Z

[craiglouth1]

How do I type this the right way into my zgemma receiver?

 

[pieeater2015]

053.391 North
002.173 west

 

[Ferret.]

It looks to me like your motor is out of alignment on its mounting pole . In other words the whole motor dish assembly needs rotating around its mounting pole to correct it.

To do that set your usuals upto 53.400 north and 2.2 west and send the dish to 0.8 west you will probably have no signal based on what you saying. Climb up to your dish and loosen the uclamps holding your motor to it mounting pole. Now move the whole dish-motor assembly east to west around its mounting pole ( small movements) till you peak the signal then tighten and recheck that signal is still at maximum.

Youll track the arc better if you tweak it that way.

 

[craiglouth1]

Thank you I will give it a go,I didn't setup it up but there's no harm in trying😁

 

[Ferret.]

If you have not got a signal meter a tv near the the dish site might help or the signal meter app on your phone if your wifi reaches the dish site. Ive even used facetime with the wifes phone pointed at that tv.

Mark the position of the motor on its pole with a maker pen then you can always return to were you started.

 

[craiglouth1]

I have digital meter I will try that,if I can't do it I wilk get a sat man out to help,thanks again.

 

[craiglouth1]

Yes has no signal,but soon as you put it to 1 West comes on

 

[Bluemoon2020]

053.391 North
002.173 west

I hope he has not given his home address on a public fourm .

 

[pieeater2015]

I hope he has not given his home address on a public fourm .

Call round for a brew