bonus2010
VIP Member
Radio Code Entry Procedure
There are two main methods used in entering the code. The first is using the radio station presets [1-4] to nudge each digit of the code required to be displayed, followed by pressing another key to enter the code, where the radio is activated. The other method is similar to dialling a phone number using the presets, where upon entering the last digit of the code, the radio is automatically activated.
Here are some examples for the more popular cars.
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] How to enter radio code on models -
(ESRT32PS) (2001) (2005 89FB-18K876-AB) (2008 93AB-18K876-BB)[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] Example code is 150
Switch radio on, display should show three flashing lines - - -
If lines are not flashing the wrong code has been entered and the radio
is locked out, to unlock leave radio switched on for up to 3 hours.
(normally only takes 5-10 minutes depending on number of wrong
codes entered. When lines start flashing go to step 1.
1. Press (1) until display shows 1 - -
2. Press (2) until display shows 1 5 -
3. Press (3) until display shows 1 5 0
4. Press (4) - the radio should now come on. If you make a mistake
Go back to step 1[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] How to enter radio code on models -
(2006 RDS 91FB-18K876-AA) (2006 RDS 92FB-18K876-AA)
(2006 RDS 93FB-18K876-GB) (2008 93AB-18K876-BB)[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] Example code is 1506
Switch radio on, display should show code
then four flashing lines - - - -
If the car Registration number is displayed press select to continue.
If lines are not flashing the wrong code has been entered and the radio
is locked out, to unlock leave radio switched on for up to 3 hours.
(normally only takes 5-10 minutes depending on number of wrong
codes entered. When lines start flashing go to step 1.
1. Press (1) until display shows 1 - - -
2. Press (2) until display shows 1 5 - -
3. Press (3) until display shows 1 5 0 -
4. Press (4) until display shows 1 5 0 6
5. Press (SELECT) - the radio should now come on. If you make a mistake
Go back to step 1[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] How to enter radio code on models -
2040 93AB-19B160-AC[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] Example code is 1506
Switch radio on, display should show four flashing lines - - - -
If lines are not flashing the wrong code has been entered and the radio
is locked out, to unlock leave radio switched on for up to 3 hours.
(normally only takes 5-10 minutes depending on number of wrong
codes entered. When lines start flashing go to step 1.
1. Press (AMS>>) until display shows 1 - - -
2. Press (SCAN) until display shows 1 5 - -
3. Press (PLAY/STOP) until display shows 1 5 0 -
4. Press (<<REW) until display shows 1 5 0 6
5. Press (SHUFFLE) - the radio should now come on. If you make a mistake
Go back to step 1[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] How to enter radio code on models -
(3000 2 CH 96FP-18K876-EB) (3000 2 CH 96FP-18K876-EC)
(3000 TRAFFIC 96FP-18K876-FC) (3000 TRAFFIC XS6F-18K876-BA)
(4000 TRAFFIC 97FP-18K876-GA) (5000 RDS 96AP-18K876-AC)
(5000 RDS 96AP-18K876-CA) (5000 RDS 96AP-18K876-CC)
(5000 RDS 97AP-18K876-LA) (5000 RDS 97AP-18K876-NA)
(5000 RDS 98AP-18K876-BA) (6000 CD 97AP-18C815-HA)
(6000 CD 98AP-18C815-CA) (7000 RDS 95GB-18K876-BA)
(7000 RDS 95GB-18K876-BC) (7000 RDS 97AP-18K876-EA)[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] Example code is 1506
Switch radio on, display should show four flashing lines - - - -
If the car Registration number is displayed press select to continue.
If lines are not flashing the wrong code has been entered and the radio
is locked out, to unlock leave radio switched on for up to 3 hours.
(normally only takes 5-10 minutes depending on number of wrong
codes entered. When lines start flashing go to step 1.
1. Press (1) until display shows 1 - - -
2. Press (2) until display shows 1 5 - -
3. Press (3) until display shows 1 5 0 -
4. Press (4) until display shows 1 5 0 6
5. Press (5) - the radio should now come on. If you make a mistake
Go back to step 1
Note: If the display shows Lock 13 try holding (5) for 10 seconds
If the display still shows Lock 13 you will have to send it to our workshop
for unlocking.[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] How to enter radio code on Vauxhall/Opel models -
CAR200, CAR400, CAR2002, CDR500, CDR2005 and most fitted to Vauxhall/Opel[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] Press and hold the [AS] key then switch on
'SAFE' will display momentarily followed by '10 - - - -'
Press preset [1] repeatedly for the first digit
Press preset [2] repeatedly for the second digit
Press preset [3] repeatedly for the third digit
Press preset [4] repeatedly for the fourth digit
To save the code press and hold the [AS] key to accept. (a beep is usually heard).[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] How to enter radio code on Renault - Philips[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] RENAULTS WITH RADIO STEERING WHEEL CONTROLS
Switch Radio On - Display Shows 'CODE' quickly followed by
" 0000 " with the 1st digit flashing
Rotate " Thumbwheel " For FIRST Correct Digit displayed
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For SECOND Correct Digit displayed
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For THIRD Correct Digit displayed
Press " ¬ " On The Stalk Control To Enter
Rotate Thumbwheel " For FOURTH Correct Digit displayed
If the correct code number is now shown on the display
Press And Hold " ¬ " Until A Beep Is Heard (typically 3 seconds)[/TD]
[TD="class: table_body"]
[/TD]
[TD="class: table_body"] FOR RENAULT WITHOUT STEERING CONTROL
Press preset [1] repeatedly for the first digit
Press preset [2] repeatedly for the second digit
Press preset [3] repeatedly for the third digit
Press preset [4] repeatedly for the fourth digit
Followed by pressing preset [6] or [5] to save the code to accept.[/TD]
There are two main methods used in entering the code. The first is using the radio station presets [1-4] to nudge each digit of the code required to be displayed, followed by pressing another key to enter the code, where the radio is activated. The other method is similar to dialling a phone number using the presets, where upon entering the last digit of the code, the radio is automatically activated.
Here are some examples for the more popular cars.
[TD="class: table_body"]
[TD="class: table_body"] How to enter radio code on models -
(ESRT32PS) (2001) (2005 89FB-18K876-AB) (2008 93AB-18K876-BB)[/TD]
[TD="class: table_body"]
[TD="class: table_body"] Example code is 150
Switch radio on, display should show three flashing lines - - -
If lines are not flashing the wrong code has been entered and the radio
is locked out, to unlock leave radio switched on for up to 3 hours.
(normally only takes 5-10 minutes depending on number of wrong
codes entered. When lines start flashing go to step 1.
1. Press (1) until display shows 1 - -
2. Press (2) until display shows 1 5 -
3. Press (3) until display shows 1 5 0
4. Press (4) - the radio should now come on. If you make a mistake
Go back to step 1[/TD]
[TD="class: table_body"]
[TD="class: table_body"] How to enter radio code on models -
(2006 RDS 91FB-18K876-AA) (2006 RDS 92FB-18K876-AA)
(2006 RDS 93FB-18K876-GB) (2008 93AB-18K876-BB)[/TD]
[TD="class: table_body"]
[TD="class: table_body"] Example code is 1506
Switch radio on, display should show code
then four flashing lines - - - -
If the car Registration number is displayed press select to continue.
If lines are not flashing the wrong code has been entered and the radio
is locked out, to unlock leave radio switched on for up to 3 hours.
(normally only takes 5-10 minutes depending on number of wrong
codes entered. When lines start flashing go to step 1.
1. Press (1) until display shows 1 - - -
2. Press (2) until display shows 1 5 - -
3. Press (3) until display shows 1 5 0 -
4. Press (4) until display shows 1 5 0 6
5. Press (SELECT) - the radio should now come on. If you make a mistake
Go back to step 1[/TD]
[TD="class: table_body"]
[TD="class: table_body"] How to enter radio code on models -
2040 93AB-19B160-AC[/TD]
[TD="class: table_body"]
[TD="class: table_body"] Example code is 1506
Switch radio on, display should show four flashing lines - - - -
If lines are not flashing the wrong code has been entered and the radio
is locked out, to unlock leave radio switched on for up to 3 hours.
