H5.2TC How do I set up with 2 satellite dishes.

adamsm

Member
Here is my scenario I'm using a zgemma h5.2tc twin cable tuner and single satellite tuner...

Currently I have sky UK 28.2, but I also want to put a dish up for 19.2E Sky.De which I'll connected together with a DISEqC 4X1. However when you select DISEQC in the tuner setting it does not bring bouquets up to configure for the 19.2e.

Is there workaround or would I need to get a twin satellite tuner box?
 
you would need to setup abm or the likes to bring up the bouquets
and im pretty sure, abm will need to see some sort of signal to work first
 
Last edited:
You will need to get your other sat dish up first before box is setup.
I got an extra dish put up and old sky sat dish on 13 removed.
My new dish is fixed 80cm with 2 quads 19.2 and 13 and i have a 28.2 feed from other sat to a 4 way diseqc.
I just load vhannibal auto setting for my wanted sats from plugin feeds
 
No what I mean is usually per tuner you select your frequency then in providers you can select what you want per frequency. However using a single even with diseqc it defaults it only displays the provider for the first frequency
 
Set up - tuner - manually set up for 19.2
You won't be able to do this until you have the other LNB set up.
You may not need another dish, if you only have a single tuner why not use a monoblock LNB
 
Back
Top