imputting a line manually

[howard2333]

Hi ive installed woosh build and I'm trying to put my line in, problem ive got is that the line I have received was not an image file, I know I have to somehow put the codes on maybe using note pad and use fileziller. this is for a h2s. can anybody direct me to a step by step for dummies

 

[Burlesy]

Yes it is easy
Step 1:
Determine what line you have
does your line (code) start with C: or N: or CWS = ?
N line = N: or CWS =
C line = C:

Step 2:
Put your line in the file
Now you need to put your line in a file

two types of file:
newcamd.list - N lines (If your line starts with N: Replace is so it starts with (CWS = ) - Make sure there is a space either side of the "=" symbol
cccam.cfg - C Lines

open notepad
paste your line into the notepad
save as
for n lines:
File name: newcamd.list
save as type: All Files (not .txt)
for c lines:
File name: cccam.cfg
save as type: All Files (not .txt)

Step 3
put the file on the USB.
copy the file you just created onto the usb stick (be sure that it isn't in any folders on the usb stick, just the root directory.)
now plug the usb into the front port of the zgemma
it will come up with : "No displayable files on this medium found!" which is fine.
press the GREEN button > navigate to the USB Cam Importer & hit ok
then all should be done

 

[asmad]

download sinkers new line creator. It automatically transfers the line to the correct folder

 

[rayrat]

Where you get sinker new line creator from sorry bit new to this dummy lol

 

[Brian Fearon]

Yes it is easy
Step 1:
Determine what line you have
does your line (code) start with C: or N: or CWS = ?
N line = N: or CWS =
C line = C:

Step 2:
Put your line in the file
Now you need to put your line in a file

two types of file:
newcamd.list - N lines (If your line starts with N: Replace is so it starts with (CWS = ) - Make sure there is a space either side of the "=" symbol
cccam.cfg - C Lines

open notepad
paste your line into the notepad
save as
for n lines:
File name: newcamd.list
save as type: All Files (not .txt)
for c lines:
File name: cccam.cfg
save as type: All Files (not .txt)

Step 3
put the file on the USB.
copy the file you just created onto the usb stick (be sure that it isn't in any folders on the usb stick, just the root directory.)
now plug the usb into the front port of the zgemma
it will come up with : "No displayable files on this medium found!" which is fine.
press the GREEN button > navigate to the USB Cam Importer & hit ok
then all should be done

Tried this above and worked a treat for me (replacing N: with CWS = ), my premium channels are all good now !!