Biohead
Member
CABLE H2H - biohead image - OpenATV 5.1
LATEST 5.3 IMAGE CAN BE FOUND HERE: http://www.techkings.org/zgemma-star-h-2h/94055-biohead-image-openatv-5-3-vskin-cable-only.html
Below is for my old 5.1 based backup for reference.
Right guys, it's my turn to add something back to the community. Please go easy - it's my first go at this and I've probably made a glaring error somewhere! :beg:
Almost all the backup images for the zgemma boxes are setup for Sat. What I've tried to do, is create a very clean base image for us cable users. Huge thanks to Kiddac for his quick and easy guide to setting up an E2 box!
Download link at the bottom
- ZGemma H2H
- Based on OpenATV (updates work!)
- Cacheflush
- XMLImport + Rytec
- EPGRefresh (using PVR_EPG channel)
- Autobouquetsmaker
- RedHD skin (with plain bootscreens)
- EPG setup to save to external drive and load at 5am
- mgcamd 1.38
***How to Install + Setup*****
Flash as usual:
Extract the ZIP file to the root of a USB drive.
Turn your box off.
Insert USB into the port
Turn box on - front should say FLSH.
Get your line on. Image uses MGcamd, so newcamd.list format required (CWS =)
FTP your newcamd.list in to /usr/keys
Change to your area:
Menu>Setup>Service Searching>AutoBouquetsMaker>Providers
Change the area number in ABM to your area (default is 00013 Reading).
Press Green, and go to "Start Scan" - it should delete the existing bouquets then get the ones for your area.
***Things to do after install:***
If not already done, initialise your SD/USB
Menu>Setup>System>Storage Devices>Initialisation>Your Drive>Press Red
Once done, it's recommended to convert to Ext4 (but not required)
Double check Recording & Timeshift will save to your drive. If not, change it to your drive.
Menu>Setup>Recordings & Timeshift>Timeshift Settings>Timeshift Location
Menu>Setup>Recordings & Timeshift>Timeshift Settings>Autorecord Location
Menu>Setup>Recordings & Timeshift>Recording Settings>Default Movie Location
Double check EPG will save to your drive. Change if required.
Menu>Setup>EPG>Settings>EPG Location
It should be a case of flashing the image, add your nline (newcamd.list and mg_cfg), configure autobouquetsmakers for your area and off you go. It's pretty much a working base image with no extras - additional software will have to be installed yourself. You MAY have to swtich the EPG save location to your SD card rather than internal flash.
Things to check when you install:
Make sure swap is enabled and autostarts
Double check timeshifts + recordings are configure to SD card
EPG saves to SD card.
Most of these should be ok, but if it's the first time you're using the box the SD card likely isn't setup yet.
This is the very first time I've done this, so there might be a few issues! If you find anything, post and I don't mind trying to fix it! ROFL
I do like a clean base, but if there's any heavily requested apps I'll consider them for future releases.
Flash as usual:
20160402: https://www.dropbox.com/s/sryxzcz6o5zew60/biohead-h2h-cable-20160402.zip?dl=0
20160503 5.3 image: http://www.techkings.org/zgemma-star-h-2h/94055-biohead-image-openatv-5-3-vskin-cable-only.html
LATEST 5.3 IMAGE CAN BE FOUND HERE: http://www.techkings.org/zgemma-star-h-2h/94055-biohead-image-openatv-5-3-vskin-cable-only.html
Below is for my old 5.1 based backup for reference.
Right guys, it's my turn to add something back to the community. Please go easy - it's my first go at this and I've probably made a glaring error somewhere! :beg:
Almost all the backup images for the zgemma boxes are setup for Sat. What I've tried to do, is create a very clean base image for us cable users. Huge thanks to Kiddac for his quick and easy guide to setting up an E2 box!
Download link at the bottom
- ZGemma H2H
- Based on OpenATV (updates work!)
- Cacheflush
- XMLImport + Rytec
- EPGRefresh (using PVR_EPG channel)
- Autobouquetsmaker
- RedHD skin (with plain bootscreens)
- EPG setup to save to external drive and load at 5am
- mgcamd 1.38
***How to Install + Setup*****
Flash as usual:
Extract the ZIP file to the root of a USB drive.
Turn your box off.
Insert USB into the port
Turn box on - front should say FLSH.
Get your line on. Image uses MGcamd, so newcamd.list format required (CWS =)
FTP your newcamd.list in to /usr/keys
Change to your area:
Menu>Setup>Service Searching>AutoBouquetsMaker>Providers
Change the area number in ABM to your area (default is 00013 Reading).
Press Green, and go to "Start Scan" - it should delete the existing bouquets then get the ones for your area.
***Things to do after install:***
If not already done, initialise your SD/USB
Menu>Setup>System>Storage Devices>Initialisation>Your Drive>Press Red
Once done, it's recommended to convert to Ext4 (but not required)
Double check Recording & Timeshift will save to your drive. If not, change it to your drive.
Menu>Setup>Recordings & Timeshift>Timeshift Settings>Timeshift Location
Menu>Setup>Recordings & Timeshift>Timeshift Settings>Autorecord Location
Menu>Setup>Recordings & Timeshift>Recording Settings>Default Movie Location
Double check EPG will save to your drive. Change if required.
Menu>Setup>EPG>Settings>EPG Location
It should be a case of flashing the image, add your nline (newcamd.list and mg_cfg), configure autobouquetsmakers for your area and off you go. It's pretty much a working base image with no extras - additional software will have to be installed yourself. You MAY have to swtich the EPG save location to your SD card rather than internal flash.
Things to check when you install:
Make sure swap is enabled and autostarts
Double check timeshifts + recordings are configure to SD card
EPG saves to SD card.
Most of these should be ok, but if it's the first time you're using the box the SD card likely isn't setup yet.
This is the very first time I've done this, so there might be a few issues! If you find anything, post and I don't mind trying to fix it! ROFL
I do like a clean base, but if there's any heavily requested apps I'll consider them for future releases.
Flash as usual:
20160402: https://www.dropbox.com/s/sryxzcz6o5zew60/biohead-h2h-cable-20160402.zip?dl=0
20160503 5.3 image: http://www.techkings.org/zgemma-star-h-2h/94055-biohead-image-openatv-5-3-vskin-cable-only.html
Last edited: