WooshBuild zGemma H7S WILL NOT FLASH - BROKEN!

LC633

Newbie
GUYS

I earlier was requesting help with my non-fully functioning EPG however since then my box has had a total failure.

Whilst watching a recorded programme on the box, the little Sly wheel appeared as if it was reloading EPG or refreshing bouquets. Within a few seconds it flashed up with the blue screen showing the box had crashed. The error log mentioned about a play/pause button and then it got itself stuck in a permanent reboot cycle where it reaches 97% then crashes back to 50% again. Part of the log code states "No file exists /etc/enigma2/blacklist"

I've tried to reflash using a formatted usb stick but the box refuses to flash. No matter what I try, no matter how many formats I do on the USB stick etc it will not flash it at all.

The only thing I CAN do, is access the box using filezilla as it is connected via ethernet and seems to accept a connection through that even whilst crashing and cycling reboots from 50% to 97%.

Does ANYONE know how to fix this? I know the box is screwed and needs a reflash but it will not flash. Can I just delete the entire contents of the box via filezilla perhaps?
 
Update - the error log mentioned about there being no blacklist folder inside etc/enigma2 so via filezilla I forced one in there and it instantly finished booting.

How do I re-stabilise the box now? Will it be best to do a full reflash and start again, or can I do something else to prevent the same from happening? Really really had me stumped this has.
 
Have you downloaded the right open atv for your box and extracted the zgemma file and changed the noforce file to force and tried then flash with infinity or you can wreflash with grog free range which does everything for you
 
openATV Enigma2 crash log

crashdate=Wed May 22 17:22:01 2019
compiledate=Aug 1 2018
skin=skyQ/skin.xml
sourcedate=2018-07-31
branch=6.1
rev=2.8.0-18707-g387ce4d
component=Enigma2

stbmodel=h7
stbmodel=h7
kernelcmdline=brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p3 rw rootwait h7_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
nimsockets=NIM Socket 0:
imageversion=box_type=zgemmah7
imageissue=Welcome to openATV for %h


