Downloaded the bootloader from OpenVIX website, but as I don't have a LCD on box, have no idea if it worked or not.Does anything happen on the display on the technomate?
Try powering it off completely and flash a stock image.
You may need to flash a new bootloader if you've corrupted it.
Try googling bootloader for your box type.
When you install a bootloader on Zgemma do you put it in a USB then install it?I don't know on a Technomate, I've only ever flashed bootloaders on Zgemma and Xtrend.
Nope, when flashing a bootloader, how long should I wait? When I do an image I usually get a onscreen notification of when to remove USB and turn the box off and on again.Yes, same as flashing an image.
Is there no lcd display on the technomate?
Just doing a low level format with the tool provided in the download section. Going to use that to perform the bootloader install.as like many e2 boxes extract to a good formatted fat 32 kingston 8gb usb stick,
any other usb remove first,insert when powered off,then box on and follow instructions for flashing box,when done box should reboot.
power off and remove usb format and extract image to usb and flash image.
also make sure box name is the same as your image:poop::poop::poop:
I have a Technomate TM-Nano-SE M2
Kingston 8gb DataTraveler G3, I've used this one to flash my TM Nano 2 Super and this box many times with newer versions of OpenVIX.what type of usb and size in use?
OpenATV the newest one.which firmware was you using on your box ?
vix or openatv
This is the model I havei updated mine to latest 20 i think it is lol,and your box is plus or not as images differ