What's new
By:
Filters

Picture setting preferences SkyBox F3

grover2000

grover2000

Newbie
Hi is there any better picture settings for SkyBox F3 for a 50" plasma or are the default values the best settings?

Would anyone like to share their preferences?

Any help on the matter are greatly appreciated

Grover
 
depends on what plasma you have i use box contrast 45 box brightness 55 and leave the rest i found this best on a lg tv with tv settings like contrast set at 100 and tv brightness 70
 
I have a LG 50pk350 Plasma tv. I have found the picture to be more blue and red. Just looking for a balanced colour.

Any help on the matter is greatly appreciated.

Grover
 
lgs are difficult to get a real good picture on with this box i just changed my brightness and contrast to get what i wanted i like high colour so that wasnt a problem for me try turning you colour on the tv set down if you find a good settings post back because i wont mind a good setting myself lol good look

---------- Post Merged at 10:18 AM ----------

i used expert on my lg and changed the colour settings try these
Color Temperature: Warm
Method: 2 Points [see below]
Pattern: Outer
Red Contrast: -18
Green Contrast: 0
Blue Contrast: -10
Red Brightness: -17
Green Brightness: -22
Blue Brightness: 25

---------- Post Merged at 10:19 AM ----------

and set colour to 52
 
Hi I tried the settings on my tv but not great on my set.

So I have gone with the following setting from another website. Not my work.

Go into MENU, then PICTURE. Go down to PICTURE MODE, then press OK. Change to EXPERT1, press OK. Then change each value to the following...

Contrast ........91
Brightness .....51
H Sharpness....56
V Sharpness....56
Colour............58
Tint ..............R11

Then press OK on EXPERT CONTROL and set the following...

Dynamic Contrast.....Off
Noise Reduction.......Off
Gamma...................Medium
Black Level..............Low
Film Mode................(Off)
Colour Standard........HD
Colour Gamut...........Wide
Edge Enhance...........Off

White Balance...Medium
Pattern.............Outer
Red Gain 2
Green Gain 0
Blue Gain -2
Red Offset 2
Green Offset 1
Blue Offset 3

Colour Management System

Red Colour -1
Red Tint 2
Green Colour 2
Green Tint -1
Blue Colour 1
Blue Tint 0
Yellow Colour 2
Yellow Tint 2
Cyan Colour 0
Cyan Tint 0
Magenta Colour -2
Magenta Tint 2

Then CLOSE, and press MENU to exit the menu.
I also switch off the Energy Saving (top left button on the remote)

Seem to look ok on my set. Not great.

Grover
 
You must log in or register to reply here.
Back
Top