ouquet... /etc/enigma2//userbouquet.dbe38.radio
17:21:55.2158 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe38.radio
17:21:55.2159 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe39.radio
17:21:55.2159 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe39.radio
17:21:55.2160 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites_1.radio
17:21:55.2160 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.favourites_1.radio
17:21:55.2161 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe30_1.radio
17:21:55.2161 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe30_1.radio
17:21:55.2162 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe31_1.radio
17:21:55.2162 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe31_1.radio
17:21:55.2163 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe32_1.radio
17:21:55.2163 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe32_1.radio
17:21:55.2164 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe33_1.radio
17:21:55.2164 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe33_1.radio
17:21:55.2165 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe34_1.radio
17:21:55.2166 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe34_1.radio
17:21:55.2166 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe35_1.radio
17:21:55.2167 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe35_1.radio
17:21:55.2167 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe36_1.radio
17:21:55.2168 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe36_1.radio
17:21:55.2168 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe37_1.radio
17:21:55.2169 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe37_1.radio
17:21:55.2169 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe38_1.radio
17:21:55.2169 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe38_1.radio
17:21:55.2170 [ ] dvb/db.cpp:1037 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe39_1.radio
17:21:55.2170 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.dbe39_1.radio
17:21:55.2171 [ ] dvb/db.cpp:1147 loadBouquet [eDVBDB] 23 entries in Bouquet bouquets.radio
17:21:55.2171 [ ] dvb/db.cpp:1191 renumberBouquet [eDVBDB] Renumbering...
17:21:55.2300 { } mytest.py:92 useSyncUsingChanged [Time By]: Transponder
17:21:55.2301 [ ] dvb/epgcache.cpp:474 timeUpdated [eEPGCache] time updated.. but cache file not set yet.. dont start epg!!
17:21:56.7060 { } Components/StackTrace.py:16 __init__ initializing StackTracePrinter
17:21:56.7086 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
17:21:56.7092 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
17:21:56.7095 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
17:21:56.7098 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
17:21:56.7100 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
17:21:56.7103 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
17:21:56.7105 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
17:21:56.7107 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
17:21:56.7156 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/enigma2/skyQ/fonts/SkyMedium.ttf...OK (Regular)
17:21:56.7159 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/enigma2/skyQ/fonts/SkyBold.ttf...OK (Bold)
17:21:56.7161 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
17:21:56.7163 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
17:21:56.7361 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf...OK (Subs)
17:21:56.7367 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-Italic.ttf...OK (Subsi)
17:21:56.7370 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf...OK (Subsb)
17:21:56.7372 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf...OK (Subsz)
17:21:56.7706 { W } Components/InputDevice.py:64 getInputDeviceType Unknown device type: RC for hdmi_cec
17:21:56.7745 { W } Components/InputDevice.py:64 getInputDeviceType Unknown device type: front panel
17:21:56.7945 { W } Components/InputDevice.py:64 getInputDeviceType Unknown device type: front panel
17:21:56.7948 { E } Components/InputDevice.py:47 getInputDevices [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
17:21:56.8149 { } Components/AVSwitch.py:379 setAspect [AVSwitch] setting aspect: 16:9
17:21:56.8153 { } Components/AVSwitch.py:393 setWss [AVSwitch] setting wss: auto
17:21:56.8155 { } Components/AVSwitch.py:399 setPolicy43 [AVSwitch] setting policy: panscan
17:21:56.8158 { } Components/AVSwitch.py:416 setPolicy169 [AVSwitch] setting policy2: letterbox
17:21:56.8168 { E } Components/AVSwitch.py:157 readPreferredModes [AVSwitch] reading edid modes failed, using all modes
17:21:56.8170 { } Components/AVSwitch.py:163 readPreferredModes [AVSwitch] reading _preferred modes: ['1080p', '1080p50', '720p', '720p50', '1080i', '1080i50', '480p', '576p', '1080p24', '1080p25', '1080p30', '']
