I think you said you had an H2S
Download this file: http://images.mynonpublic.com/openatv/6.2/zgemmah2s/openatv-6.2-zgemmah2s-20180810_usb.zip
extract the zip to the USB stick so you have the zgemma folder on the USB, plug it in the box and turn it on.
When the front LCD screen says USB / UPDT, press the front power button - the LCD should change to FLSH
You will then be at step 1 of the setup instructions again.
Lets see if using this USB stick sorts your picon issue first, don't worry about the hard drive for now. We can deal with that if it sorts your issue.How should I handke the previous HDD and my recordings....reinitialize? Use the usb where the zgemma folder is? Now in the front usb...
Dear Woosh, it took me some time (I am slow) and just finished flashing as per your leaad above...and restarting iptv...back in business BUT..except for a handful of radio..where I could now see logos...situation did not change, that is no logos/picon.Lets see if using this USB stick sorts your picon issue first, don't worry about the hard drive for now. We can deal with that if it sorts your issue.
You can flash with the usb in the rear of the box if you want to and leave it in there for the full setup.
Are you using your box for satellite still too or just IPTV?Dear Woosh, it took me some time (I am slow) and just finished flashing as per your leaad above...and restarting iptv...back in business BUT..except for a handful of radio..where I could now see logos...situation did not change, that is no logos/picon.
I really appreciate your availability and great support...will have to catch up tomorrow if you are around.
..for now a bit frustrating...but will not give up;)
Thanks!
If a box is a clone, say of a Vu+ box, drivers are really something I can't do anything about. openATV is available for non clones. Doesn't help clone box users but I think we would end up trying to support the world.Does it matter if boxes are clones as i see posts stuck on old firmware because of drivers not working on newer images.
Might that be an issue with the infinity image?
Who's image is old mate? I haven't seen mention of a BH image or clone.Its hard to know with a vu solo2 on BH image as clones run on that + his image is old,many people were conned into thinking they bought an original,i would wonder if a newer openatv would work then infinity?
That is why you are not getting picons are large channel picons in skyQ. The channel names for IPTV do not match picon names and won't show a picon as a result.Good morning Woosh and all,
I'm using h2s for iptv only, even though the initial target was to have it also for sat, still have some mech/electr. issues that I need to fix on my positioner though.
This is the USB screenshots:
View attachment 34361
That is why you are not getting picons are large channel picons in skyQ. The channel names for IPTV do not match picon names and won't show a picon as a result.
e-channelizer could be used to assign picons to your channels but it is a long job. Nice result at the end though.
You are now free to shut down the box, remove the USB, plug your HDD back in and turn the box on.
Hi SayyiD. Re sidenote comment. Just wondered what you meant about it is NOT recommended to place picons in HDD. I have my picons on my HDD. What sort of problems does this cause? Cheers NealIn E-Channelizer, you can drag and drop picons to quickly assign them to channels.
On a side note, it is NOT recommended to place picons in HDD. Use the internal Flash if large enough or USB instead.
Hi SayyiD. Re sidenote comment. Just wondered what you meant about it is NOT recommended to place picons in HDD. I have my picons on my HDD. What sort of problems does this cause? Cheers Neal
In what way do you mean it fails to initialise your HDD? Does it tell you it is in use or just won't initialise it? If it is still saying it is installing Infinity, it is because you haven't gone all the way to the end of setup. Go through the setup steps (without initialising your HDD) and it will finish the setup.Tried updating, now my box fails to initialise the external HDD? Every time I reboot it tries installing "infinity". How can i stop this and revert back to version 7?