@Willo3092 , meant to ask have added jedimaker and xtreamity folders in your backup script ?
WilloBuild WilloBuild OpenViX 6.5 Series
- Thread starter Willo3092
- Start date
oops, the ATV script is probably because it may have been grabbing the recorvery image, which it shouldn't do, I fixed this in the grogbuild setup script but not the install_atv script. Should be fixed now.
Not sure about the VIX install script, it could well require a rewrite as the vix site did change which I updated grogbuild script but can't remember if I did for the VIX install script, unfortunately won't be able to look at it for a week or so due to other commitments, ie the wife insisting on diy being finished, you know those jobs started months/years ago lol
@grog68 ,you said Should be fixed now ? did you mean grogbuild atv because just tried the openatv one and :
Code:
If using multiboot box please enter partition to flash: 2
--2021-02-18 21:50:29-- http://images.mynonpublic.com/openatv/current/zgemmah9combo/openatv-6.4-zgemmah9combo-20210218_full_recovery_emmc.zipah just noticed, the atv images filenames are different for the h9combo compared to other boxes, ie the H7 has the following images:
the H9Combo files are as follows:
Now both the grogbuild setup script and the install_atv script (as off tonight) ignores the recovery files and then uses the latest non recovery image. Normally this is the usb.zip image, on the H9combo it would be the mmc.zip file, I assume this is OK as grogbuild has worked fine but also noticed the last line has two images on the same line, wonder if a bit of bad html code is breaking my link extractor code
Code:
openatv-6.4-zgemmah7-20210217_usb.zip
openatv-6.4-zgemmah7-20210218_usb.zip
openatv-6.4-zgemmah7-20210216_recovery_emmc.zip
openatv-6.4-zgemmah7-20210217_recovery_emmc.zip
openatv-6.4-zgemmah7 -20210218_recovery_emmc.zipthe H9Combo files are as follows:
Code:
openatv-6.4-zgemmah9combo-20210217_mmc.zip
openatv-6.4-zgemmah9combo-20210218_mmc.zip
openatv-6.4-zgemmah9combo-20210215_recovery_emmc.zip
openatv-6.4-zgemmah9combo-20210217_recovery_emmc.zip
openatv-6.4-zgemmah9combo -20210218_recovery_emmc.zip
openatv-6.4-zgemmah9combo-20210215_full_recovery_emmc.zip
openatv-6.4-zgemmah9combo-20210217_full_recovery_emmc.zip openatv- 6.4- zgemmah9combo-
20210218_full_recovery_zipNow both the grogbuild setup script and the install_atv script (as off tonight) ignores the recovery files and then uses the latest non recovery image. Normally this is the usb.zip image, on the H9combo it would be the mmc.zip file, I assume this is OK as grogbuild has worked fine but also noticed the last line has two images on the same line, wonder if a bit of bad html code is breaking my link extractor code
@Willo3092 do you have any idea if the mmc files are any different to usb.zip image files?
I think they are basicly the same
Yea that's what I thought, and the script does appear to fetch the latest image, not sure why its not actually working on your box. Did you say grogbuild installs ok?
Willo3092
VIP Member
Not sure, I think they're the same.
You updated ViX for me a while ago to download the correct file. Works for me and my user anyway
but the image it is downloading for openatv only is full recovery image that would totally scrub the box I never noticed that the last time
it may not be working because it is trying to flash partition 2 but that is good thing it did not work but it would have been no trouble i have recent backup
And the Muppet of the year for 2021 is Grog68. I haven't copied the fixed script over to Dropbox doh.
I've shut computer down now so will copy to Dropbox in the morning.
Absolutely no rush mate, youve got other stuff to do.
Still no joy here is output from putty.