17:21:56.9233 [ ] dvb/volume.cpp:161 setVolume [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
17:21:56.9250 { } Components/AVSwitch.py:1172 setScaler_sharpness [AVSwitch] setting scaler_sharpness to: 0000000D
17:21:56.9254 { } Components/AVSwitch.py:207 setMode [AVSwitch] setMode - port: HDMI, mode: 1080p, rate: 50Hz
17:21:56.9640 [ ] components/tuxtxtapp.cpp:116 setEnableTtCachingOnOff [eTuxttxtApp] enable caching
17:21:56.9698 { } Components/EpgLoadSave.py:29 start [EPGC Loads] Poller enabled.
17:21:56.9701 { } Components/EpgLoadSave.py:68 start [EPGC Save] Poller enabled.
17:21:56.9856 [ ] dvb/epgcache.cpp:446 setCacheFile [eEPGCache] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
17:21:57.0091 { } Components/StackTrace.py:54 deactivate deactivating StackTracePrinter
17:21:57.1883 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
17:21:57.2144 { } Components/Lcd.py:194 setMode setLCDMode 1
17:21:57.2149 { } Components/Lcd.py:230 setPower setLCDPower 1
17:21:57.2158 { } Components/Lcd.py:242 setShowoutputresolution setLCDShowoutputresolution 1
17:21:57.2198 { } Screens/UserInterfacePositioner.py:66 InitOsd Setting OSD position: 15 691 14 550
17:21:57.2200 { } Screens/UserInterfacePositioner.py:70 setOSDAlpha Setting OSD alpha: 255
17:21:57.2203 { } Screens/UserInterfacePositioner.py:80 set3DMode Setting 3D mode: auto
17:21:57.2208 { } Screens/UserInterfacePositioner.py:102 set3DZnorm Setting 3D depth: 50
17:21:57.2304 { } Components/EpgLoadSave.py:68 start [EPGC Save] Poller enabled.
17:21:57.2306 { } Components/EpgLoadSave.py:29 start [EPGC Loads] Poller enabled.
17:21:57.2341 [ W ] dvb_ci/dvbci.cpp:546 getSlot [CI] FIXME: request for unknown slot
17:21:57.2346 [ W ] dvb_ci/dvbci.cpp:546 getSlot [CI] FIXME: request for unknown slot
17:21:57.2350 [ W ] dvb_ci/dvbci.cpp:546 getSlot [CI] FIXME: request for unknown slot
17:21:57.2956 [ ] ../../../git/src/serviceapp/serviceapp.cpp:1624 serviceapp_set_setting [serviceapp_set_setting] setting serviceexteplayer3 options
17:21:57.2957 [ ] ../../../git/src/serviceapp/serviceapp.cpp:1628 serviceapp_set_setting [serviceapp_set_setting] setting servicegstplayer options
17:21:57.2958 [ ] ../../../git/src/serviceapp/serviceapp.cpp:1632 serviceapp_set_setting [serviceapp_set_setting] setting servicemp3 options
17:21:57.2959 [ ] ../../../git/src/serviceapp/serviceapp.cpp:1515 gstplayer_set_setting [gstplayer_set_setting] setting servicegstplayer options
17:21:57.2960 [ ] ../../../git/src/serviceapp/serviceapp.cpp:1519 gstplayer_set_setting [gstplayer_set_setting] setting servicemp3 options
17:21:57.2961 [ ] ../../../git/src/serviceapp/serviceapp.cpp:1575 exteplayer3_set_setting [exteplayer3_set_setting] setting serviceextplayer3 options
17:21:57.2962 [ ] ../../../git/src/serviceapp/serviceapp.cpp:1579 exteplayer3_set_setting [exteplayer3_set_setting] setting servicemp3 options
17:21:57.3192 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:22 setContrast --> setting contrast to: 00008000
17:21:57.3197 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:41 setSaturation --> setting saturation to: 00008000
17:21:57.3200 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:60 setHue --> setting hue to: 00008000
17:21:57.3204 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:79 setBrightness --> setting brightness to: 00008000
17:21:57.3208 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:97 setBlock_noise_reduction --> setting block_noise_reduction to: 00000000
17:21:57.3211 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:116 setMosquito_noise_reduction --> setting mosquito_noise_reduction to: 00000000
17:21:57.3250 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:135 setDigital_contour_removal --> setting digital_contour_removal to: 00000000
17:21:57.3257 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:153 setSplitMode --> setting splitmode to: off
17:21:57.3448 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:176 setSharpness --> setting sharpness to: 00000000
17:21:57.3451 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:198 setAutoflesh --> setting auto_flesh to: 00000000
17:21:57.3454 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:217 setGreenboost --> setting green_boost to: 00000000
17:21:57.3457 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:236 setBlueboost --> setting blue_boost to: 00000000
17:21:57.3460 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:255 setDynamic_contrast --> setting dynamic_contrast to: 00000000
17:21:57.3467 { } Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:358 setConfiguredValues --> applying pep values
17:21:57.4541 { } Components/Ipkg.py:28 opkgAddDestination [Ipkg] Added to OPKG destinations: /media/hdd
17:21:57.4543 { } Components/Ipkg.py:28 opkgAddDestination [Ipkg] Added to OPKG destinations: /
