Mag256 Recording

Smithy882

Registered
Hi,
Could someone please. Lear something up for me. I have red that you can record on the Mag254 but not on the Mag256, is this correct? Or can you also record on the Mag256?

Thanks
 
Sponsored Links

dummer

Registered
I tried out the mag 256 and yes you can record I did a few test ones but only on inner portal ie from your m3u file on usb..played back fine..
Was not able to record on main portal.
Ended up sending it back it kept freezing all the time when trying to navigate inner portal etc..was pulling my hair out..also box got very hot..
 

moshibeth

TK Veteran
This should help


this will show you how to put playlist m3u file in a MAG device.

In the internal software. Editing the channel list

>Enter to “IPTV Channels”
>Activate the menu by pressing the «menu» on the remote control.
>In the menu select “GROUP” → “Edit Mode”.
>“New Entry” (blue button on the remote control).
>In the dialog box enter the necessary data.
>Name: Channel name (actual or desired).
>URL: «solution» «URL address channel».
>Save your entries - «Save».

To edit the channel select «Edit Entry» (yellow button on the remote control).
To delete the channel select «Delete Entry» (The green button on the remote control).

>Exit the edit mode «Quit» (The red button on the remote control).
>Confirm to save changes

To play streaming

Streaming specification shall be as follows: rtp space(gap) URL.

for example:
Code:
rtp udp://10.20.30.40:1234
rtp rtp://10.20.30.40:1234
For access to the stream with RTSP-serverspecification shall be as follows: rtsp space(gap)URL.

For broadcasting http

for example:
Code:
ffmpeg http://10.10.30.40:12434
It is also possible to use “Solution» - fm, ffrt, ffrt2, ffrt3. Depending on the type of streaming.

>Save your entries - «Save».

To edit the channel select «Edit Entry» (Yellow button on the remote control).
To delete a channel select «Delete Entry» (The green button on the remote control).

>Exit the edit mode «Quit» (The red button on the remote control).
>Confirm to save changes «Save».

Loading a default channel list from the server.
>Enter to “IPTV Channels”
>Activate the menu by pressing the «menu» on the remote control.
>From the menu choose “Download …”
>Enter URL - full address of the file containing the list of default channels.
for example:
Code:
http://192.168.1.1/chanlist.m3u
If the channel list is not loaded:
>incorrect address (URL);
>no connection to the server;
>file with that name on the server was not found;
>file has an incorrect format.

Load a previously created list from a USB drive or via SMB / NFS
>Open file format *.m3u from a USB drive or from the available network resources (USB-storages «mount» automatically in «Media Browser» or «Home Media», Local Area Net resources are available in SMB-browser-«SAMBA» in «Media Browser» or«Home Media»);
>When you open the answer to the question about the encoding of the file;
>Save the list of channels;
>If you refuse to save the channel list, you can select the channels (F3 button on remote or“menu” - “Select All”) and add them to the“IPTV Channels” - “menu” - “Copy” - “TV”button on remote - “menu” - “Paste”

File Format: m3u, UTF-8 encoding (recommended)
 
Top