What's new
By:
Filters

No signal h5.2tc

P

Pintpot

Newbie
looking for a bit of advice.
I have two Zgemma’s h2s and a h2h both running with no problems. Recently purchased a h5.2tc did the usual setup but not getting any signal when I check via signal finder.
I have checked the line on my h2h getting 87 and on the h2s 84. But no matter what I do with the h5.2ct no signal.
Any ideas?
Thanks in advance
 
Signal finder on a sat or cable tuner box only works on the one tp that is showing at that time unless you try another channel.
Channel movement might have a signal on say bbc 1 and no signal when it moves.
Snr----------------------------------90%
Agc----------------------------------80%
Ber-----------------------------------0
On a working channel
Non working as no data 0


No signal can also mean hdmi cable not seeing a signal from box.
 
cactikid said:
Signal finder on a sat or cable tuner box only works on the one tp that is showing at that time unless you try another channel.
Channel movement might have a signal on say bbc 1 and no signal when it moves.
Snr----------------------------------90%
Agc----------------------------------80%
Ber-----------------------------------0
On a working channel
Non working as no data 0


No signal can also mean hdmi cable not seeing a signal from box.
Click to expand...
Hi cactikid,
Having some real problems with the h5.tc2 loaded woosh build no problem followed all the screen prompts just as I have done on the other boxes I have.
Set tuner a to not configured
Set tuner b
DVB-C
enabled
41048
Provider
United Kingdom
Virgin m all sys
No
Set tuner c the same
When I scan I get an error unable to scan tuner c please check it is configured correctly
I have checked everything but no joy.
Any ideas?
 
Last edited:
Sounds like its a 3 tuner box and
sat tuner A- not configured
Cable tuner B setup for virgin
C is not setup at all
 
cactikid said:
Sounds like its a 3 tuner box and
sat tuner A- not configured
Cable tuner B setup for virgin
C is not setup at all
Click to expand...
Yes correct it is a three tuner box
tuner a sat tuner set as not configured
Tuner b configured virgin
Tuner c configured virgin
Tuner b and c configured exactly the same.
But no joy

pabloescaban said:
on the H5.2tc, try updateing provider files in autobouquetsmaker, then run a scan
Click to expand...
ABM setup with the correct net I’d same as tuners.
But no joy
 
Last edited by a moderator:
cactikid said:
Do both tuners need a cable feed or internally split?
Click to expand...
Just one feed for B&C internal split

Is there anybody in the Lancashire area that could take a look at the box I would de available to take to them?
Or dose somebody have a h5.2tc running cable only that can send me a backup fron there box?

Thanks in advance
 
Last edited by a moderator:
Pintpot said:
No everytime i do a scan no channels found
Click to expand...
Is that a scan in ABM?
Does it return an error?
Or does it just not find any channels?
It's quite odd that it wouldn't find a single channel if it hasn't returned an error. Where abouts in Lancashire are you?
 
Pintpot said:
I have tried Tuner c not configured no joy.
i have also tried Tuner b not configured with tuner c configured no joy.
This is driving me mad
Click to expand...
I'll send you a link to your inbox for my backup of the H3.2TC (I'm going to assume it'll work for your box. Maybe someone can confirm before you go ahead and flash). I'm in Manchester, so maybe just edit the region in ABM / Providers and then try to run the scan again..
 
DavidL23 said:
Is that a scan in ABM?
Does it return an error?
Or does it just not find any channels?
It's quite odd that it wouldn't find a single channel if it hasn't returned an error. Where abouts in Lancashire are you?
Click to expand...

When I scan via ABM I get an error unable to scan tuner c please check it is configured correctly.
When i do a scan but not via ABM no channels found.
I live in Oswaldtwistle nr Accrington
 
You must log in or register to reply here.
Back
Top