What's new
By:
Filters

WooshBuild Wooshbuild Infinity Support Thread

Status
Not open for further replies.
Trying2Hard said:
I have flashed OpenATV 6.2 and installed Infinity (following the instructions on Page 1 of this thread to the letter), without any issues. Many thanks to Woosh and all those involved building this great piece of work. My setup is a VuPlus Duo2, 1TB internal HDD, 8GB USB Flash Drive and a motorised dish. Using SkyQ skin at the moment.
I have just installed Ciepf E2 Settings 68e-30w-VOD from the Plugins. My 28.2E FTA channels have disappeared. I guess I will have to run an ABM scan, but before I do that I just want to check - how do I get the ABM generated 28.2E FTA bouquets to appear at the top of the Favourites list, then all the Ciepf bouquets underneath those?
Second question, my HDD spins up when I change channel. I have mounted the internal HDD as media/hdd and mounted the USB Flash Drive as media/usb. I have set up a 256mb Swap File on the USB Flash Drive and set the EPG to be stored on the Flash Drive. Also I have disabled Timeshift.

Ok, fixed the bouquets by doing an ABM scan so they all look fine now.

Any ideas why my HDD spins up when changing channels?
Click to expand...

Uninstalled the SkyQ Large Picons from the plugins menu and this fixed the HDD spinning up when changing channel problem. But when downloading those picons they Default install onto the HDD (there is no option to select where you want them to be installed). Can this be fixed?
 
bils779 said:
When I click on the APP Chabs Skins (change between chabs preferances) the box crashes ... how can I delete it and reinstall ????
cheers
Click to expand...
When I click the Chabs Skins plugin in Wooshbuild Infinity on my Zgemma H.2S boxes it always crashes to blue screen and then the box re-boots. I have re-installed but it still crashes. Now considering the MetrixHD skin until skyNEW works like before.
 
Good afternoon

I have zgemma H5 running VM 6.3 + infinity

STV HD doesnt show anything. does anyone know of a fix for this?

Thanks in advance
 
panorama93 said:
When I click the Chabs Skins plugin in Wooshbuild Infinity on my Zgemma H.2S boxes it always crashes to blue screen and then the box re-boots. I have re-installed but it still crashes. Now considering the MetrixHD skin until skyNEW works like before.
Click to expand...

Don't use any HD skins on an old box, there's not enough memory to run these, this is why you are getting the crashing
 
Hi I have a Zgemma box I have WooshBuild infinity install. And been playing around with settings and addons. Would like to reset or reinstall WooshBuild. Is it as simple as running the thermal Opkg Install Command again or do I need to reinstall OpenATV

Thanks
 
PH086 said:
Hi I have a Zgemma box I have WooshBuild infinity install. And been playing around with settings and addons. Would like to reset or reinstall WooshBuild. Is it as simple as running the thermal Opkg Install Command again or do I need to reinstall OpenATV

Thanks
Click to expand...
Reinstall open atv mate just press blue software manger flashonline/local then green flashonline and if you press blue it will give option for 6.3 then once done re run infinity command
 
Hi,
I am running Wooshbuild Infinity on a Zgemma H2S. Everything is working fine apart from I haven’t been able to work out how to record a programme and watch it. I was running Ipab before and simply had to click on the recordings tab on the EPG to access the recording. I have recorded a programme in the last couple of days but can’t work out how to access it. It’s probably staring me in the face but being partially sighted doesn’t help. I would be grateful if someone could advise me.
Thanks
Paul
 
Plonk said:
Hi,
I am running Wooshbuild Infinity on a Zgemma H2S. Everything is working fine apart from I haven’t been able to work out how to record a programme and watch it. I was running Ipab before and simply had to click on the recordings tab on the EPG to access the recording. I have recorded a programme in the last couple of days but can’t work out how to access it. It’s probably staring me in the face but being partially sighted doesn’t help. I would be grateful if someone could advise me.
Thanks
Paul
Click to expand...
File list on remote for recordings you've recorded
 
Help! :)

Got rid of an old FreeSat Box and purchased a new zgemma h9.2s (a few years ago I had a h2s and older wooshbuild, got rid of it when all the 'sly' black screen and blocking issues came up!)

Anyway, everything is plugged in ok, went through all the tutorials of getting Open ATV and Wooshbuild onto the box, all ok apart from the satellite scanning part fails. Once Wooshbuild has finished installing none of the channels come through the satellite, I have been through all sorts of options in the menus and the only time I can get it to find any satellite signal or channels is to do a 'blind scan' which then shows up something like 600 channels (lots of duplicates obviously) and the EPG is all over the place.

Thinking it might be something to do with Wooshbuild I even reflashed the box with OpenVix (the horror!) and had exactly the same result on this.

So at the moment I've got a pretty useless h9.2s, just can't figure out why the satellite isn't being found automatically, makes no sense to me at all... (plugging the old FreeSat box in seems to work fine)

Any help would be fantastic!

Thanks
 
Did you download auto bouquets maker from menu plugins green to download plugins extensions then look for auto bouquets maker @makido may be able to say better on this as always helping on infinity support page
 
bazcfc1 said:
Did you download auto bouquets maker from menu plugins green to download plugins extensions then look for auto bouquets maker @makido may be able to say better on this as always helping on infinity support page
Click to expand...

Thanks, will have a look when the Mrs has stopped watching stuff (from Plex, not satellite!) - might help with the EPG, but doesn't explain why the satellite wasn't automatically finding anything :/

:)
 
Status
Not open for further replies.
Back
Top