Code:
login as: root
root@192.168.0.14's password:
root@zgemmah9combo:~#
root@zgemmah9combo:~#
root@zgemmah9combo:~# wget --no-check-certificate -O installatv.sh https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1 && bash installatv.sh
--2021-02-19 16:18:02-- https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1
Resolving www.dropbox.com... 162.125.64.18, 2620:100:6020:18::a27d:4012
Connecting to www.dropbox.com|162.125.64.18|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: /s/dl/nqbo698rxconave/installatv.sh [following]
--2021-02-19 16:18:03-- https://www.dropbox.com/s/dl/nqbo698rxconave/installatv.sh
Reusing existing connection to www.dropbox.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com/cd/0/get/BJOVkd5JzB5mu9i_yn0Wo-n7fXqeKZXDlpz452CWHxX0W-waKj4WsP5Rd6MLr-IPtBNMasiciklM5IcRwhd4H17zUo3rsAq502mYdigkv4xTWEJQ5Fk0VF1-rKS3GVJrZrc/file?dl=1# [following]
--2021-02-19 16:18:03-- https://ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com/cd/0/get/BJOVkd5JzB5mu9i_yn0Wo-n7fXqeKZXDlpz452CWHxX0W-waKj4WsP5Rd6MLr-IPtBNMasiciklM5IcRwhd4H17zUo3rsAq502mYdigkv4xTWEJQ5Fk0VF1-rKS3GVJrZrc/file?dl=1
Resolving ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com... 162.125.64.15, 2620:100:6020:15::a27d:400f
Connecting to ucfffd85ace4b01ca9e41cfe8fdf.dl.dropboxusercontent.com|162.125.64.15|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 913 [application/binary]
Saving to: ‘installatv.sh’
installatv.sh 100%[==================================>] 913 --.-KB/s in 0s
2021-02-19 16:18:04 (38.2 MB/s) - ‘installatv.sh’ saved [913/913]
You are about to flash your zgemmah9combo box with the latest stable image of ATV
If using multiboot box please enter partition to flash: 2
--2021-02-19 16:18:10-- http://images.mynonpublic.com/openatv/current/zgemmah9combo/openatv-6.4-zgemmah9combo-20210219_mmc.zip
Resolving images.mynonpublic.com... 136.243.69.212, 176.9.45.237
Connecting to images.mynonpublic.com|136.243.69.212|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 100378556 (96M) [application/zip]
Saving to: ‘latestatv’
latestatv 100%[==================================>] 95.73M 8.48MB/s in 13s
2021-02-19 16:18:23 (7.58 MB/s) - ‘latestatv’ saved [100378556/100378556]
Archive: latestatv.zip
creating: h9combo/
inflating: h9combo/rootfs.tar.bz2
inflating: h9combo/uImage
inflating: h9combo/force_h9combo_READ.ME
inflating: h9combo/imageversion
inflating: unforce_h9combo.txt
mkdir: can't create directory '/newroot': File exists
ofgwrite Utility v4.5.6
Author: Betacentauri
Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!
Flashing rootfs
Flashing kernel
Error: Wrong multiboot partition value. Only values between 0 and 9 are allowed!
Usage: ofgwrite <parameter> <image_directory>
Options:
-k --kernel flash kernel with automatic device recognition(default)
-kmtdx --kernel=mtdx use mtdx device for kernel flashing
-kmmcblkxpx --kernel=mmcblkxpx use mmcblkxpx device for kernel flashing
-r --rootfs flash rootfs with automatic device recognition(default)
-rmtdy --rootfs=mtdy use mtdy device for rootfs flashing
-rmmcblkxpx --rootfs=mmcblkxpx use mmcblkxpx device for rootfs flashing
-mx --multi=x flash multiboot partition x (x= 1, 2, 3,...). Only supported by some boxes.
-n --nowrite show only found image and mtd partitions (no write)
-f --force force kill e2
-q --quiet show less output
-h --help show help
root@zgemmah9combo:~#I deleted newroot folder from Root and atvimage folder from hard drive and rebooted zgemma.
And tried again still the same output but no error about newroot folder. mkdir: can't create directory '/newroot': File exists
ignoring the newroot folder issue, the multiboot partition value error is the one that I would look at first, i've not got a multiboot box anymore so can't check but not sure why you are getting that error, you didn't enter a number, delete and then enter another number or anything did you?
sorry mate my fault, didn't notice this was your build main thread, although you must agree ATV is far superior