Zgemma H9.2S & H9.2H

I had a problem with the display falling off the right edge of the screen.

so I googled it and it appeard to be from another forum I am not allowed to post here.

If anyone has the same problem it looks like this.



I did a test mount of an old 32Gb SD card I had, then Move to Sd, then Restart on Flash and Reboot. Works great!

you need to edit your post.
Posting other forum links is strictly against the rules, click edit and remove the link

been using the zgemma h1 for a few years now, treated myself to a new box
got this one Zgemma H9.2H 4K UHD H.265 HEVC Combo Tuner 1x DVB-S2X + 1x DVB-C/T2 Linux Enigma2 Multi-stream QT Stalker WiFi Digital Receiver
waiting on it arriving today, driver running late, should have been here this morning, will be using it for sat and cable, getting impatient awaiting its arrival

Had mine for 4 days, finally getting it set up how I like it.

Hi
I have upgraded my zgemma star 2s box that ran ipabtv to a zgemma h9s that has whooshbuild and xtream editor on it. My problem is I can't get my IPTV line onto the box that I had on the older box and I still have 7 months of my subscription left.
Any help would be great
Thanks

chris-manch said:

Had mine for 4 days, finally getting it set up how I like it. View attachment 37395 View attachment 37396

Click to expand...

Hi
I was wondering did you have any problems putting your IPTV line on your box. I can't seem to get mine onto the box
Thanks

I havent tried IPTV sorry

I just purchased the zgemma h92s and sending it back sorry but I don’t rate it at all nothing but issues with it so far

Sam14 said:

I just purchased the zgemma h92s and sending it back sorry but I don’t rate it at all nothing but issues with it so far

Click to expand...

Mate
Can you elaborate on this it will help people out ;)

i recently flashed a H9.2h
Utterly weird
when you download and unzip the openatv flash files, there's the usual folder, called h9 in this case, but also 2 other files, can't remember what they were called but one was boot..somthing and other also had boot in it's name, these were not in the main h9 folder.
put the h9 folder on usb and tried it, nothing, tried half a dozen, still nothing, formated with @Willo3092 usb prep tool from the downloads section, still nothing
I had to put the two seperate files and the H9 folder on the usb to flash
it flashed openatv6.2 (from vix)
as soon as it flashed and frerange installed, BBC1 was playing in the back ground and a full epg was showing, this is before a scan, ABM setup or anything else
couldn't get oscam to work yesterday so today flashed openatv6.2 again, the chap decided he wanted infinity, so run the script etc
once finished, again BBC1 was playing, fully populated epg, all i had to do was upload the oscam.server file and restart softcam.
How is this possible
it had been flashed twice and managed to save epg data and all scanned channels etc
no backups were used, none were mentioned by infinity..it asked during freerange installation if i wanted to back but i chose 'no'
what's going on here?

bootargs-mmc.bin which contains:
4
ßIethaddr=00:00:00:00:00:01 baudrate=115200 ipaddr=192.168.1.10 netmask=255.255.255.0 gatewayip=192.168.1.1 serverip=192.168.1.1 bootargs_512M=mem=512M mmz=ddr,0,0,48M vmalloc=500M bootargs_1G=mem=1G mmz=ddr,0,0,48M vmalloc=500M bootargs_2G=mem=2G mmz=ddr,0,0,48M vmalloc=500M bootargs_768M=mem=768M mmz=ddr,0,0,48M vmalloc=500M bootargs_1536M=mem=1536M mmz=ddr,0,0,48M vmalloc=500M bootargs_3840M=mem=3840M mmz=ddr,0,0,48M vmalloc=500M bootargs=console=ttyAMA0,115200 root=/dev/mmcblk0p1 rw ubi.mtd=8,2048 rootfstype=ext4 rootwait mtdparts=hinand:1M(boot),1M(bootargs),1M(baseparam),1M(pqparam),1M(logo),1M(deviceinfo),8M(trustedcore),16M(kernel),226M(rootfs),-(others) bootdelay=0 stdin=serial stdout=serial stderr=serial modelname=h9 led_gpio=5_4 led_gpio_level=0 bootcmd=nand read 0x1000000 0x0e00000 0x800000;bootm 0x1000000

and bootargs-nand.bin which contains:
s•~Ãethaddr=00:00:00:00:00:01 baudrate=115200 ipaddr=192.168.1.10 netmask=255.255.255.0 gatewayip=192.168.1.1 serverip=192.168.1.1 bootargs_512M=mem=512M mmz=ddr,0,0,48M vmalloc=500M bootargs_1G=mem=1G mmz=ddr,0,0,48M vmalloc=500M bootargs_2G=mem=2G mmz=ddr,0,0,48M vmalloc=500M bootargs_768M=mem=768M mmz=ddr,0,0,48M vmalloc=500M bootargs_1536M=mem=1536M mmz=ddr,0,0,48M vmalloc=500M bootargs_3840M=mem=3840M mmz=ddr,0,0,48M vmalloc=500M bootargs=console=ttyAMA0,115200 root=ubi0:rootfs rw ubi.mtd=8,2048 rootfstype=ubifs rootwait mtdparts=hinand:1M(boot),1M(bootargs),1M(baseparam),1M(pqparam),1M(logo),1M(deviceinfo),8M(trustedcore),16M(kernel),226M(rootfs),-(others) bootdelay=0 stdin=serial stdout=serial stderr=serial modelname=h9 led_gpio=5_4 led_gpio_level=0 bootcmd=nand read 0x1000000 0x0e00000 0x800000;bootm 0x1000000

Well have an iptv sub it runs fine on firestick but when I put the same sub on the h92s it’s rubbish tried everything it pixelates even with service app the delay in response to the remote is shocking tried various images also

Worst box I’ve had to be honest maybe it’s just my experience with one but for me it’s a No No

pabloescaban said:

when you download and unzip the openatv flash files, there's the usual folder, called h9 in this case, but also 2 other files, can't remember what they were called but one was boot..somthing and other also had boot in it's name, these were not in the main h9 folder.

Click to expand...

That sounds similar to the Octagon SF8008 which also has a usb update bin file outside the normal folder.

I noticed this also with the files anyone know why?

Willo3092 said:

That sounds similar to the Octagon SF8008 which also has a usb update bin file outside the normal folder.

View attachment 37400

Click to expand...

It's the two files mentioned above by @chris-manch bootargs files
i don't know why the reflash didn't remove the epg or channel list, twice

I've just seen that the ViX Team are going to be adding support for expanding the nand flash to 8gb using a microsd card.
I wonder if the 250mb onboard is just too small.

pabloescaban said:

It's the two files mentioned above by @chris-manch bootargs files
i don't know why the reflash didn't remove the epg or channel list, twice

Click to expand...

It hasn't got a microsd inserted has it? Just wondered if stuff was being stored on there.

I used flash expander for the h92s

i did it remotely via teamviewer so can't be sure but highly unlikely