What's new
By:
Filters

Satellite no ip address

M

mikejc

Member
Hi Guys

my zgemma h7s was working fine , on monday I took it out and also took router
out

as we are having work done in the house , so all had to be moved .
on friday evening I plugged all back in again

now my h7s has no ip address , the box is plugged straigh into the router
which is a few feet away ,

I tried many different cables which all worked on other devices , when I go into
my router page , I can see the box has a lan connection

I even reflashed it with openatv 6.3 , it was on 6.2 .. have had the box 3 yrs with
no other problems .

I also have a h92 , but that is stuck on openatv boot screen and wont reflesh after I tried to
update it last yr from openatv 6.2 to 6.3 , any help would be grateful guys

Mike
 
mikejc said:
Hi Guys

my zgemma h7s was working fine , on monday I took it out and also took router
out

as we are having work done in the house , so all had to be moved .
on friday evening I plugged all back in again

now my h7s has no ip address , the box is plugged straigh into the router
which is a few feet away ,

I tried many different cables which all worked on other devices , when I go into
my router page , I can see the box has a lan connection

I even reflashed it with openatv 6.3 , it was on 6.2 .. have had the box 3 yrs with
no other problems .

I also have a h92 , but that is stuck on openatv boot screen and wont reflesh after I tried to
update it last yr from openatv 6.2 to 6.3 , any help would be grateful guys

Mike
Click to expand...
Unplug the router.
Wait 5 minutes before powering it back on, also unplug the H7.
When the router has finished flashing and settled down, plug the box back in and check ip address.

The H9 will flash if you use a USB with openatv 6.4 on it
 
pabloescaban said:
Unplug the router.
Wait 5 minutes before powering it back on, also unplug the H7.
When the router has finished flashing and settled down, plug the box back in and check ip address.

The H9 will flash if you use a USB with openatv 6.4 on it
Click to expand...
thanks Pablo will try that now .

I tried 6.4 too with no luck
 
pabloescaban said:
Unplug the router.
Wait 5 minutes before powering it back on, also unplug the H7.
When the router has finished flashing and settled down, plug the box back in and check ip address.

The H9 will flash if you use a USB with openatv 6.4 on it
Click to expand...
tried that still the same Pablo , even restarted network , its so weird

pabloescaban said:
Does anything come on screen when you boot it up?
Click to expand...
when I try to flash it , I see the front flashing and then I let go of reset button
it stays red , then the scree logo of open atv comes on

have tried with 3 kingston usb's I have . I know they work as I used it to flash
the h7 yesterday
 
mikejc said:
when I try to flash it , I see the front flashing and then I let go of reset button
it stays red , then the scree logo of open atv comes on

have tried with 3 kingston usb's I have . I know they work as I used it to flash
the h7 yesterday
Click to expand...
Try flash online.
Put the USB in and initialise it.
Then use remote
Press Blue
Flash online
Follow onscreen instructions
 
pabloescaban said:
Try a different USB.
SanDisk are a few quid from Asda. :LOL:

On the H7, what settings do you have in Adapter Settings?
Menu
Setup
System
Network
Device setup
Adapter settings
Click to expand...
lan connection

use interface yes
use DHCP yes
Use manual dns- nameserver no

current setting

ip address to gateway N/A

primary and secondry dns 0.0.0.0
 
mikejc said:
lan connection

use interface yes
use DHCP yes
Use manual dns- nameserver no

current setting

ip address to gateway N/A

primary and secondry dns 0.0.0.0
Click to expand...
This isn't the box at fault it's the router.
Unplug the ethernet cable and try it in a different port on the router
 
pabloescaban said:
This isn't the box at fault it's the router.
Unplug the ethernet cable and try it in a different port on the router
Click to expand...
ok will the good news is I got h9s flashed with openatv 6.4 .
but the bad news is , its coming up the same as h7

no ip address , tried all the ports , I know they are all working as pc is
pluggedinto the router also

not sure what the hell is wrong :(
 
mikejc said:
ok will the good news is I got h9s flashed with openatv 6.4 .
but the bad news is , its coming up the same as h7

no ip address , tried all the ports , I know they are all working as pc is
pluggedinto the router also

not sure what the hell is wrong :(
Click to expand...
Run network wizard and change dhpc to no then set Google nameservers

8.8.8.8 and 8.8.4.4
 
You'll have to go into the router settings and check what's going on.
Has someone changed it to WiFi only or some other weird setting?
Do the zgemmas connect to Internet?
 
dsayers2014 said:
Run network wizard and change dhpc to no then set Google nameservers

8.8.8.8 and 8.8.4.4
Click to expand...
good news got ip address , we have a router and , a live box from orange .
as we dont have fibre from orange they are going through movistar firbe

I put the cable into the live box and that done the trick , just need to reflash
my old image back on the h7 again ,

hate messing around with cccam etc , will sort that tomorrow .

thank you for helping me Pablo , am very grateful bud :)
 
You must log in or register to reply here.
Back
Top