Buy a FORMULER TIVIAR ALPHA+ TRIPLE TUNE.

Kuul Media

FORUM SPONSOR
£109 From Kuul Media Website


2018-11-07_16-50-08.jpg

product1.png
product2.png

PURCHASE HERE.

SPECIFICATIONS

Tunner & Channel Decoder (Satellite, Twin DVB-S2)

Input Connector : F-type, IEC 169-24, Female
Loop through out : F-type, IEC 169-24, Female
Frequency Range : 950MHz - 2150MHz
Input Impedance : 750, unbalanced
Signal Level : -65 to -25dBm
LNB Power : 13/18VDC, max,400mA
22KHZ Tone : (22±2)KHz. (0.6±O.2)V
DISEqC Control : Vi .0/1 .2/USALS Compatible
Demodulation : QPSK / 8PSK
Input Symbol Rate : 2 ~45 Ms/s(DVB-S2) 2~30 Ms/s(8PSK Turbo)
FEC Decoder : 1/4, 1/3, 2/5, 1/2, 3/5, 213, 3/4.4/5, 5/6, 8/9, 9/10
(QPSK of DVB-S2)
3/5, 2/3, 3/4. 5/6, 8/9,9/10 (8PSK of DVB-52
Changeable 3rd Tuner & Channel Decoder (Cable, DVB-C)

Input Connector : IEC-DIN female
Loop through out : IEC-DIN male
Frequency Range : 50MHz~1 GHz
Input Impedance : 75Ω, unbalanced
Modulation Format : 16, 32, 64, 128, 256 QAM(for Annex A/C)
64, 256 QAM(for Annex B)
l/F Bandwidth : 8 MHz(-3dB) typ(for Annex A/C)
6 MHz(-3dB) typ(for Annex B)
Symbol Rate : 1 Msps~7 Msps(for Annex A/C)
5.057 Msps(for 64QAM, Annex B)
5.361 Msps(for 256QAM, Annex B)
MPEG Transport Stream A/V Decoding

Transport Stream : H.264(MPEG-4 part 10), MPEG-4 part2, AVC and MPEG-2
MPEG-4 Part 10 ISO/IEC 14496-10, MPEG-2 ISO/IEC 13818-2
Profile Level : H.264/AVC Main and High profile @L4.2, MPEG-2 MP @HL
VC-1 Advanced pofile @ L3
input Rate : Max.125Mbit/s
Video Formats : 4:3Letter Box,4:3 PanScan, 16:9
Video Resolution : 720 x 576i, 720 x 576p 720 x 480i,720 x 480p
1280x 720p, 1920x1080i, 1920x 108p
Audio Decoding : Dolby Digital Dolby Digital Plus, MPEG-1 Layer 1,2 and 3(MP3)
Audio Mode : Stereo/Mon Dolby digital and MPEG audio
Sampling Rate : 16KHz, 32KHz, 44.1KHz and 48KHz(According to input)
Main System

Main Processor : MIPS core with 1.3GHz
Memory : Flash-ROM :512 MB (4Gb)
SDRAM: 1GByte (DDR3)
EEPROM :256 Byte
Audio/ Video & Data IN/OUT

TV SCART : RGB, CVBS Video, Audio L,R Output
RCA : CVBS Video Output. Audio L/R Output
YPbPr Component Video Output (up to 1080p)
HDMI : Video & Audio Output
OPTIC : AC3 Dolby Digital (SPDIF)
RS-232C : 9-pin D-SUB (Male) type, Transfer rate 115Kbps
USB : USB 2.0 Host Support (1 Front & 3 Rear)
ETHERNET : Rj45connector, 1Gbps
e-SATA : Extemal SATA HDD Support
Front Panel

Slot : 1 USB 2.0 Host Slot
2 Common Interface PCMCIA Slot
2 Smart Card Slot
Display : VFD (Vacuum Fluorescent Display) - 12 Digital
Buttons : 3 Buttons(Standby, CH UP/DOWN)
Power Supply

Input Voltage : AC 100~ 250V, 50/60Hz
Type : SMPS
Power Consumption : Max. 65W
Standby Power : Max. 1W
Protection : Separate Internal Fuse & Lighting protection
Physical Specification

Size(WxHxD) : 340mm X 60mm X 250mm
Weight (Net) : 2.0 Kg
Operating Temp. : 0°C~ +45°C
Storage Temp. : -10°C~ +70°C
 
Last edited by a moderator:

jarymek

Registered
Hi , i cant get to work on both s1 and s2 on openatv 6,2 also 6.3 .... with plugin i have to get.Thank you
 

Kuul Media

FORUM SPONSOR
@jarymek,

Please tell us what tuner configuration you have on OpenATV? You'll will find this via: Menu/settings/service searching/tuner configuration.
Also please upload of this menu screen and your wiring on the back of the device.
 

jarymek

Registered
Hi, this is my tuner settings and wiring at back of it. Is running on openatv 6.3 but when was 6.2 also never have both s1 and s2 work. Thank you
IMG_20191013_210036.jpgIMG_20191013_210325.jpg
 

cactikid

VIP Member
Forum Supporter
On my openvix i had
Tuner A
Config.mode Simple
Mode Single
Sat 28.2

Tuner B would be setup the same assuming both feeds are 28.2.
 

woody6222

TK Veteran
Forum Supporter
l posted from memory and worded ir wrong in fact he has it set 'Equal to tuner A ' As in his first pic' and i said in my post to leave as is and try. Free eye test at spec savers (y)
 

jarymek

Registered
Try Tuner A single
Sat 28.2
leave Tuner B as is
Disable Tuner C
Re-scan VIA ABM

See how you go
Hi, you are heroo mate
I have now both s1 and s2
I have set both on hotbird 13e. And now I noticed some of additional channels starting to work on...
Great
I have some more questions...
I like put on DiSEqC 13 and 28.2 is any easy way to setup or I get my self in deep water... Thanks a lot
 
Last edited:

cactikid

VIP Member
Forum Supporter
All 3 lol
motorised with quad feed
fixed on 28.2 octo feed on sky dish
90cm covering 13 and 19.2 both with quad feeds.
 
Top