28.2 SD Lines

Is this still working? I've tried with a couple of ex-sub Sky cards (red and white) and can't get it to clear.
Yes. 4Music, Local TV and London Live are opening in oscam with both red and white ex-sub cards.
The white card requires
disablecrccws = 1
The red card doesn't.
 
Yes. 4Music, Local TV and London Live are opening in oscam with both red and white ex-sub cards.
The white card requires
disablecrccws = 1
The red card doesn't.
hmm, I can't seem to get it working on both an old red and white card (both cards still work in an old Sky box)

Logs are:
2022/01/05 20:33:19 56FFADC9 r (reader) skyuk [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=500)
2022/01/05 20:33:19 56FFADC9 r (reader) skyuk [internal] Reader sci internal, detected box type: h5
2022/01/05 20:33:19 56FFADC9 r (reader) skyuk [internal] card detected
2022/01/05 20:33:24 56FFADC9 r (reader) skyuk [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 16 69 FF 4A 50 D0 80 00 53 59 03
2022/01/05 20:33:30 56FFADC9 r (reader) skyuk [internal] Warning: needed try nr 2, next ECM has some delay
2022/01/05 20:33:30 56FFADC9 r (reader) skyuk [internal] card system not supported
2022/01/05 20:33:30 56FFADC9 r (reader) skyuk [internal] Normal mode failed, reverting to Deprecated Mode
2022/01/05 20:33:36 56FFADC9 r (reader) skyuk [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 16 69 FF 4A 50 D0 80 00 53 59 03
2022/01/05 20:33:53 56FFADC9 r (reader) skyuk [internal] Warning: needed try nr 2, next ECM has some delay
2022/01/05 20:34:00 56FFADC9 r (reader) skyuk [internal] card system not supported
2022/01/05 20:34:00 56FFADC9 r (reader) skyuk [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2022/01/05 20:34:00 56FFADC9 r (reader) skyuk [internal] card initializing error

Any help would be greatly appreciated!
 
hmm, I can't seem to get it working on both an old red and white card (both cards still work in an old Sky box)

Any help would be greatly appreciated!

What oscam version are you using and what is your [reader] config? There is obviously something wrong if the card is not even identified.
The ATR is correct.
 
What oscam version are you using and what is your [reader] config? There is obviously something wrong if the card is not even identified.
The ATR is correct.

Oscam r11695-798

[reader]
label = skyuk
protocol = internal
device = /dev/sci0
boxid = 01234567
detect = cd
mhz = 500
cardmhz = 500
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

Thanks for your help
 
No idea what's going on.

Whether softcam issue or just so little cards left that very few servers around.

Was thinking maybe remaining channels could be going dark soon but more think about it don't think so.
 
The channels are still working The high ecm times which where causing freezing and timeouts Are back to 0.04 ms which is good for oscam
 
Is there any way/plug-in to have certain channels switch to iptv if the ecm is too high/fails to clear?
 
Hows everyone getting on? On both CCcam and Oscam, only a handful of channels are working mainly the Asian. Gold is not working.

Are others getting better luck?
 
Using the latest version of OScam 1.20 svn build
r11704 The log is not looking good high ecm times 0906D7A5:0501 very poor
 
Back
Top