(normally only takes 5-10 minutes depending on number of wrong
codes entered. When lines start flashing go to step 1.
1. Press (AMS>>) until display shows 1 - - -
2. Press (SCAN) until display shows 1 5 - -
3. Press (PLAY/STOP) until display shows 1 5 0 -
4. Press (<<REW) until display shows 1 5 0 6
5. Press (SHUFFLE) - the radio should now come on. If you make a mistake
Go back to step 1[/TD]
[TD="class: table_body"]
[TD="class: table_body"] How to enter radio code on models -
(3000 2 CH 96FP-18K876-EB) (3000 2 CH 96FP-18K876-EC)
(3000 TRAFFIC 96FP-18K876-FC) (3000 TRAFFIC XS6F-18K876-BA)
(4000 TRAFFIC 97FP-18K876-GA) (5000 RDS 96AP-18K876-AC)
(5000 RDS 96AP-18K876-CA) (5000 RDS 96AP-18K876-CC)
(5000 RDS 97AP-18K876-LA) (5000 RDS 97AP-18K876-NA)
(5000 RDS 98AP-18K876-BA) (6000 CD 97AP-18C815-HA)
(6000 CD 98AP-18C815-CA) (7000 RDS 95GB-18K876-BA)
(7000 RDS 95GB-18K876-BC) (7000 RDS 97AP-18K876-EA)[/TD]
[TD="class: table_body"]
[TD="class: table_body"] Example code is 1506
Switch radio on, display should show four flashing lines - - - -
If the car Registration number is displayed press select to continue.
If lines are not flashing the wrong code has been entered and the radio
is locked out, to unlock leave radio switched on for up to 3 hours.
(normally only takes 5-10 minutes depending on number of wrong
codes entered. When lines start flashing go to step 1.
1. Press (1) until display shows 1 - - -
2. Press (2) until display shows 1 5 - -
3. Press (3) until display shows 1 5 0 -
4. Press (4) until display shows 1 5 0 6
5. Press (5) - the radio should now come on. If you make a mistake
Go back to step 1
Note: If the display shows Lock 13 try holding (5) for 10 seconds
If the display still shows Lock 13 you will have to send it to our workshop
for unlocking.[/TD]
[TD="class: table_body"]
[TD="class: table_body"] How to enter radio code on Vauxhall/Opel models -
CAR200, CAR400, CAR2002, CDR500, CDR2005 and most fitted to Vauxhall/Opel[/TD]
[TD="class: table_body"]
[TD="class: table_body"] Press and hold the [AS] key then switch on
'SAFE' will display momentarily followed by '10 - - - -'
Press preset [1] repeatedly for the first digit
Press preset [2] repeatedly for the second digit
Press preset [3] repeatedly for the third digit
Press preset [4] repeatedly for the fourth digit
To save the code press and hold the [AS] key to accept. (a beep is usually heard).[/TD]
[TD="class: table_body"]
[TD="class: table_body"] How to enter radio code on Renault - Philips[/TD]
[TD="class: table_body"]
[TD="class: table_body"] RENAULTS WITH RADIO STEERING WHEEL CONTROLS
Switch Radio On - Display Shows 'CODE' quickly followed by
" 0000 " with the 1st digit flashing
Rotate " Thumbwheel " For FIRST Correct Digit displayed
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For SECOND Correct Digit displayed
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For THIRD Correct Digit displayed
Press " ¬ " On The Stalk Control To Enter
Rotate Thumbwheel " For FOURTH Correct Digit displayed
If the correct code number is now shown on the display
Press And Hold " ¬ " Until A Beep Is Heard (typically 3 seconds)[/TD]
[TD="class: table_body"]
[TD="class: table_body"] FOR RENAULT WITHOUT STEERING CONTROL
Press preset [1] repeatedly for the first digit
Press preset [2] repeatedly for the second digit
Press preset [3] repeatedly for the third digit
Press preset [4] repeatedly for the fourth digit
Followed by pressing preset [6] or [5] to save the code to accept.[/TD]
