Starview HD Combo Help
- Thread starter Militaru
- Start date
the answer is in the first post of this thread :here: http://www.techkings.org/starview/6783-starview-hd-combo-firmware-flashing-guide.html it is the first thread in the starview section
hi,
iv just managed to do it myself after a day and a half of trial and error with different firmware,ways of updating ect(this was may 1st time though )
you need to download the carling combo(and extract the update file to your usb) you also need the groovrider_hd_combo_+128.uad file to ur usb.
you need to
1. load the groovrider file to your box
2. then do afactory reset
3. then go to accesory and press 8989
4.then go to key edit and check all is on
5. now do full scan
6. make sure all channels appear on the txt
7. no load on the carling file
8. connect your lan to the router
9. go to accesory and check that all the fields are filled in(you shouldnt ave changed these previosly)
10. set ip to auto
11. now go to cs net and select ustream(uk) istream(irl)
12. now go to register
(if the cs net has not appeared,you will need to go back to the accesory menu and press 8989 to turn the key edit on)
good luck.
let me tell you i could really ave done with astep by step guide like this because i nearly had to buy a new front window due to a starview shaped hole that nearly appeard in it!!!!!
iv just managed to do it myself after a day and a half of trial and error with different firmware,ways of updating ect(this was may 1st time though )
you need to download the carling combo(and extract the update file to your usb) you also need the groovrider_hd_combo_+128.uad file to ur usb.
you need to
1. load the groovrider file to your box
2. then do afactory reset
3. then go to accesory and press 8989
4.then go to key edit and check all is on
5. now do full scan
6. make sure all channels appear on the txt
7. no load on the carling file
8. connect your lan to the router
9. go to accesory and check that all the fields are filled in(you shouldnt ave changed these previosly)
10. set ip to auto
11. now go to cs net and select ustream(uk) istream(irl)
12. now go to register
(if the cs net has not appeared,you will need to go back to the accesory menu and press 8989 to turn the key edit on)
good luck.
let me tell you i could really ave done with astep by step guide like this because i nearly had to buy a new front window due to a starview shaped hole that nearly appeard in it!!!!!
See wheelo link and the other posts above yours they give you the info you need
Similar threads
