Mikey B OpenAtv 6.1 Support Thread

[mikeyb123]

hi great work all working toppa only thing how do u uninstall xtreme as i have one already and cant install until the one installed is removed cheers great work again.
sound all with nar gone woohooo and sound back

If i can remember ftp to usr/lib/enigma2/components and delete xtreamtv folder then reboot box.

I know its in enigma2 u may have to look through folders for it as i cant remember exact location off top of my
head but you will see it :)

 

[Dykey]

Hi Mikey

Is there a way to get the box to display channel number rather than time on your build ?

 

[mikeyb123]

Hi Mikey

Is there a way to get the box to display channel number rather than time on your build ?

Hi i havent even tried to set this myself but will when i get home. But the setting to change it should be menu/setup/usage&gui/display/led display

 

[mikeyb123]

Im

Hi Mikey , thanks for the upload , i have put your openATV 6.1 backup on my Zgemma H1 but have noticed that the spinning icon in the top left hand corner is coming on every 10-15 secs when i am watching TV , i am assuming that the box is working hard when this icon is appearing so i have disabled timeshift to try and stop it but to no avail.Have you any ideas please?

I really aint sure bud, i havent came across this problem before, but it sound to me like somthing is going on, make sure u havent recorded or stated recording by mistake,

 

[cronus]

Hi Mikey , thanks for the upload , i have put your openATV 6.1 backup on my Zgemma H1 but have noticed that the spinning icon in the top left hand corner is coming on every 10-15 secs when i am watching TV , i am assuming that the box is working hard when this icon is appearing so i have disabled timeshift to try and stop it but to no avail.Have you any ideas please?

Doing the same on mine as well

 

[mikeyb123]

Doing the same on mine as well

Turn off timeshift in settings, remove usb / hdd, reboot box replug in usb /hdd

 

[walf1888]

Anyone managed to get iptv player going?

 

[tanner74]

Turn off timeshift in settings, remove usb / hdd, reboot box replug in usb /hdd

same with mine mate. Not sure how to turn timeshift off. There doesn't seem to be a option for this

 

[ej2_sir]

Doing the same on mine as well

Mine too.

 

[mikeyb123]

same with mine mate. Not sure how to turn timeshift off. There doesn't seem to be a option for this

Menu / setup/recordings & timeshift/ Timeshift settings
Timeshift location /media/hdd/timeshift/

Timeshift checking for free space = no
Timeshift checking for older files [in minutes] = disabled

Enable auto record = no
Automatically start timeshift after = disabled

Recording settings
Prefered tuner for recording = disabled

Try that then remove usb stick re-add usb while reebooting box

 

[mikeyb123]

Also menu/setup/EPG/settings and change EPG location to /media/hdd

 

[walf1888]

Has anyone been able to watch anything on iptv player? It lets me in but wont start a film?

 

[chrissaces]

Hi Mikey, just downloaded your build, flashed my zgemma star H2 with no problems, scanned and found vermin bouquets, ftp'd my newcamd.list file over to my box in usr/keys, changed cam to mgcamd_1.38r1 and started it but not getting anything? Restarted my box to check if it needed it but still no luck... I've noticed that the folder has files with .example in there though, not sure if I have to rename any of them?

 

[chrissaces]

Hi Mikey, just downloaded your build, flashed my zgemma star H2 with no problems, scanned and found vermin bouquets, ftp'd my newcamd.list file over to my box in usr/keys, changed cam to mgcamd_1.38r1 and started it but not getting anything? Restarted my box to check if it needed it but still no luck... I've noticed that the folder has files with .example in there though, not sure if I have to rename any of them?

Ah damn, just noticed earlier in the thread that you advised to upload the mg_cfg file too! I'll try that now

 

[mikeyb123]

Ah damn, just noticed earlier in the thread that you advised to upload the mg_cfg file too! I'll try that now

have you sorted now?

 

[chrissaces]

have you sorted now?

Yeah sorted it now... but after getting up at half 6 and messing about for ages my mate just told me the iPab image has been patched

 

[mikeyb123]

Yeah sorted it now... but after getting up at half 6 and messing about for ages my mate just told me the iPab image has been patched

oh ok no probs

 

[slimmy46]

Would anyone care to help me please?
I've flashed and all went well there its just not picking any channels up? What am i doing wrong please?

 

[leyther]

Did you save your line before you flashed then put it back on via ftp ?

Sent from my SM-J320FN using Tapatalk

 

[Linkk]

it's usually these mate you edit oscam.user / oscam.conf / oscam.server but if you have backed up your previous cline you just need to send them files over

if u edit them file has to be like this if converting newcamd to oscam

oscam.conf,oscam.server,oscam.user we need to edit the files


oscam.conf needs to make sure you have this part below in the files


[dvbapi]
enabled = 1
au = 1
pmt_mode = 3
user = dvbapiau
read_sdt = 1
boxtype = dreambox

[webif]
httpport = 83
httpuser = #>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Enter A user Name here to stop people getting into your oscam<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
httppwd = #>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Enter A password here again to make your oscam more securce <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
httprefresh = 10
httppollrefresh = 10
httphideidleclients = 0
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255



oscam.server needs to have this part in the file you can delete everything else in the file as you won't need it


[reader]
label = line_newcamd
protocol = newcamd
device = mydyndns,port #<<<<<<<<<<<<<<<<<<<<<<<<<the dynns part and port goes here just replace the one that is there the same way.
key = 0102030405060708091011121314
user = #<<<<<<<<<<<<<<<<<<<<<<<<<<<<your user name goes here
password = #<<<<<<<<<<<<<<<<<<<<<<<your password goes here
disableserverfilter = 1
fallback = 1
caid = 1841
ident = 1841:000000
group = 1
blockemm-unknown = 1



oscam.user needs to have this part. Again you can delete anything else in the file.


[account]
user = dvbapiau
caid = 1841
au = 1
group = 1
ident = 1841:000000

Hi Guys,

Managed to install the image fine but simply cannot get oscam working, I currently have a N line but want to use oscam in the hope that it fixes the audio narration issues. Any help would be most appreciated.