WilloBuild Box stuck on boot

imzy82

Registered
Hi Guys,

Got a fresh Zgemma H7S box flashed onto Openvix, tried flashing Willo just stuck on boot.

What shall I do to get out of this?

HELP!!!
 

Willo3092

VIP Member
Forum Supporter
Format a USB stick with this:
http://www.willobuild.net/files/Utilities/Preparing Flash Drives.zip

Download and extract the recovery file to your USB stick:
https://www.openvix.co.uk/openvix-builds/zgemmah7/openvix-5.3.035.release-zgemmah7_recovery_emmc.zip

Power off and remove all USB sticks and insert the newly prepared stick into a USB2 slot (white)
Power on whilst holding in the little button under the front flap until flashing starts.

Power off when it finishes and remove the flash drive and then restart.
My settings backup can then be restored.
 

imzy82

Registered
Hi Willo, successfully flashed, just took me to the openvix bootlogo at startup.

so basically I gotta start from scratch again?
 

Willo3092

VIP Member
Forum Supporter
If you skip through the setup menus the willobuild files should still be on the hdd.
From the main screen press:
MENU > SETUP > VIX > BACKUP MANAGER and you should be able to restore the Willobuild settings.

I still have custom bouquets enabled so you will need to:

In CustomMix importer change auto fetch to no then delete file and green to save.

Now goto ABM providers set sky uk your area SD Custom and scan
 
Top