What's new
By:
Filters

WooshBuild Wooshbuild

pabloescaban said:
On new flashed atv, the softcam isn't recognised server side so it shows as unknown 91c0
if older builds are used it says mgcamd 6d67
Nothing to worry about
Click to expand...

Yeah but I can't see what channels the box is watching like I can on all my other boxes that are running cccam 2.3.0 / 2.3.2. The new ATV Cccam feed only works on the Zgemma H9 boxes, I wish someone would provide a solution to have a c line running on all the other Zgemma boxes that are flashed with the new Open ATV Build.
 
Abu Baniaz said:
What is the exact error you are getting?
Click to expand...
CCcam lines don't work using the newer atv builds on older boxes.
Anything before a H5.3tc cannot use CCcam as it's not recognised by the softcam, only ARM boxes and even then it's hit and miss, mostly miss.
There is no error message, 'softcam setup' says the same thing, 'restarting softcam 4 - 3 - 2 - 1'
nothing
no possibility of it working with a brand new line that is less than a few minutes old or even a seasoned 6 month old line that worked ok before.
This must have been reported before?
Even changing softcams to older versions makes no difference.
Putting the same C line in oscam works but oscam doesn't work too good on older boxes for some reason which leaves an entire swathe of users without a working line/softcam/setup
 
adamsm said:
Box is connecting via mgcamd and channels are clearing however on my oscam server it's saying newcamd (unknown please report) therefore it won't show me what channels the box is watching.
Click to expand...
So why not add the details to oscam.srvid2?
They are available on
Code: 
https://kos.hdsat.pl/menu-20.html#services
 

Attachments

  • oscam services.png
    oscam services.png
    27.9 KB · Views: 11
Last edited:
pabloescaban said:
CCcam lines don't work using the newer atv builds on older boxes.
Anything before a H5.3tc cannot use CCcam as it's not recognised by the softcam, only ARM boxes and even then it's hit and miss, mostly miss.
There is no error message, 'softcam setup' says the same thing, 'restarting softcam 4 - 3 - 2 - 1'
nothing
no possibility of it working with a brand new line that is less than a few minutes old or even a seasoned 6 month old line that worked ok before.
This must have been reported before?
Even changing softcams to older versions makes no difference.
Putting the same C line in oscam works but oscam doesn't work too good on older boxes for some reason which leaves an entire swathe of users without a working line/softcam/setup
Click to expand...

Nobody has reported issues properly.

One of the ATV developers has tested on sogno8800hd, it had high cpu usage unless boxtype is to: boxtype = sogno
oscam smod detects this automatically


On my Technomate Nano SE M2, cpu usage for oscam is 0.8 percent.


PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2976 root 20 0 173552 87584 12360 S 1.6 27.8 1:58.38 enigma2
4053 root 20 0 15860 5556 2272 S 0.8 1.8 0:02.78 oscam-stable


Further to my other post, I have a TM Nano OE, a 400 MHz receiver, pretty sure it is single core, I will try on that sometime later in the week.
 
Abu Baniaz said:
So why not add the details to oscam.srvid2?
They are available on
Code: 
https://kos.hdsat.pl/menu-20.html#services
Click to expand...

Ive alread done this and shows channels ok with my other connections that are using ccccam. I beleive the new version of Mgcamd with new softcam download feed isn't on the latest version of Oscam which is causing the error.
 
You are mixing terms up. Forget the "feeds" at the moment and also forget the softcam control methods.

Which of the following statements are you wanting to express. (please ignore capitalisation errors)

1. mgcamd emulator using newcamd protocol does not show channel being viewed
2. mgcamd emulator using cccam protocol does not show channel being viewed

3. cccam emulator using newcamd protocol does not show channel being viewed
4. cccam emulator using cccam protocol does not show channel being viewed

5. oscam emulator (not emu edition) using newcamd protocol does not show channel being viewed
6. oscam emulator (not emu edition) using cccam protocol does not show channel being viewed

7. oscam emulator (emu edition) using newcamd protocol does not show channel being viewed
8. oscam emulator (emu edition) using cccam protocol does not show channel being viewed
 
Channels viewed are now working. The srvcid2 that I dowloaded for Sly wasn't been read correctly so I just made my own.
 
adamsm said:
Ive alread done this and shows channels ok with my other connections that are using ccccam. I beleive the new version of Mgcamd with new softcam download feed isn't on the latest version of Oscam which is causing the error.
Click to expand...

Thats the old srvid format I have srvid2 on my oscam
 
pabloescaban said:
Putting the same C line in oscam works but oscam doesn't work too good on older boxes for some reason which leaves an entire swathe of users without a working line/softcam/setup
Click to expand...

On a Zgemma LC, CPU usage for Oscam is 0.6 percent. It is connected to a server using CCcam protocol


PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2460 root 19 -1 14704 5044 2000 S 0.6 4.2 0:00.55 oscam-stable

I have not blinged it with various skins and plugins. It is using out of the box skin. Not had a freeze in 10 minutes of viewing.