17:21:57.9702 { } plugin/controllers/defaults.py:78 getPiconPath Current Picon Path : /media/hdd/picon/
17:21:58.1830 { E } Tools/StbHardware.py:24 getFPVersion getFPVersion failed!
17:21:58.1841 { } plugin/controllers/models/info.py:348 getInfo [OpenWebif] -D- tuner '0' 'Si2169D' 'Tuner A'
17:21:58.1846 { } plugin/controllers/models/info.py:348 getInfo [OpenWebif] -D- tuner '1' 'Si2169D' 'Tuner B'
17:21:58.1848 { } plugin/controllers/models/info.py:348 getInfo [OpenWebif] -D- tuner '2' 'Si2168' 'Tuner C'
17:21:58.1944 { E } Components/PluginComponent.py:56 readPluginList Plugin Extensions/WebInterface failed to load: No module named plugin
17:21:58.9334 { E } Components/AVSwitch.py:157 readPreferredModes [AVSwitch] reading edid modes failed, using all modes
17:21:58.9338 { } Components/AVSwitch.py:163 readPreferredModes [AVSwitch] reading _preferred modes: ['1080p', '1080p50', '720p', '720p50', '1080i', '1080i50', '480p', '576p', '1080p24', '1080p25', '1080p30', '']
17:21:58.9736 { } Plugins/Extensions/CacheFlush/__init__.py:15 _ [CacheFlush] fallback to default translation for plugins
17:21:58.9745 { } Plugins/Extensions/CacheFlush/__init__.py:15 _ [CacheFlush] fallback to default translation for menu-system
17:21:58.9753 { } Plugins/Extensions/CacheFlush/__init__.py:15 _ [CacheFlush] fallback to default translation for extensions
17:21:58.9769 { } Plugins/Extensions/CacheFlush/__init__.py:15 _ [CacheFlush] fallback to default translation for event info
17:21:58.9779 { } Plugins/Extensions/CacheFlush/__init__.py:15 _ [CacheFlush] fallback to default translation for Automatic cache flushing
17:21:59.5011 { E } Plugins/Extensions/ChabsSkins/skyQSelector.py:48 <module> Cannot download skyQ ver
17:21:59.5762 { E } Plugins/Extensions/ChabsSkins/skyNEWSelector.py:48 <module> Cannot download skyNEW ver
17:21:59.5950 { E } Plugins/Extensions/XCplugin/plugin.py:213 <module> No module named servicewebts
17:21:59.5951 { E } Plugins/Extensions/XCplugin/plugin.py:214 <module> ERROR servicewebts
17:21:59.7207 { } Plugins/Extensions/Infopanel/plugin.py:173 <module> [Info-Panel] machinebrand: Zgemma
17:21:59.7208 { } Plugins/Extensions/Infopanel/plugin.py:174 <module> [Info-Panel] machinename: H7
17:21:59.7209 { } Plugins/Extensions/Infopanel/plugin.py:175 <module> [Info-Panel] oem name: airdigital
17:21:59.7209 { } Plugins/Extensions/Infopanel/plugin.py:176 <module> [Info-Panel] boxtype: zgemmah7
17:21:59.7425 { } Plugins/Extensions/AutoBouquets/__init__.py:12 localeInit [AutoBouquets] set language to en
17:21:59.7630 [ ] gdi/epng.cpp:24 loadPNG [ePNG] couldn't open /usr/share/enigma2/skin_default/expandable.png
17:21:59.7632 [ ] gdi/epng.cpp:24 loadPNG [ePNG] couldn't open /usr/share/enigma2/skin_default/expanded.png
17:21:59.7919 { } Plugins/SystemPlugins/CommonInterfaceAssignment/plugin.py:630 autostart [CI_Assignment] activating ci configs:
17:21:59.7954 { } XE-DIST/log.py:17 write [XE] autostart (0) occured at 1558542119.8
17:21:59.7959 { } XE-DIST/log.py:17 write [XE] WakeUpTime now set to 1558619031 (now=1558542119)
17:21:59.7960 { } XE-DIST/log.py:17 write [XE] onBootStartCheck
17:21:59.7962 { } XE-DIST/log.py:17 write [XE] WakeUpTime now set to 1558619031 (now=1558542119)
17:21:59.7963 { } XE-DIST/log.py:17 write [XE] now=1558542119 wake=1558619031 wake-now=76912
17:21:59.7964 { } XE-DIST/log.py:17 write [XE] starting import because auto-run on boot is enabled
17:22:00.2861 { } XE-DIST/log.py:17 write [XE] WakeUpTime now set to 1558619031 (now=1558542120)
17:22:00.4861 { } <string>:530 importData [XE] Download from https://xtream-editor.com/en/load/e2iptv
17:22:01.5768 { } mytest.py:865 <module> EXCEPTION IN PYTHON STARTUP CODE:
17:22:01.5769 { } mytest.py:866 <module> ------------------------------------------------------------
17:22:01.5770 { D } Traceback (most recent call last):
17:22:01.5771 { D } File "/usr/lib/enigma2/python/mytest.py", line 859, in <module>
17:22:01.5780 { D } runScreenTest()
17:22:01.5781 { D } File "/usr/lib/enigma2/python/mytest.py", line 537, in runScreenTest
17:22:01.5782 { D } plugins.readPluginList(resolveFilename(SCOPE_PLUGINS))
17:22:01.5782 { D } File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 104, in readPluginList
17:22:01.5784 { D } File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 30, in addPlugin
17:22:01.5785 { D } File "<string>", line 1294, in autostart
17:22:01.5786 { D } File "<string>", line 1271, in onBootStartCheck
17:22:01.5786 { D } File "<string>", line 1195, in runImport
17:22:01.5787 { D } File "<string>", line 569, in importData
17:22:01.5788 { D } IOError: [Errno 2] No such file or directory: '/etc/enigma2/blacklist'
17:22:01.5789 { } mytest.py:868 <module> [mytest.py] quitMainloop #4
17:22:01.5791 { } mytest.py:870 <module> ------------------------------------------------------------
17:22:01.5805 [ ] enigma.cpp:388 main [MAIN] (exit code 5)


