1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Zgemma s2 stuck on boot but loads

Discussion in 'Zgemma-star 2S' started by Pick007, Dec 12, 2016.

  1. Pick007

    Pick007 Registered

    11
    3
    3
    Evening everybody.ive got a Zgemma s2 which as lost sound.Ive tried 2 different hdmi leads but still the same problem.so I've reflashed to see if it's sorts the problem out but I've still no sound.Ive reflashed with two different firmwares but still the same problem.the firmware loads every time and I get normal picture and can change channels but no sound still.when the firmware loads it's stay on boot and doesn't show any number counting up.
     
  2. asmad

    asmad Registered

    469
    40
    28
    Have you tried turning up the volume using the remote control for the zgemma?

    I know woosh was famous for his earlier builds being done at night with his boxes sound turned completely down
     
  3. Pick007

    Pick007 Registered

    11
    3
    3
    Yes volume's right up.just strange how I can flash it and get channels.but the box stays on boot but doesn't count up like it normally would do.
     
  4. cableconnect

    cableconnect Registered

    286
    68
    28
    Is it stuck in boot loop?
     
  5. Pick007

    Pick007 Registered

    11
    3
    3
    It is stuck in boot,but the image loads and I get channels and can go from bbc1 to itv with a picture but no sound.i understood that if it was stuck in boot loop the image wouldn't load.
     
  6. cableconnect

    cableconnect Registered

    286
    68
    28
    Does it say boot constantly on the receiver ?
     
  7. Pick007

    Pick007 Registered

    11
    3
    3
    Sorry yes mate
     
  8. moshibeth

    moshibeth TK Veteran

    2,120
    629
    133
    Male
    {roofer
    hampshire
    Try the sucumnsee backup image and see if that works
     
  9. cableconnect

    cableconnect Registered

    286
    68
    28
    Its stuck in boot loop then, you need to re flash it with a good image, this will overwrite the current image which is probably corrupted.

    Just make sure you have a copy of you server details before re flashing
     
  10. moshibeth

    moshibeth TK Veteran

    2,120
    629
    133
    Male
    {roofer
    hampshire
    He has reflashed it if you read post one
     
  11. Pick007

    Pick007 Registered

    11
    3
    3
    I've changed the original image with the problem to ipab 1.3 but same loads the image I can change channels but no sound and boot still on front of box.will try another image.thanks
     
  12. cableconnect

    cableconnect Registered

    286
    68
    28
    I was only pointing out he should re flash again as he's probably picked up some corruption from someones back up image :)
     
  13. dangerous

    dangerous TK Veteran

    3,146
    601
    133
    Male
    {Power Plant Operater
    UK
    Do you buy the receiver plug N play, already setup ?
     
  14. dangerous

    dangerous TK Veteran

    3,146
    601
    133
    Male
    {Power Plant Operater
    UK
    It's probably best to put an up to date image on it then.
    If you know what your doing then download the latest image from opena.tv
    You will need some additional files to complete the setup and possibly a guide to help you.
    Pm me your email address and I'll send you some information
     
  15. wheelo

    wheelo Super Moderator Staff Member Forum Supporter

    12,968
    1,236
    133
    {bus driver
    Dublin
    I have had the Boot word on my screen and it works perfectly, personally, it never bothered me as long as the box worked.
    As for the volume, if you have flashed Wooshbuild, he starts the volume at 0, it needs to be turned up on the zgemma remote

    And it DEFINITELY wasn't stuck in a boot loop
     
    Last edited: Dec 12, 2016
  16. Pick007

    Pick007 Registered

    11
    3
    3
    Just an update.reflashed with sucmnsee full back up image and its flashed with the time on the front of box now but still no sound!!!strange
     
  17. syman

    syman Registered

    86
    33
    18
    Is this on HD only or SD too.

    If HD only try switching digital downmix to on.

    on whooshbuild - its press yellow button, then green button then exit.