Please help,Freezing every few second,Tried 10 different servers no use

xreal

Newbie
After spending hours flashing woosh build again and trying every possible setting,
I am really fed up

I am using wooshbuild 4 on my h.2s
I am using a replace.list with mgcamd 1.38r1
I am using 3 clines from 1 provider

Now the problem is the picture freezes every few seconds,
It is crazy!

I have tried my 8 mbps broadband and my 4G connection with around 20 mbps down and 8 mbps up

But still on luck

My config is as follow

Code:
# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 02 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32    cccamd netclient, card list saved as /tmp/cccamd.info 
#        (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 01 } 5 30

# network ecm timeout in seconds
K: { 1.5 }

# newcamd dead routes connect retry, sec
Q: { 1 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 86400 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

I have tried a lot of different combinations bit still no luck

Please help me :(
 
Still freezes even when I use CCcam

Also I don't think I can use replace.list in cccam so half the channels won't work
 
Last edited:
Just be careful how you answer the next question (we are on an open forum) where did you get the 3 c lines from?
Have you tried test lines from this site?
Did the same provider supply all 3 and ask you to enter all 3 into the receiver?
PM if it's easier to answer.
 
I got it from a website which I won't like to disclose,
Also I tried all those different website which give you a 24h test line
Yes
 
I know exactly where there from, forget it mate, there no good.
Try a few test lines from this site, you will see a massive difference.
I've played around with the c lines you have tried on several occasions and the only way to get them to work is by putting them into Oscam which will work fine until the close off 2 servers for maintenance. I've been there and done it many times, I've just give up with it only days ago after getting it running great then finding out there all sharing the same server. Mega cheap that's probably drawn you in but in the long run you get what you pay for. Hop this helps [emoji6]
 
I will try a line from here,
Now it seems like all those channels that require the replace.list hang and others work fine

Is it possible?
 
My advice is to leave it well alone, you won't get it working, is just not stable enough.
If others on here know what I'm talking about they will confirm.
Spend a little more and enjoy watching TV [emoji6]
 
Back
Top