Mag 322 no block

Format a USB Stick to FAT32.

Create a folder on Usb.

The folder must be labeled mag322
In the mag322 folder place imageupdate file you downloaded.

Unplug the power from the
322 for 5 seconds.

Plug in your USB Key at the back
of 322.

Press and hold the menu key on the remote.

Then plug the power back in
while still keeping hold of the menu button on the remote.

When the BIOS screen shows up navigate to Update.

Chose the Update by USB option and click Yes.

The update will take few minutes


Which file are you using? because happen the same that the user above

STB Model:MAG324
Date:Sun Jan 13 15:34:53 GMT 2019
Image Version:302
Image Description:NOBLOCK_324
VerUpdateAPI:2
Kernel size:5161163
Image size:133325063
Env size:161 138486226
Start data...


could you share the file for 322?

thanks
 
maybe the solution is to install the oldest original firm and then try with this one patched?
Which file are you using? because happen the same that the user above

STB Model:MAG324
Date:Sun Jan 13 15:34:53 GMT 2019
Image Version:302
Image Description:NOBLOCK_324
VerUpdateAPI:2
Kernel size:5161163
Image size:133325063
Env size:161 138486226
Start data...


could you share the file for 322?

thanks
 

Attachments

  • 4593f3f8-0bb6-4259-847b-928de5d0c275.JPG
    4593f3f8-0bb6-4259-847b-928de5d0c275.JPG
    163.7 KB · Views: 15
I've got similar issues. I've managed to do flash using a noblock firmware but all I then get is a black screen when it reboots (after the infomir page). If I try the latest firmware from infomir, I get the unsupported architecture message when trying to flash.

I am only getting these issues on the mag322w1 boxes with the sp/dif audio output on the back. The 322's that I have that don't have the sp/dif flash ok using the same usb stick and firmware. I'm confused
 
Back
Top