dsayers2014
VIP Member
Please note this is for the 2s h1 and h2 not for the new models h.2s or h.2h
dsayers vix3.2036
vix3.2036 for the zgemma star 2s with kiddacs slyk1hd v3.008
Check here for slyk1hd updates http://www.techkings.org/zgemma-star-2s/84606-slyk-1-hd-sly-skin-version-3-now-available.html
and mgcamd1.38 and cccam2.30 with setup guide
no streaming plugins but are easy to install
new way to download it
ftp this imagebackups file to media/hdd/
menu
setup
vix
image manager
blue to restore
or if using the usual usb flash with the zgemma on a formatted usb stick turn of box using back power button insert usb in back and switch on using back button then box should change from usb to flash
download the backup here
Set with mgcamd1.38. & cccam2.3 and with all mg_cfg and newcamd.list and CCcam.cfg files needed in place! Just edit your details in and reboot! DO NOT SEND YOUR FILES IN. EDIT WHATS ALREADY THERE!
Do not online update Vix on any box from Airsat (ibox/zgemma). I have updates turned off anyway.
OK. Basically u need a usb or hard drive that can be wiped and devoted to the box.
That will store program guide and recordings and timeshift to rewind TV etc.
4gb is minimum I'd recommend. But more is better.
Once image is flashed and u edit ur newcamd.list file in usr/keys or CCcam.cfg in /etc with filezilla.
Get the permanent USB/hdd onto a PC and quick format it.
USB/ HARD DRIVE SETUP
Box off.
Usb in rear.
Box on.
Menu
Setup
System
Storage devices
Initialisation
Select ur drive
Red to initialise
Then convert ext3 to 4
Exit all
Menu
Setup
Vix
Swapfile manager
Blue to create 256mb. Wait
Yellow to autostart
Green to start
Red to close.
Hold power button on remote for 3 secs and select Restart (not GUI)
If you find that the screen is to large/small/off to side :
Menu
Setup
System
User interface
Position setup
U can change about here. Including transparency of windows.
If not working change to 720p and 50hz and try again.
(If u are using a large enough usb/HDD u may want to go to
Menu
Setup
System
Timeshift settings
Autostart ts after 30secs or whatever.
As it is u must press pause to start timeshift)
ZGEMMA DISHCABLE'S SETTUP
plug one dish cable into tuner A. and the second cable into B.
or
plug single cable in to A. turn B off.
menu, setup, service searching,Tuner configuration,
set Tuner B: not configured or if using cable set tuner b cable
TO SETUP ABM
Menu
Setup
Service searching
Autobouquets maker
Providers. Wait
Sky UK (sd):area. Change from north west custom to your area custom by pressing right or left.
You may want to go down and change sky uk channel swap to no if you don’t have bbc and itv hd versions in your are
Green to save.
Start scan. Wait.
Exit all
Hold power Restart
TO SETUP EPG
Menu
setup
System
Epg
Cross EPG
Download now. Takes 5-10 mins. Will seem like its stuck on Loading Data. Wait.
Happens automatically at 6.20 am anyway.
Exit all
Hold power again and restart.
slyk1hd v3.008 updated with epg tabs
auto bouqets setup
auto epg update set
cross epg setup to hdd
Includes mgcamd, cccam, openwebif, picture player, Media scanner, permanent vfd clock and cachflush
to install picons
google and find a picon folder.
copy the picon folder to hdd main folder.
graphical infobar epg settings.
change service title mode to picon and service name.
then graphical epg settings.
change service title mode to picon and service name.
Then channel selection settings.
show picons In service list. Change to yes.
Idiots Guide for adding your line with Filezilla
On your Box Menu > Info> Network > Get your box IP address
Open up Filezilla Host (top left ) Type in IP address Username root Leave others blank Press Quickconnect
Box should then connect to computer Left side computer, Right hand box
For N lines
On right hand side locate usr Double click it Then Keys Double click It You should now see 2 files Mg and Newcamd list On Newcamd list Left click/right click Then click View/Edit ( It may ask you what program you wish to view the file choose Notepad) You will see 1 sample of what your line should look like either edit your line details or Delete up to CWS = (space either side of = )
Copy and past your line Less the N: in its place
Disconnect from Filezilla By Clicking the X just under bookmarks top of page
Press blue button on remote control >.Softcam Manager Select Mg 1.38 and start cam Restart box (not with GUI)
For C lines
Instead of usr/keys on box Your line goes Complete with the C in the Ect folder on box and select CCcam and start in Softcam manager and restart box
Hope it helps
screen shots below
splash screen
boot screen
info screen
plugins
epg with epg tabs
channel select
dsayers vix3.2036
vix3.2036 for the zgemma star 2s with kiddacs slyk1hd v3.008
Check here for slyk1hd updates http://www.techkings.org/zgemma-star-2s/84606-slyk-1-hd-sly-skin-version-3-now-available.html
and mgcamd1.38 and cccam2.30 with setup guide
no streaming plugins but are easy to install
new way to download it
ftp this imagebackups file to media/hdd/
menu
setup
vix
image manager
blue to restore
or if using the usual usb flash with the zgemma on a formatted usb stick turn of box using back power button insert usb in back and switch on using back button then box should change from usb to flash
download the backup here
Code:
https://db.tt/fIVzcUJaSet with mgcamd1.38. & cccam2.3 and with all mg_cfg and newcamd.list and CCcam.cfg files needed in place! Just edit your details in and reboot! DO NOT SEND YOUR FILES IN. EDIT WHATS ALREADY THERE!
