WilloBuild New h7s box

John_eire

Newbie
Hi all

got a new h7s box
having trouble set it up
when I go to flash online keep getting messages. (no enough space )

i then when to set up the hdd
but still get same fault
going to attach pictures of what I’ve done so far ,

also when I do it via openvix usb download
I download the it fat32 Kingston 16gb
i didnt unzip the files just copied straight on to usb
but keep getting no readable files or something like that

any suggestion
I know I’m not doing it correctly
thanks
 

Attachments

  • BCF69CAE-3FD6-402C-BE22-98392AF4D6DB.jpeg
    BCF69CAE-3FD6-402C-BE22-98392AF4D6DB.jpeg
    2.7 MB · Views: 16
  • B3637CF3-C043-4201-A050-DBFEAA57FAB4.jpeg
    B3637CF3-C043-4201-A050-DBFEAA57FAB4.jpeg
    2.3 MB · Views: 16
  • 868B50F5-50DE-4C7A-81FC-1F7A2929A4D3.jpeg
    868B50F5-50DE-4C7A-81FC-1F7A2929A4D3.jpeg
    2.8 MB · Views: 16
If you want to flash it online, you need the usb in the box, and it needs to be initialised, you can do this with the remote, menu setup system, storage device and initialise it from there. Then flash online
 
Rule of thumb for my build and Grogbuild is that you need your storage mounted as /media/hdd and preferably formatted as Ext4 R/W
 
Try using the recovery menu,your screen shows openatv6.0 use 6.4 or other builds shown in the menu list..

Turn box off,white button pressed out.
Now point your remote at the box holding down the red power button.
Now press the white button on so the box starts but keep remote pressed.
Release red power button when you see rcy on front display.
This will now load recovery menu.

When recovery menu appears,scroll down to bootmenu.ok
scroll to flash online image,ok
Choose which image you want,ok
let it download and it will ask what partition you want to use.
Then it will flash,follow on-screen instructions,initialize usb.
If using openatv 6.4
Fully flash then set password.
 
also when I do it via openvix usb download
I download the it fat32 Kingston 16gb
i didnt unzip the files just copied straight on to usb
but keep getting no readable files or something like that

If you want to flash plain ViX use this code from Putty:

wget --no-check-certificate -O install_vanilla_vix.sh https://www.willobuild.net/files/scripts/install_vanilla_vix.sh?dl=1 && bash install_vanilla_vix.sh

If you're flashing from USB you need to flash the recovery image. not the usb version. This will wipe all partitions though.
Extract the recovery image to the usb stick. Insert the stick and power the box on whilst holding the little button under the front flap until FLSH appears on the display.
 
Last edited:
Hdd should be seen in storage and mounts if setup correctly.

Any times i flash by usb on VIX files are extracted to an 8gb max size like Cruzer , Integral , Kingston and into a box powered off and no other usb devices plugged in.
 
Right lads
thanks for everything so far (I'm fight with this since yesterday)
where I’m at
up-to openatv 6.3
have the kiddc Slyk skin
hdd is up and running

what I’d like to do next is get my channels like that use to be (will attach pictures from old box)
(will also attach picture of the new h7s box)

and also need to get Xc download for iptv

thanks
 

Attachments

  • F6F90BAF-84F8-42CD-8F6C-EB32107E7E2C.jpeg
    F6F90BAF-84F8-42CD-8F6C-EB32107E7E2C.jpeg
    2.2 MB · Views: 18
  • F2CDF94D-ADD4-47A1-8CB6-06588EBD4903.jpeg
    F2CDF94D-ADD4-47A1-8CB6-06588EBD4903.jpeg
    2.2 MB · Views: 18
Right lads
thanks for everything so far (I'm fight with this since yesterday)
where I’m at
up-to openatv 6.3
have the kiddc Slyk skin
hdd is up and running

what I’d like to do next is get my channels like that use to be (will attach pictures from old box)
(will also attach picture of the new h7s box)

and also need to get Xc download for iptv

thanks
Openatv 6.3 is outdated, you need 6.4.

Once installed you can install xc from the command line
 
Thanks for replying
Update to 6.4

how do I get my channels list back to it use to look like (pictures 2 above )

sorry what’s a command line .?
How did you get to 6.3?
Click blue button, scroll right and down to Flash local/online and install 6.4.

To get channels back you need to contact your IPTV provider and install the plugin he told you to use, some use xc, some use jedimaker or a different one
 
How did you get to 6.3?
Click blue button, scroll right and down to Flash local/online and install 6.4.

To get channels back you need to contact your IPTV provider and install the plugin he told you to use, some use xc, some use jedimaker or a different one
sorry should have been clearer in my reply

have it up to 6.4

thanks for clearing up the channel thing
 
Morning all

I’m still fightin/struggling to get xtreme editor up loaded

where im at
ive done a openatv 6.3 recovery Emmc download on to usb and flash box,
followed the Enigma 2 setup in the guides
The reason I downloaded the old openatv was hoping that when I went under green button green button and into system plug-in or Extensions i could download XE — but their is no plugin in either,

im fine with the Enigma 2 guide until it gets to the XE download thing
I don’t fully understand what goes on then
I don’t have a windows computer, only have a ipad and iMac
so when I copy and paste link it doesn’t open the link,

So What I did was in the website rocksoildlines download the link and put it onto a usb and flash it onto the box
it goes onto the box but when I go to open the XE it just sit their and doesn’t open (I’ve attached picture)

is there another way to get XE
because to be honest I don’t understand all this putty thing etc

i dont mind what image I use just want to get channels back

Any help would be appreciated
dont mind paying for someone to email me something that I can download onto a usb

Thanks
 

Attachments

  • 2496A932-7284-4452-B2FD-2C8FC58C97A8.jpeg
    2496A932-7284-4452-B2FD-2C8FC58C97A8.jpeg
    949.8 KB · Views: 11
Back
Top