Ali3n
Newbie
Its by all means not the best, but will hopefully require very little setup from yourself and you should be up and running within 10-15 minutes or so, with a quick and glitch free image. Built on OpenATV 6.0.
Mgcamd pre installed (all you need to do is copy your newcamd.list to /usr/keys)
V-Skin Bolt skin by Kidda C
IPTV
Cache Flush
EMC
EPGRefresh
Media Player
Media Scanner
OpenWebif
Picture player
Refreshed PICONS
Flashing
1.Get yourself a USB Stick and format with HP USB Disk Storage Format Tool, format as Fat32. A quick format should be good enough. If not use HDD LLF tool, then quick format with windows on Fat32.
1a. Copy contents of rar to the root of the usb. All that should be on USB is zgemma\h3, then 4 files in the h3 folder.
2.Ensure box is turned off using the switch on the rear of the unit and plug in USB at the rear.
3.Turn switch on - You will see either FLSH which means its flashing. If it says USB press the silver power button and it will turn to FLSH and start flashing. This only takes a couple of minutes.
4.Your know its finished flashing when it boots up to a channel probably BBC One?
FTP Lines to box
Menu > information > Network > *remember your ip address* Once remembered exit all the way out.
FTP your newcamd.list or CCcam.cfg to /usr/keys. There are 2 blank ones in the image, if you prefer you can just copy and paste your lines in them and save.
Your mgcamd line should look like this;
CWS = *server* *port* *username* *password* 01 02 03 04 05 06 07 08 09 10 11 12 13 14
If you have an N: line just replace the 'N:' with 'CWS = ' (same format as above)
Softcam Setup
Menu > Info Panel > SoftcamPanel.
Select Cam 1 = mgcamd_1.38r1
Red button to stop, green button to restart. It will tell you its restarting, once completed you can now exit.
USB / HDD setup
Menu > Setup > System > Storage Devices > Initialisation > OK on your device > Red button > yes to clear device.
Once completed it will kick you off the menu so, Menu > Setup > System > Storage Devices > convert ext3 filesystem to ext4 > OK on your device > Red button > yes to convert.
Once completed will kick you off menu. All complete.
Swap File (optional)
Menu > info panel > plugins > swap manager > green button > select USB/HDD > 256mb.
It will now create a swapfile, it takes a couple of minutes. Once created Red button (activate) > yellow button (autostart). You can now exit all the way out.
Configure tuners
Menu > setup > service searching > tuner configuration > select tuner B (Cable tuner).
Change your "Network ID" to whatever your area is. Green to save. Will ask to zap back to tuner configuration, just press yes. Exit all the way out.
AutoBouquetsMaker
Menu > setup > service searching > Autobouquetsmaker > providers.
Change "- Virgin (UK): area" to your area (same as your tuner ID). Green to save. It will take you back to the previous menu.
Click on Start scan, it will now generate all your bouquets, once done exit all the way out.
EPG Setup
Menu > setup > epg > settings.
Ensure your "EPG Location" is set to your USB or HDD, if it isnt just click left or right over it and select it. Once done continue below.
Menu > setup > epg > epgrefresh > yellow button > OK refresh now. It will take you back to EPG menu and show VM Previews screen on the top right. Its now updating your EPG. It usually takes around 2-3 minutes, and once done will put you back on the previous channel you were watching. Once its clicked you back to the previous channel you can safely say its done.
Once EPGrefresh has done go Load/save/delete > save epg > yes. EPG has now been saved, you can exit all the way out.
Recording & Timeshift
Menu > setup > recordings & timeshift > recording settings.
Make sure "default movie location" is set to your hdd/usb. Green to save.
Select Timeshift settings. Make sure "timeshift location" is set to your hdd/usb. Green to save.
Exit all the way out the menus, then Menu > standby / restart > restart.
You should now have a fully working singing and dancing cable box :) Please note, red button from TV takes you directly to IPTV player also.
Click HERE for link (Hosted my Mediafire)
Mgcamd pre installed (all you need to do is copy your newcamd.list to /usr/keys)
V-Skin Bolt skin by Kidda C
IPTV
Cache Flush
EMC
EPGRefresh
Media Player
Media Scanner
OpenWebif
Picture player
Refreshed PICONS
Flashing
1.Get yourself a USB Stick and format with HP USB Disk Storage Format Tool, format as Fat32. A quick format should be good enough. If not use HDD LLF tool, then quick format with windows on Fat32.
1a. Copy contents of rar to the root of the usb. All that should be on USB is zgemma\h3, then 4 files in the h3 folder.
2.Ensure box is turned off using the switch on the rear of the unit and plug in USB at the rear.
3.Turn switch on - You will see either FLSH which means its flashing. If it says USB press the silver power button and it will turn to FLSH and start flashing. This only takes a couple of minutes.
4.Your know its finished flashing when it boots up to a channel probably BBC One?
FTP Lines to box
Menu > information > Network > *remember your ip address* Once remembered exit all the way out.
FTP your newcamd.list or CCcam.cfg to /usr/keys. There are 2 blank ones in the image, if you prefer you can just copy and paste your lines in them and save.
Your mgcamd line should look like this;
CWS = *server* *port* *username* *password* 01 02 03 04 05 06 07 08 09 10 11 12 13 14
If you have an N: line just replace the 'N:' with 'CWS = ' (same format as above)
Softcam Setup
Menu > Info Panel > SoftcamPanel.
Select Cam 1 = mgcamd_1.38r1
Red button to stop, green button to restart. It will tell you its restarting, once completed you can now exit.
USB / HDD setup
Menu > Setup > System > Storage Devices > Initialisation > OK on your device > Red button > yes to clear device.
Once completed it will kick you off the menu so, Menu > Setup > System > Storage Devices > convert ext3 filesystem to ext4 > OK on your device > Red button > yes to convert.
Once completed will kick you off menu. All complete.
Swap File (optional)
Menu > info panel > plugins > swap manager > green button > select USB/HDD > 256mb.
It will now create a swapfile, it takes a couple of minutes. Once created Red button (activate) > yellow button (autostart). You can now exit all the way out.
Configure tuners
Menu > setup > service searching > tuner configuration > select tuner B (Cable tuner).
Change your "Network ID" to whatever your area is. Green to save. Will ask to zap back to tuner configuration, just press yes. Exit all the way out.
AutoBouquetsMaker
Menu > setup > service searching > Autobouquetsmaker > providers.
Change "- Virgin (UK): area" to your area (same as your tuner ID). Green to save. It will take you back to the previous menu.
Click on Start scan, it will now generate all your bouquets, once done exit all the way out.
EPG Setup
Menu > setup > epg > settings.
Ensure your "EPG Location" is set to your USB or HDD, if it isnt just click left or right over it and select it. Once done continue below.
Menu > setup > epg > epgrefresh > yellow button > OK refresh now. It will take you back to EPG menu and show VM Previews screen on the top right. Its now updating your EPG. It usually takes around 2-3 minutes, and once done will put you back on the previous channel you were watching. Once its clicked you back to the previous channel you can safely say its done.
Once EPGrefresh has done go Load/save/delete > save epg > yes. EPG has now been saved, you can exit all the way out.
Recording & Timeshift
Menu > setup > recordings & timeshift > recording settings.
Make sure "default movie location" is set to your hdd/usb. Green to save.
Select Timeshift settings. Make sure "timeshift location" is set to your hdd/usb. Green to save.
Exit all the way out the menus, then Menu > standby / restart > restart.
You should now have a fully working singing and dancing cable box :) Please note, red button from TV takes you directly to IPTV player also.
Click HERE for link (Hosted my Mediafire)