What's new
By:

Starview HD Combo+ with Lan

S

sirnet

Newbie
I bought starview HD Combo Plus with lan

Update firmware (following the guideline) with Carling+_0712.USD, channel scaned correctly.

Now the problem is some channel take a pause for few second and then start again or some time can see message of scrabbled channel.

System Information as follow..

Model Name: carling+
Software Version: Ver F5.21,LDR: Ver 00.21
Hardware version: Ver 01.20 PTC(ok)

In my area people got new cards as well.

now first question if anybody can help me why pause for some channels and how can fixed this

Thanks
 
hiya guyz i think av got the same problem with me hd combo it freez every few seconds, any help will b appreciated
 
hi i had the same problem first check your mac address if it shows (0A:00:00:00) then goto (Starview Firmware Links) and download the (SVHD+ LAN FIX mac and firmware upgrade issues)
 
starview hd combo

hi there I cant get my combo to connect to the server iv just read something about the mac address mine is 0A:00:00:00:00:00 can I change it without using a null cable thanks
 
hi i have the starview hd combo with lan got the cable side working got the carling -1.oo firmware but recently lost some channels LFC espn few others do i need to change firmware or is there a fix any help would be greatful
 
@ chad123
THIS IS FOR THE STARVIEW HD COMBO + ONLY IF YOURS DOES NOT HAVE A LAN PORT DO NOT USE THIS FIX!!!!!


You will need:

A computer with a serial port

A Null modem 9 pin serial cable (as used on the starview 1 - 3)

Connect the SV HD to the computer using the serial cable and attach to mains (leave turned off by switch on back)

UNZIP the file downloaded

open HD-200_Download.exe

Choose COM 1 (unless you have connected it to a different port)

Select software (HD300N_SC_RS232_1.bin)

Turn on receiver with rear switch

bar will start counting to 100%

WAIT UNTIL SOFTWARE SAYS COMPLETE!!!!

Turn off receiver and back on

P.S. This will also recover 'bricked' SVHD's (if there are any lights still on)

Once complete the receiver will be as factory provided.

If your Starview HD has lost its MAC address this is what you need to do next:

Go to accessory - network - ip config

Set IP to manual

You can now edit the MAC address back to the original receivers address - Your mac address is on a sticker inside the receiver (you can see it through the vents on the top)

apply then exit.
 
cccam will it work after fix

thank u for help but i just wanted to know one thing there is a cccam set up for the saterlite side will this fix mess this up . again thank you for all you help
 
You must log in or register to reply here.
Back
Top