Amiko 8150 cant put in cline

[kingblue]

Can anyone please help i got firmware from a place called lava something but i cant find where to put the line in this box at all

 

[crmorris2]

you have to install the correct emu's for it, download these two files here and here, unzip both, find the .abs files and copy to a fat32 formatted pen drive then follow the below instructions I copied from another site. good luck

Now we go to the box, insert the flash drive in the back. start the box and go to the menu, Upgrade By USB. where it says File Patch, leave as uda. Then where it says File Upgrade must select the file ".abs" we downloaded, either the EMU or the MCAS. select Upgrade Mode: Software + Bootloader, we will use the arrow keys on the remote from right to left. Once selected + Software Bootloader, down to the Start option and give the OK. Now you will begin to install our firmware in the box, meanwhile a percentage progress bar appears. While the deco is in progress of installation is very important not to disconnect, as it may jam.

Reboot box and install your server :-)

 

[kingblue]

hi thanks for this buddy i have just done this however i am unable to find anywhere to put in my actual line.

 

[GIORGOS70]

I just upgrade my box(AMIKO_HD8150_2.2.03_emu.zip) but select only software update and not Software + Bootloader.
Do I have to make the procedure again with Software + Bootloader????

The box is working fine but in order to be sure please advise

thank you in advance

 

[Dellbuy]

Hello
i have Amiko 8150 and lately it stopped working and now I've cleared the line I was connected with and I don't know what to do now
any ideas how to get it back it only works on fta channels now any info would be great
thanks
Dellbuy

 

[scoob197]

Hello
i have Amiko 8150 and lately it stopped working and now I've cleared the line I was connected with and I don't know what to do now
any ideas how to get it back it only works on fta channels now any info would be great
thanks
Dellbuy

I think you may get more luck if you started your own topic/thread

I dont know anything about your box but have you nothing you can look back on like an old email with the line details on it?
May be an email address of your provider so you can ask them?
Or can you restore a backup on your box that has the line?

edit
if its gone you can request another in here:
http://www.techkings.org/general-sa...mmend-good-server-satellite-october-only.html

 

[dillyp70]

Hello
i have Amiko 8150 and lately it stopped working and now I've cleared the line I was connected with and I don't know what to do now
any ideas how to get it back it only works on fta channels now any info would be great
thanks
Dellbuy

Do you have a copy of it to reinstall??

 

[Dellbuy]

Thanks
no I have nothing but ill try to restore or backup but I won't hold my breath
thanks again

 

[dillyp70]

You need to contact yhe person you brought your line ftom and ask for a copy of it.
Or if you have made a full backup as you say install that mate.