Bookies channels 4.8e
- Thread starter afterburn
- Start date
pieeater2015
TK Veteran
Google latest softcam.key and you will need oscam-emu to open them
afterburn
Member
its not really bringing up what i need.
this is what i have in oscam server
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 090F,0500,1801,0604,0E00,4AE1,1010,09BE,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;0E00:000000,000002;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid = 000E00
its not opening them though,
pieeater2015
TK Veteran
pieeater2015
TK Veteran
I am using OSCam r11703-798 emu
afterburn
Member
Thanks mate,
Ill try that so.
pieeater2015
TK Veteran
I have attached the latest keys under the picture
afterburn
Member
still not clearing for some reason.
should I delete all softcams and start from scratch do you think.
Is there anything else I need to edit.
pieeater2015
TK Veteran
I would and delete the Config folder in etc/tuxbox and let the new oscam create it.make sure you have a copy of your line details.
Once installed and keys sent across, go to the channel and restart oscam
afterburn
Member
Ok Ill try that later . Thanks.
Kurdt Kobain
Member
Any joy afterburn? I tried myself without any luck.
afterburn
Member
I'm afraid not. I spent ages at it.
I actually have a different receiver which it does work on. It has worked for years on it.
It's something to do with the config files I'm certain.
I'm reluctant to mess with the one that's working in case I knock it off.
Someone years ago sent me the config files to begin with but I can't find them.
Now you would think I could just copy the working ones but it's not happening.
Baffling.
spanner123
Member
If you are using oscam- emu delete the emu reader and restart oscam. It will create a new one and if you are using the softcam.key posted above it should work.
afterburn
Member
pieeater2015
TK Veteran
Its in oscam.server
looking at the picture you posted of oscam you have three readers for EMU running,Try turning the first two off.
Did you upgrade your Oscam-emu?
looking at the picture you posted of oscam you have three readers for EMU running,Try turning the first two off.
Did you upgrade your Oscam-emu?
afterburn
Member
At this stage I forget what I done.
I did a back up of my box before I started and restored it when it didnt work.
I have a euroline running as well might this be the issue although it isnt on the other box?
here are those 3 readers.
Shall I delete the first 2?
or the last 2?
# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11518-796
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt
[reader]
label = constant.cw
enable = 1
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1FFF,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 3
[reader]
label = emulator
protocol = emu
device = /usr/keys/SoftCam.Key
disablecrccws_only_for = 0E00:000000
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
[reader]
label = AFN
description = AFN-EMU
protocol = emu
device = emulator
caid = 0E00
ecmwhitelist = 0E00:99
detect = cd
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
Similar threads
- Locked
- Sticky
