ADDING OSCAM TO OPENVIX

moshibeth

TK Veteran
TK Supporter
Just a quick guide as may save me and you guys some time, Tried and tested. My most user friendly method to make things easier for who ever needs to add line details (y)

GUIDE BELOW
Config file goes into etc/tuxbox (attached)

Download which ever Osacm required from feeds or ftp across to the box
1) Go into softcam manager and change the cam to oscam-emu- tick to enable on startup using blue button (start oscam)
2) Type your ip address into your browser and it will give you an openwebif screen
3) Scroll down and click on Oscam Webinterface
4) Click on config (Tick) both as below and then scroll down to the bottom and save
Drop duplicate users:
Skip CWs checksum test:
5) Click on readers and you will see both sky_line and virgin_line protocol (newcamd)
6) you will see a pencil looking icon at the end of each line
7) Click on the one that applies

Openwebif infill guide, Enter your own details. Same for ccccam just different protocol

Enter techkings.co.uk,20201 (Host,port) into Device

Enter ------- into Userame

Enter ------ into Password

Key should have 0102030405060708091011121314

Bottom of the screen save- go into softcam manager and restart cam (LIKE ME AND MY TK BUDDY BAZZA) (BINGO)

More to follow if asked and i will continue to support
 

Attachments

  • oscam-emu.zip
    3 KB · Views: 128
Last edited:
I am new to the world of linux receivers but have been a sat enthusiast since the early analogue days. I have just bought a Vu UNO 4K SE and have it all set up on my motorised 80cm dish and all working well. I have the latest Oscam Emu installed and can read my white sly card ok and have biss working including 27.5w. I have worked through many threads on PowerVu auto roll and have put the recommended reader in my server file and the required details in the conf file. I have not been able to clear any SIS channels and am at a complete loss. Should this be possible? I have followed the instructions at the start of this thread but still not having any success. I would appreciate any help experienced users can offer this beginner thank you.
 
I am new to the world of linux receivers but have been a sat enthusiast since the early analogue days. I have just bought a Vu UNO 4K SE and have it all set up on my motorised 80cm dish and all working well. I have the latest Oscam Emu installed and can read my white sly card ok and have biss working including 27.5w. I have worked through many threads on PowerVu auto roll and have put the recommended reader in my server file and the required details in the conf file. I have not been able to clear any SIS channels and am at a complete loss. Should this be possible? I have followed the instructions at the start of this thread but still not having any success. I would appreciate any help experienced users can offer this beginner thank you.
Your box will not read genuine sky cards for premium channels just a few freeview ones
 
Your box will not read genuine sky cards for premium channels just a few freeview ones
Yes I am aware of this my white card just opens London Live and a few other channels, but it is Powervu I really would like to get working.

This is my oscam.server emu section

[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,2600,2602,2610,1841
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
dropbadcws = 1
disablecrccws = 1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000

Is something wrong or is there another file I need to edit?
 
i use this for powervu

this goes in the oscam.server

make sure you have the latest softcam.key (or keep them updated yourself)1_0_1_514_1_5E_30B022_0_0_0_20210116083517.jpg

[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0BAA,0B00,0B01,0D05,0D95,0D96,0D97,0100,0500,0604,0624,0629,0648,09C4,09CD,093B,098C,093E,090F,091F,0919,0940,0960,0961,0963,1010,1702,1722,186C,183D,183E,1801,1802,1803,1810,1811,1814,1815,1819,1830,1833,1834,1861,1880,1883,1884,4AEE,4AFC,4AE1,1010,2600,FFFF,FFFE,0E00
detect = cd
ident = 0BAA:000000;0B00:000000;0B01:000000;0D05:000000;0D95:000004,000010;0D96:000000,000004;0D97:000000;0100:000000,00006A,00006C,00006D,000068;0500:000000,023800,040810,042820,043300,043800,032A00,030B00;0604:000000;0624:000000;0629:000000;0648:000000;09C4:000000;09CD:000000;093B:000000;098C:000000;093E:000000;090F:000000;091F:000000;0919:000000;0940:000000;0960:000000;0961:000000;0963:000000;1010:000000;1702:000000;1722:000000;186C:000000;183D:000000;183E:000000;1801:000000,007301,001101,002111;1802:000000;1803:000000;1810:000000;1811:000000,003311,003315;1814:005211;1815:000000;1819:00006D;1830:000000;1833:000000;1834:000000;1861:000000;1880:000000;1883:000000;1884:000000,000068;4AEE:000000;4AFC:000000;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000;FFFE:FFFFFE;0E00:000000
group = 1
emmcache = 1,5,31,1
saveemm-u = 1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000;2610:000000
emu_datecodedenabled = 1
 
i use this for powervu

this goes in the oscam.server

make sure you have the latest softcam.key (or keep them updated yourself)View attachment 57671

