signal issues

[ozshea]

hi there, i have a skybox m3 and i have dishes at 13 and 28, the 2 of them are wired into a diseqc switch now all of a sudden the signal is virtualy gone on 28, the only channel i can watch is ITV1HD, the snr on this channel is around 70% but when i change channels the snr drops to between 5 and 10%, i no its not an issue with the dish because i have a 4way lnb with feeds going to other rooms and all them are working fine with no signal issues, any ideas much appreciated.

 

[satabr]

try change your box cabel port from dish lnb and check if problem still exist then try change Desiq swith port at box becauz as you said you using 2 satellites on one box.

 

[bellend]

a wee tip just use 28e on the box if u want to use two upgrade to a blade bm7000s.