam line on my old box for watching German Sky TV which still works even in HD.
Now I've installed infinity on my new box there doesn't seem to be an option anywhere to activate my CCCAM. I've searched through the plugins but with no joy.
Anybody have any ideas on how to sort this?

Cheers
 
Status
Not open for further replies.
Back
Top