[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0BAA,0B00,0B01,0D05,0D95,0D96,0D97,0100,0500,0604,0624,0629,0648,09C4,09CD,093B,098C,093E,090F,091F,0919,0940,0960,0961,0963,1010,1702,1722,186C,183D,183E,1801,1802,1803,1810,1811,1814,1815,1819,1830,1833,1834,1861,1880,1883,1884,4AEE,4AFC,4AE1,1010,2600,FFFF,FFFE,0E00
detect = cd
ident = 0BAA:000000;0B00:000000;0B01:000000;0D05:000000;0D95:000004,000010;0D96:000000,000004;0D97:000000;0100:000000,00006A,00006C,00006D,000068;0500:000000,023800,040810,042820,043300,043800,032A00,030B00;0604:000000;0624:000000;0629:000000;0648:000000;09C4:000000;09CD:000000;093B:000000;098C:000000;093E:000000;090F:000000;091F:000000;0919:000000;0940:000000;0960:000000;0961:000000;0963:000000;1010:000000;1702:000000;1722:000000;186C:000000;183D:000000;183E:000000;1801:000000,007301,001101,002111;1802:000000;1803:000000;1810:000000;1811:000000,003311,003315;1814:005211;1815:000000;1819:00006D;1830:000000;1833:000000;1834:000000;1861:000000;1880:000000;1883:000000;1884:000000,000068;4AEE:000000;4AFC:000000;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000;FFFE:FFFFFE;0E00:000000
group = 1
emmcache = 1,5,31,1
saveemm-u = 1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000;2610:000000
emu_datecodedenabled = 1


Hi gilvey, I am learning about the PowerVU keys. can you please help me to update the soft,key file. I have found the keys but not sure which format to enter.

For example ,

here I found one key. But what information I enter in my soft.key file? I know how to update Biss keys but not sure how to enter these.

Discovery Networks
4.8* E 12360 V 27500
0.8° W 12303 V 27500
Key 00: 18 68 6A DB 01 7F C1
Key 01: 75 D5 DD 57 20 48 7C



cheers
 
The softcam.key file should already have the keys in. If they change you can update them via oscam webinterface and replace them. You can also do it via remote using dream Explorer
 
The softcam.key file should already have the keys in. If they change you can update them via oscam webinterface and replace them. You can also do it via remote using dream Explorer

The file is empty . I had my only couple of keys which I created for Biss feeds but nothing else. could you plz send me your softcam.key file if possible? of where I can download the file which can open the Animal Planet channel like your post above?
 
The softcam.key file should already have the keys in. If they change you can update them via oscam webinterface and replace them. You can also do it via remote using dream Explorer
Newer oscam versions can downlod softcam.key file it is setting in oscam.server
latest is enigma2-plugin-softcams-oscam_11.682-emu-r798_all

Code:
[reader]
label                         = emulator
enable                        = 1
protocol                      = emu
device                        = emulator
device                        = https://raw.githubusercontent.com/MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key
caid                          = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect                        = cd
ident                         = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group                         = 5
emmcache                      = 2,2,2,0
emu_auproviders               = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
 
Newer oscam versions can downlod softcam.key file it is setting in oscam.server
latest is enigma2-plugin-softcams-oscam_11.682-emu-r798_all

Code:
[reader]
label                         = emulator
enable                        = 1
protocol                      = emu
device                        = emulator
device                        = https://raw.githubusercontent.com/MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key
caid                          = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect                        = cd
ident                         = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group                         = 5
emmcache                      = 2,2,2,0
emu_auproviders               = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE

I have the soft.key file but I am more after what goes inside that file? Don't know how a working powervu line looks like. The one which needs updating daily ?
 
Im on number 5 in the guide,

5) Click on readers and you will see both sky_line and virgin_line protocol (newcamd)

But not seeing any readers
 
Im on number 5 in the guide,

5) Click on readers and you will see both sky_line and virgin_line protocol (newcamd)

But not seeing any readers
@moshibeth will be along shortly im sure.

But this is an old guide moshi instructed you to transfer the configs to etc/tuxbox

You need his attached files FTP'd over to etc/tuxbox/config
 
Back
Top