Do not online update Vix on any box from Airsat (ibox/zgemma). I have updates turned off anyway.
OK. Basically u need a usb or hard drive that can be wiped and devoted to the box.
That will store program guide and recordings and timeshift to rewind TV etc.
4gb is minimum I'd recommend. But more is better.
Once image is flashed and u edit ur newcamd.list file in usr/keys or CCcam.cfg in /etc with filezilla.
Get the permanent USB/hdd onto a PC and quick format it.
USB/ HARD DRIVE SETUP
Box off.
Usb in rear.
Box on.
Menu
Setup
System
Storage devices
Initialisation
Select ur drive
Red to initialise
Then convert ext3 to 4
Exit all
Menu
Setup
Vix
Swapfile manager
Blue to create 256mb. Wait
Yellow to autostart
Green to start
Red to close.
Hold power button on remote for 3 secs and select Restart (not GUI)
If you find that the screen is to large/small/off to side :
Menu
Setup
System
User interface
Position setup
U can change about here. Including transparency of windows.
If not working change to 720p and 50hz and try again.
(If u are using a large enough usb/HDD u may want to go to
Menu
Setup
System
Timeshift settings
Autostart ts after 30secs or whatever.
As it is u must press pause to start timeshift)
ZGEMMA DISHCABLE'S SETTUP
plug one dish cable into tuner A. and the second cable into B.
or
plug single cable in to A. turn B off.
menu, setup, service searching,Tuner configuration,
set Tuner B: not configured or if using cable set tuner b cable
TO SETUP ABM
Menu
Setup
Service searching
Autobouquets maker
Providers. Wait
Sky UK (sd):area. Change from north west custom to your area custom by pressing right or left.
You may want to go down and change sky uk channel swap to no if you don’t have bbc and itv hd versions in your are
Green to save.
Start scan. Wait.
Exit all
Hold power Restart
TO SETUP EPG
Menu
setup
System
Epg
Cross EPG
Download now. Takes 5-10 mins. Will seem like its stuck on Loading Data. Wait.
Happens automatically at 6.20 am anyway.
Exit all
Hold power again and restart.
slyk1hd v3.008 updated with epg tabs
auto bouqets setup
auto epg update set
cross epg setup to hdd
Includes mgcamd, cccam, openwebif, picture player, Media scanner, permanent vfd clock and cachflush
to install picons
google and find a picon folder.
copy the picon folder to hdd main folder.
graphical infobar epg settings.
change service title mode to picon and service name.
then graphical epg settings.
change service title mode to picon and service name.
Then channel selection settings.
show picons In service list. Change to yes.
Idiots Guide for adding your line with Filezilla
On your Box Menu > Info> Network > Get your box IP address
Open up Filezilla Host (top left ) Type in IP address Username root Leave others blank Press Quickconnect
Box should then connect to computer Left side computer, Right hand box
For N lines
On right hand side locate usr Double click it Then Keys Double click It You should now see 2 files Mg and Newcamd list On Newcamd list Left click/right click Then click View/Edit ( It may ask you what program you wish to view the file choose Notepad) You will see 1 sample of what your line should look like either edit your line details or Delete up to CWS = (space either side of = )
Copy and past your line Less the N: in its place
Disconnect from Filezilla By Clicking the X just under bookmarks top of page
Press blue button on remote control >.Softcam Manager Select Mg 1.38 and start cam Restart box (not with GUI)
For C lines
Instead of usr/keys on box Your line goes Complete with the C in the Ect folder on box and select CCcam and start in Softcam manager and restart box
Hope it helps
screen shots below
splash screen
boot screen
info screen
plugins
epg with epg tabs
channel select
Last edited: