openbox v5s antenna setup help

[faceache]

hi folks,:fartlight:
couldn't really find a thread about this and have tried Google with no luck - after setting my box up successfully i couldn't resist in having a look and messing with a few settings,
after being in antenna settings i noticed when i messed with the transponder settings i got a better signal quality from 32% to 70% with a 90%intensity my issue is it doesn't seem to save i exit but goes back to original settings is there a way to save

antenna menu settings
satellite 1/1 sky uk 28a
lnb freq universal 9750-10600
transponder 27/88 11261 h 27500 ......... new setting transponder 29/88 11307 v27500 (how to save setting?)

cheers for any help
FaceAche:smoke rings:

 

[webby06]

don't think there is any way of saving it unless you can go into satellite list and edit sky uk 28a

 

[faceache]

don't think there is any way of saving it unless you can go into satellite list and edit sky uk 28a

yh its a strange one its allowing me to adjust but there is no save

 

[crmorris2]

Each frequency has a different signal, you dont need to save it, because when you switch channels it goes to that frequency, just because that frequency has a higher signal doesnt mean you can save it for all channels. Each channel has a different frequency and different signal strengths.

 

[Kremmen]

As crmorris2 says, the transponder selected in the TP list corresponds to the channel you are watching at the time. You cannot change it to another.

To see which channels use which transponders, see KOS:-

Astra 2A / Astra 2C / Astra 2D / Astra 2E / Astra 2F / Eutelsat 28A (28.2°E) - All transmissions - frequencies - KingOfSat

 

[faceache]

Managed to figure it

Cheers