dmesg
 
Last edited by a moderator:
Have you downloaded the right open atv for your box and extracted the zgemma file and changed the noforce file to force and tried then flash with infinity or you can wreflash with grog free range which does everything for you
Hi yes, I went via the WB instructions, selected for the zGemma H7S boxes and downloaded that zip file. I changed the noforce to force. it just would not flash when stuck inside that crash loop
 
If the box is now booting you can flash it online
blue button > flash online/local > green (online)

To flash the box by usb
Under the flap at the front (where the usb goes) is a little black button.
Turn the box off using the white button at the back
Turn back on and press in the little black button at the same time and it should then flash
 
GUYS

I earlier was requesting help with my non-fully functioning EPG however since then my box has had a total failure.

Whilst watching a recorded programme on the box, the little Sly wheel appeared as if it was reloading EPG or refreshing bouquets. Within a few seconds it flashed up with the blue screen showing the box had crashed. The error log mentioned about a play/pause button and then it got itself stuck in a permanent reboot cycle where it reaches 97% then crashes back to 50% again. Part of the log code states "No file exists /etc/enigma2/blacklist"

I've tried to reflash using a formatted usb stick but the box refuses to flash. No matter what I try, no matter how many formats I do on the USB stick etc it will not flash it at all.

The only thing I CAN do, is access the box using filezilla as it is connected via ethernet and seems to accept a connection through that even whilst crashing and cycling reboots from 50% to 97%.

Does ANYONE know how to fix this? I know the box is screwed and needs a reflash but it will not flash. Can I just delete the entire contents of the box via filezilla perhaps?
I doubt very much bootloader needs flashed. I have seen this issue many times.
I really do recommend not flashing pre-builds. I suggest fresh flash with OpenATV 6.2 as of now. As outlined you have removed the “no” from “noforce”. Please remove any other HDD/USB drives from enigma then format drive with:
Code:
https://www.portablefreeware.com/index.php?id=2909
Drive must be FAT32
Any other format or any other files on drive may cause issue on flash.

Do NOT format drive on windows, use bootice.
Only have one port reading drive on boot.
That drive should be formatted on bootice then force flash in file.
(one port)
 
Last edited:
Have you downloaded the right open atv for your box and extracted the zgemma file and changed the noforce file to force and tried then flash with infinity or you can wreflash with grog free range which does everything for you
openATV Nightly Downloads

you dont need to change noforce to force

format stick to fat32 system
just extract zgemma folder to usb
stick it in the back usb port
hold button under flap at the front of you reciever
power on box " white button on the back"
 
Try another firmware. Some times they just need a kick
So flash something different then once done flash what you want
 
Back
Top