Enigma 2 Firmware for Sab unix triple hd and Zgemma H.2h + few questions

PH086

Registered
Hi
I currently have a Sab unix triple hd box with Enigma 2 from vix4e2project install version 2015

Q: I want to update this box if possible i think its a clone or amiko alien 2. I dont know whats a good build or even how to install on this box.

Q: The Sab box freezes alot when playing a recording from a powered HDD. would a SWAP file help with this?

Q: Has vix4e2projects closed down as the website keeps redirecting?

I have ordered a Zgemma H.2h for the spare room. what build would be good for this box

Thanks for any help given.
 

formandvoid

TK Veteran
Forum Supporter
Your sab unix triple is a bit dated now and processor only 450mhz but if just for satellite it should be ok. You may be able to add wooshbuild Infinity to this but I would probably just use standard Open Atv on this one. You can use the Open Atv image and you can download that from here
http://images.mynonpublic.com/openatv/current/index.php?open=sabtriple.
To install it, download the file, then extract the file using WinRAR and copy the extracted folder onto a formatted usb stick. Plug usb into your box and turn it on. Not sure on your box but normally you will see usb on the box display and you press the power button on the box and it should say flsh. Then follow on screen instructions. The Zgemma H2h you could use wooshbuild Infinity and the instructions are here http://www.techkings.org/threads/wooshbuild-infinity-for-all-enigma2-boxes.140702/ and just post if you need any further help.
 

PH086

Registered
Your sab unix triple is a bit dated now and processor only 450mhz but if just for satellite it should be ok. You may be able to add wooshbuild Infinity to this but I would probably just use standard Open Atv on this one. You can use the Open Atv image and you can download that from here
http://images.mynonpublic.com/openatv/current/index.php?open=sabtriple.
To install it, download the file, then extract the file using WinRAR and copy the extracted folder onto a formatted usb stick. Plug usb into your box and turn it on. Not sure on your box but normally you will see usb on the box display and you press the power button on the box and it should say flsh. Then follow on screen instructions. The Zgemma H2h you could use wooshbuild Infinity and the instructions are here http://www.techkings.org/threads/wooshbuild-infinity-for-all-enigma2-boxes.140702/ and just post if you need any further help.
The open Atv build for the Sab are they Daily builds ?

thanks for the answers
 
Top