WilloBuild WilloBuild OpenViX 6.6 Series

Willo3092

VIP Member
38122

WILLOBUILD IS A CUSTOM OPENVIX BUILD


WILLOBUILD IS FLASHED DIRECTLY VIA PUTTY.
THERE IS NO NEED FOR USB FLASHING.
IT WILL ALWAYS FLASH THE LATEST IMAGE AND UPDATES CAN BE DONE VIA SOFTWARE UPDATE.
THIS SHOULD WORK ON ANY OPENVIX SUPPORTED RECEIVER.
IF YOU WOULD LIKE TO HELP ME WITH SERVER HOSTING COSTS :smiley: download.png


TO INSTALL COPY THIS CODE AND RIGHT CLICK IN PUTTY TO PASTE AND THEN PRESS ENTER.
Code:
wget --no-check-certificate -O install_vix.sh http://www.willobuild.net/files/scripts/install_vix.sh && bash install_vix.sh

FULL INSTRUCTIONS

VIX 6.6 - USE THE PUTTY SCRIPT AND DON'T RESTORE SETTINGS FROM VIX 6.4 or 6.5

Menu.jpg



Menu2.jpg



1_0_19_C441_837_2_11A0000_0_0_0_20240618192649.jpg



Grid.jpg



C-Select.jpg



Movies.jpg




UP AND RUNNING IN 3 EASY STEPS:

1) FLASH USING PUTTY
2) RESTORE SETTINGS DURING WIZARD
3) RESTORE LINE AND TIMERS




Many thanks to:
KiddaC for his amazing skins, Xstreamity and JediMakerXtream
Grog68 for his Movie Organisor plugin and flash script
Dsayers2014 for his plugins and all the ideas I've 'borrowed'
 
Last edited:
I am going to close this thread now. If you require help on this build start a new thread below these stickies.
If you issue relates to this build, use the prefix option WilloBuild when starting a new thread.


38289
 
ciao, su h2h si installa facilmente mentre su h5 completa il flash ma poi rimane su boot senza che il ricevitore si avvii
 
Works fine for me:

1613659741821.png

There are separate putty codes for each box, they are not the same.

H3 (H2H, H2S etc)

Bash:
wget --no-check-certificate -O install_h3.sh http://www.willobuild.xyz/files/Scripts/install_h3.sh && bash install_h3.sh


H5 series

Bash:
wget --no-check-certificate -O install_h5.sh http://www.willobuild.xyz/files/Scripts/install_h5.sh && bash install_h5.sh

failing that, try the PSU from the H2H on the H5.
 
scusami non sono stato chiaro prima ho provato con i codici h5 con putty ma non lo installava cosi ho usato usb e completa il flash solo che non si avvia provo un alimentatore diverso e ti faccio sapere grazie
partito con codici h5 ho cambiato immagine da egami a opentav 6.4 devo solo verificare che vada tt a buon fine
niente non va ti allego il risultato spero sia utile
 
Last edited:
@Willo3092 just tried to use your backup script
Code:
wget --no-check-certificate -O willobuild-settings.sh http://www.willobuild.net/files/Scripts/willobuild-settings.sh && bash willobuild-settings.sh

getting error:

--2021-02-18 15:13:43-- http://www.willobuild.net/files/Scripts/willobuild-settings.sh
Resolving www.willobuild.net... 141.136.33.207
Connecting to www.willobuild.net|141.136.33.207|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2021-02-18 15:13:44 ERROR 404: Not Found.

root@zgemmah9combo:~#
 
H5 series

Bash:
wget --no-check-certificate -O install_h5.sh http://www.willobuild.xyz/files/Scripts/install_h5.sh && bash install_h5.sh

I'm using my .xyz server now, not the .net one although that should still work in theory.

EDIT:

wget --no-check-certificate -O willobuild-settings.sh http://www.willobuild.net/files/Scripts/willobuild-settings.sh && bash willobuild-settings.sh

That's not even my flash script, that's one I used for just downloading the settings for a manual flash - not needed anymore since @grog68 sorted out the ViX script for me.
 
Last edited:
H5 series

Bash:
wget --no-check-certificate -O install_h5.sh http://www.willobuild.xyz/files/Scripts/install_h5.sh && bash install_h5.sh

I'm using my .xyz server now, not the .net one although that should still work in theory.

EDIT:

wget --no-check-certificate -O willobuild-settings.sh http://www.willobuild.net/files/Scripts/willobuild-settings.sh && bash willobuild-settings.sh

That's not even my flash script, that's one I used for just downloading the settings for a manual flash - not needed anymore since @grog68 sorted out the ViX script for me.
I got the script from your pdfs I downloaded , I thought it would just backup settings e.t.c

OPTION 3:

IF YOU’RE RUNNING AN IMAGE, OTHER THAN OPENVIX:

FIRST USE THIS SCRIPT TO DOWNLOAD WILLOBUILD SETTINGS AND BACKUP YOUR LINE:
 
I got the script from your pdfs I downloaded , I thought it would just backup settings e.t.c
I need to update my guides embarassed.png
There is a script built in that backs up all user files from the previous image to /media/hdd/#Backups# just in case the user hasn't backed up lines and timers etc.
 
I need to update my guides View attachment 58724
There is a script built in that backs up all user files from the previous image to /media/hdd/#Backups# just in case the user hasn't backed up lines and timers etc.
I was thinking some things may be slightly different on VIX than openatv so script would have copied settings then I could restore If just doing normal VIX installation not a build.
 
@grog68 has a script for plain ViX installation but you have to back your own settings up from ATV and extract them manually.

Flash VIX via command line from the creators GrogBuild FreeRange - Leading the way to simplicity

There is a backup/restore plugin in my build to restore timers and lines etc that were backed up on installation.
Thanks @Willo3092 , I have tried both those scripts before just to install plain VIX and OpenATV they error on my zgemma H9 combo
error as posted in picture above cannot flash kernel, because no kernel file was found.
probabley due to partitions layout not sure, yet yours and grogs build will install but iv'e got to enter reboot in putty when script has finished
 
I haven't got a H9 to test but my SF8008 only reboots when I flash the partition I'm actually using.
You just need to reboot from the multiboot selector in the start menu.
 
I haven't got a H9 to test but my SF8008 only reboots when I flash the partition I'm actually using.
You just need to reboot from the multiboot selector in the start menu.
no I don't flash first partition when trying script, I thought it would be safer just doing reboot in putty. did not know you could access multiboot menu in sart menu because screen still displays flash screen but it has finished the flash do you just use exit button.

I'm not talking this is happening just now but last time I tried installing builds.
 
did not know you could access multiboot menu in sart menu because screen still displays flash screen but it has finished the flash do you just use exit button.

Which screen, Putty or the box? Putty usually says going for reboot now but doesn't unless you've actually flashed the partition you are usually using. No problem rebooting via Putty anyway.
 
Which screen, Putty or the box? Putty usually says going for reboot now but doesn't unless you've actually flashed the partition you are usually using. No problem rebooting via Putty anyway.
perhaps thats what it is been a while iv'e probably booted into partition I have wanted to flash because I would not risk it on first partition. I will try tommorrow and let you know.
 
Back
Top