What's new
By:
Filters

zgemma h2s help please

C

christc

Newbie
Hi,

Newbie here. Located in Ireland, purchased h2s with preloaded cline. Great box but not working to my liking. I have a number of items i seek clarification with. Channels are tuned, some operate flawlessly and others delay (10 sec) tuning and frequently freeze, some channels just don't tune. So I have a sat which i know is operational, I have a SINGLE feed into tuner A. I'm not bothered if the second sat feed is only required to allow second channel recording. Does this single feed cause any of the above problems. Sky Movies tune in and operate perfectly!! Some of the sports channels not so perfectly. I'm confused as to why this is, any suggestions?

H2s
Sky satellite
Single feed to Tuner A, no other connections other that power and hdmi
Signal finder stats, SNR 96%, AGC 81%, BER 0, Lock (green checked). Satellite 28.2 Astra...

I currently cannot get hold of the seller and don't have any cline code details (were not given to me).

As I said newbie to Sat boxes. Help appreciated.

Chris.
 
For starters you'll need to change the tuner setup to single feed or the box will keep trying to use both tuners and cause problems like you have mentioned.
 
Not sure what build you are using so here are instructions to disable tuner B on the box for openATV based builds, I am sure openVIX etc are similar. Press the blue button on the remote and scroll down to Tuner Setup, move to the right and with Tuner configuration highlighted press OK. Highlight Tuner B and press OK and on the next screen with Configuration mode highlighted press the left button on your remote until 'not configured' is showing and then press the Green button to save.
 
asmad said:
For starters you'll need to change the tuner setup to single feed or the box will keep trying to use both tuners and cause problems like you have mentioned.
Click to expand...

Thanks,

Could you tell me how this is done and I assume it will not effect the cline installed.


Regards,

Chris

---------- Post Merged at 08:38 PM ----------

grog68 said:
Not sure what build you are using so here are instructions to disable tuner B on the box for openATV based builds, I am sure openVIX etc are similar. Press the blue button on the remote and scroll down to Tuner Setup, move to the right and with Tuner configuration highlighted press OK. Highlight Tuner B and press OK and on the next screen with Configuration mode highlighted press the left button on your remote until 'not configured' is showing and then press the Green button to save.
Click to expand...

Can you tell me, will this affect the installed cline??

thanks,

Chris
 
No, all this effects is the tuner being used, if you only have one cable coming from your dish into Tuner A then you need to disable tuner B. It will not effect your line
 
Any Help with h2.s

Moofmilker said:
Could be a cheap line. Did you buy from eBay?
Click to expand...

Thanks,

I bought the box with the lines already installed. At this stage I'm desperate. It's so annoying looking trying to watch. Why is it all the movie channels are perfect but the sports channels are crap?

I would like to just do a factory reset. I don't have the clines, can i back em up and restore? Can I get another cline (possibly on trial) and use them? Can I disable (temporary) the existing lines? I'm a complete novice at this but I'm comfortable with tech....

Supplier not available for support.

recommendation on cline providers..

Any help suggestions PLEASE!

Chris.
 
You must log in or register to reply here.
Back
Top