spamwithabea
Newbie
Hi.
I'm running mpockets 4.2 image, and have OSMC (Kodi) running on an RPi B.
I've enabled the Enigma PVR addon in OSMC and have the two talking to each other nicely. I'm able to watch live TV streams, and see the EPG, however both devices constantly have high CPU load which cannot be healthy.
OSMC is always sitting at least 95% and the 2S's engima2 process sits at 80% when locally nothing is playing and it's in standby. Nothing is playing on the Pi at this point either, it's just very slowly and permanently importing the guide.
The two are connected via powerline adapters, which iperf shows to have about 20mb capacity so I don't think network is the issue:
Am I expecting too much of the zgemma box?
I'm running mpockets 4.2 image, and have OSMC (Kodi) running on an RPi B.
I've enabled the Enigma PVR addon in OSMC and have the two talking to each other nicely. I'm able to watch live TV streams, and see the EPG, however both devices constantly have high CPU load which cannot be healthy.
OSMC is always sitting at least 95% and the 2S's engima2 process sits at 80% when locally nothing is playing and it's in standby. Nothing is playing on the Pi at this point either, it's just very slowly and permanently importing the guide.
The two are connected via powerline adapters, which iperf shows to have about 20mb capacity so I don't think network is the issue:
Code:
osmc@osmc-bedroom:~$ iperf -c 10.0.7.15
------------------------------------------------------------
Client connecting to 10.0.7.15, TCP port 5001
TCP window size: 43.8 KByte (default)
------------------------------------------------------------
[ 3] local 10.0.7.111 port 49372 connected with 10.0.7.15 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 29.1 MBytes 24.4 Mbits/sec