Vix 3.2.007 - Fast N' Loud - build

thomas88

Member
Vix 3.2.007 - Fast N' Loud - VERY FAST Backup build

View attachment 14080

Build info:
VERY VERY FAST BUILD
This is just a build for watching and recording tv no thrills or spills.
No skyblue skin as it slows down the builds.
A/V setting mode 720p
Vix spinner removed and Homer spinner installed

add what plugins or skins you like....... #80)


INSTALLED ON THIS BUILD

Softcams:
MGcamd 1.38
View attachment 14081

Plugins:
Cacheflush
CrossEPG Downloader
OpenWebif
Permanent VFD Clock
View attachment 14082

Bootlogo:
Fast N' Loud
View attachment 14080

skin:
Default - Vix Night-HD
View attachment 14083

SPINNER
Homer
View attachment 14098


ZGEMMA DISHCABLE'S SETTUP
View attachment 14093
plug one dish cable into tuner A. and the second cable into B.
or
plug single cable in to A. turn B off.
setup,service searching,Tuner configuration,
set Tuner B: not configued.

FLASHING THE ZGEMMA

1,Download Fast n Loud build software from the link.
2, Unzip it and copy the Zgemma folder to a fat32 formatted USB Drive.
3, Plug the USB to the back panel USB port.
4, Power on,
5, Then the display shows View attachment 14084
6, power off, reboot.


ZGEMMA S2 SETTUP


ADDING A BIGGER USB DRIVE TO THE BOX FOR RECORDING
initialise your drive or AFTER FLASH (make sure zgemma folder is not on usb)
Insert usb in back
Turn on
Menu
Setup
System
Storage devices
Initialisation (select ur usb/hdd)
Initialise with red button.
View attachment 14085

Now Check
Menu
Setup
Vix
Mount manager (make sure mount is to hdd and format ext4)
View attachment 14092

SWAPFILE SETUP
Menu
Setup
Vix
Swap manager
Make sure its created, enable at startup and active- or see setup thread.
everything else should be set to correct paths after reboot.
View attachment 14086

SCANNING CHANNELS
Menu
setup
service searching
autobouquets maker
providers. Change skyuk;area to your area.
save
delete bouquets
start scan
reboot
View attachment 14087

FXP N-LINE
flashfxp setup on your pc
zgemma connected to router
we are using MGcamd 1.38, you will need to add your new N.line in the newcamd.list
ok lets get the box ip, menu,setup,system,network,FTPsetup(running)good.. now device setup, adapter settings.
here you can see the ip address. (my one is 192.168.1.93)and user interface is yes and use DHCP yes. network test all good.
so run fxp client connect, add ip, user:root password,root port,21

EDIT AND SAVE FILE
go to /usr/keys/
right click on the newcamd.list and edit.
so it looks like this.
CWS = servicesat.syt.net 14030 gam0007 SatTO 01 02 03 04 05 06 07 08 09 10 11 12 13 14
save logout.
View attachment 14088

START SOFTCAM
View attachment 14081
menu
setup
softcam /CI
softcam manager
start/restart
exit

PICONS
View attachment 14099
add the picon folder to your HDD


SCREENS
View attachment 14089
View attachment 14090
View attachment 14091

DOWNLOADS
Link: http://www.megafileupload.com/qdrR/Vix_3.2.007_-_Fast_N__Loud_-_build.rar
RAR Password:qwerty

build by Thomas88

if you test this build plz's give feedback on build performance.
 
Last edited:
Can i ask how you managed to get 512MB swap file.......i have installed it (not your backup) but it only has 256MB max swap size?
 
Can i ask how you managed to get 512MB swap file.......i have installed it (not your backup) but it only has 256MB max swap size?

this build was just thrown together as i was having problems with the last build. did not reformat my usb harddrive but just used the last setup swap file.
 
Last edited:
BUILD UPDATE
after a chat to gmangt4 about a few setting tweaks
&
Vix spinner removed and Homer spinner installed
 
Have you got a link to that homer spinner been looking around and found minion one that bobs up and down Screenshot_2015-10-02-16-02-46.jpg
I haven't tried it yet but going to have a go later
 
thanks couldn't get the minion one working correctly chatting to the person that uploaded the file but did find this one witch did wait4.png i will have a look at yours
 
tested Kiddac's Blue HD 2 skin on this build and its working with this skin file
 
Last edited:
Great image - thanks,

Tried to install Dreamplex but I get the following error message - any ideas on how to resolve? I have tried to run opkg update but that did not work also

root@zgemma-star-2s:~# opkg install /tmp/enigma2-plugin-extensions-dreamplex_2.1
.3_all.ipk
Installing DreamPlex (2.1.3) on root.
Installing curl (7.43.0-r0) on root.
Downloading deleted/curl_7.43.0-r0_mips32el.ipk.
Collected errors:
* opkg_download: Failed to download deleted/feeds/openvix/release/3.2/xp1000/mips32el/curl_7.43.0-r0_mips32el.ipk, wget returned 255.
* opkg_install_pkg: Failed to download curl. Perhaps you need to run 'opkg update'?
* opkg_install_cmd: Cannot install package DreamPlex.
root@zgemma-star-2s:~#
 
Back
Top