FreeUK
Member
Low signal is totally different from problems with a server and the H1 does not have a crap tuner if you search on the forums most posts are about the H2 and its not too clever tuner.
What signal readings are you getting SNR and on what frequency
What ive read is the tuner is weak compared to other boxes.The VM signal is 98% on most channels,but on the ones that dont clear it is 0%. Freq is 739 mhz 6952000 731 6952000 747mhz 6952000 all HD.
If your getting 0% SNR then its not a server problem its a problem with your Signal coming into the property, for arguments sake if the tuner was crap you would have problems on all VM channels and not just the ones in the high frequency range.
Your first course of action is to remove everything on the main line coming in including any Attenuators and splitters and just run the Zgemma H1 direct from the wall feed and then try those channels again that are giving you 0% SNR
Obviously you wont have a picture but if you press the OK button you should be able to see what the signal is, If it still says Zero then you either have a Box problem,Cable problem if you get any sort of signal above 0% SNR then you know you have a weak signal and will need some form of amplification to remedy the problem