No signal 28e

Drive your dish to 0.8 west If you can excess the dish check the l bracket supporting
The dish is plum or if you have digital lever
Check it is 90 degrees Check the motor brackets are tight Elevation bolts at side off the dish and the dish brackets Drive the dish
To 28 east Excess the dish Hold the dish at the top and bottom bend up slightily with out
Un doing and bolts get someone to check
The s.n.r on 28 east to see if your signal improves If so your dish elevation has moved
 
Move the dish east and west to maximise the
Signal slacken the elevation adjustment bolts
Peak the signal retighten the bolts
 

Attachments

  • 15651284236856753657259818789802.jpg
    15651284236856753657259818789802.jpg
    4.4 MB · Views: 8
Hi i check astra 23 and seen I was getting no signal on that so i back.on to a woods so took the top brancescof a tree and i am getting 86 signal and 100 quality and still the channel wont clear?
 
Hi I have just took a picture of the the elevation that it is set on it is badly rusted I see on linesman guide for setting up a dish for Liverpool which is where I am elevation is 37 it looks like its on 35 maybe 36 right? what do you guys think20190807_204416(0).jpg
 
So it’s meant to be 37 and it’s set to 35. Can’t say it’s that’s the whole problem
But it’s showing it’s not setup right
 
which ones do I unscrew I am a real newbie to this the sat was set up by my uncle about 15 years ago. Thanks20190807_211339.jpg
 
You 6 points on that setup which could be wrong


So you get 28. Do you get 0.8 and how strong is a signal
 
Then it’s not lined up right
I had that when doing my motor

If it was me I would pull it down pull it apart and stat from scratch
Make sure all is lined up

Dish need turned to the left
 
Back
Top