What's new
By:
Filters

Zgemma H9.2H Flashing

M

mike larkman

Newbie
hi any 1 point me in the right direction 2 flashing this box with open atv 6.2 { CURRENT VERSION IS CORRUPT } Ive tried different usb Kingston/sandisk holding reset in on back, but box wont flash and just boots as normal. Anybody got an idiots guide on this 4 me. Cheers
 
Have you formatted the usb stick to fat32 make sure you have the right open atv image for your box or you can go do down to all builds look at grog free range build as that reflashes and installs the image for you just by entering a command into putty
 
openATV Nightly Downloads

Flashing the Receiver.
1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver
3) Insert the USB stick containing the image files into one of the REAR USB ports on the receiver
4) Power the receiver on whilst holding down the REAR RESET BUTTON
5) Once the front Air Digital display logo start is now being flashed.
6) If successful the receiver will reboot it self after the flashing process has completed.
7) Remove USB stick that contains the images files.
 
biff2005 said:
openATV Nightly Downloads

Flashing the Receiver.
1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver
3) Insert the USB stick containing the image files into one of the REAR USB ports on the receiver
4) Power the receiver on whilst holding down the REAR RESET BUTTON
5) Once the front Air Digital display logo start is now being flashed.
6) If successful the receiver will reboot it self after the flashing process has completed.
7) Remove USB stick that contains the images files.
Click to expand...
di i extract straight onto usb or do i create a folder to extract to
 
You must log in or register to reply here.
Back
Top