I installed/issued the following:
Code: 
root@zgemmaslc:~# wget -O - -q http://updates.mynonpublic.com/oea/feed | bash
opkg update
opkg install enigma2-plugin-softcams-oscam-stable
opkg install enigma2-plugin-systemplugins-autobouquetsmaker
opkg install enigma2-plugin-extensions-epgimport



Code: 
zgemmaslc login: root
root@zgemmaslc:~# wget -O - -q http://updates.mynonpublic.com/oea/feed | bash

    SoftCAM Feed Universal (secret feed) succesfully installed ...
root@zgemmaslc:~# opkg update
Downloading http://feeds2.mynonpublic.com/6.2/lc/3rdparty/Packages.gz.
Updated source 'openatv-3rdparty'.
Downloading http://feeds2.mynonpublic.com/6.2/lc/all/Packages.gz.
Updated source 'openatv-all'.
Downloading http://feeds2.mynonpublic.com/6.2/lc/lc/Packages.gz.
Updated source 'openatv-lc'.
Downloading http://feeds2.mynonpublic.com/6.2/lc/lc_3rdparty/Packages.gz.
Updated source 'openatv-lc_3rdparty'.
Downloading http://updates.mynonpublic.com/oea/4.2/mips32el/Packages.gz.
Updated source 'mips32el-3rdparty-secret-feed'.
Downloading http://feeds2.mynonpublic.com/6.2/lc/mips32el/Packages.gz.
Updated source 'openatv-mips32el'.
Downloading http://feeds2.mynonpublic.com/6.2/lc/zgemmaslc/Packages.gz.
Updated source 'openatv-zgemmaslc'.
root@zgemmaslc:~# opkg install enigma2-plugin-softcams-oscam-stable
Installing enigma2-plugin-softcams-oscam-stable (1.20+svn11518) on root.
Downloading http://updates.mynonpublic.com/oea/4.2/mips32el/enigma2-plugin-softcams-oscam-stable_1.20+svn11518-r4.0_mips32el.ipk.
Configuring enigma2-plugin-softcams-oscam-stable.
Switching default softcam to oscam-stable
Softcam is selected as default, (re)starting oscam-stable
Stopping Softcam service oscam-stable: FAILED
Starting Softcam service oscam-stable: OK
root@zgemmaslc:~# opkg install enigma2-plugin-systemplugins-autobouquetsmaker
Installing enigma2-plugin-systemplugins-autobouquetsmaker (3.1+git612+8c98b88) on root.
Downloading http://feeds2.mynonpublic.com/6.2/lc/mips32el/enigma2-plugin-systemplugins-autobouquetsmaker_3.1+git612+8c98b88-r0_mips32el.ipk.
Checking for an ABM cache file
No cache file found, continuing.
Configuring enigma2-plugin-systemplugins-autobouquetsmaker.
root@zgemmaslc:~# opkg install enigma2-plugin-extensions-epgimport
Installing liblzma5 (5.2.3) on root.
Downloading http://feeds2.mynonpublic.com/6.2/lc/mips32el/liblzma5_5.2.3-r0_mips32el.ipk.
Installing python-lzma (0.0.8) on root.
Downloading http://feeds2.mynonpublic.com/6.2/lc/mips32el/python-lzma_0.0.8-r0_mips32el.ipk.
Installing epgimport-rytec (20190610) on root.
Downloading http://feeds2.mynonpublic.com/6.2/lc/all/epgimport-rytec_20190610-r0_all.ipk.
Installing enigma2-plugin-extensions-epgimport (1.0+git211+3f64bd0) on root.
Downloading http://feeds2.mynonpublic.com/6.2/lc/mips32el/enigma2-plugin-extensions-epgimport_1.0+git211+3f64bd0-r0_mips32el.ipk.
Configuring liblzma5.
Configuring python-lzma.
Configuring epgimport-rytec.
Configuring enigma2-plugin-extensions-epgimport.
 
i'll give it a try on the next h1 or h2 box i encounter but still not sure why CCcam doesn't work
if the end user has a C line I'd have thought using CCcam would have been preferable to oscam.
Was/is the C line in the method above a Sat or Cable line?
 
The CCcam 2.32 they have on the server is patched for 19.2. It is unusable for me.

The server connnection ("line") works for cable and sat. The CAID line is commented out to allow this
 
This is what i was getting at earlier.
Cable C lines and Sat C lines using 28.2 in uk can no longer use CCcam softcam on older boxes.
Oscam is the way forward in these cases if their providers allow it.
I have not had any joy with either cable or sat C lines on older boxes trying to use CCcam since the file location changed to etc.
flashing back to atv 6.1 and putting same line in usr/keys and using 2.3.0 will work but brings up other problems with ABM
 
Surely the new cams secret feed needs to be updated to include the standard cccam 2.3.0 then this would resolve the issue everyone seems to be having with their C lines not working?
 
You must log in or register to reply here.
Back
Top