1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cable Could it be my Feed is the issue

Discussion in 'Zgemma Star H.2H' started by wattcom, Dec 23, 2016.

  1. wattcom

    wattcom Registered

    14
    0
    Hi all


    Can any help me out so purchased a H2H and set My Network ID for My area to 0005 in Tuner and ABM also disabled Tuner A Issue i have when i do a ABM it sees 388 channels and 37 Radio but only channels that clear in HD are Local ITV and BBC1 no other channel clears with good working

    SO my question is could it be the Feed from VM as current receiver is an old Analogue Box but has a paid subscription for a well known Racing channels paid for that all works but even this does not clear on new Box but i did notice on the old VM it has a IP address but we dont have VM broadband so could it be streaming that one paid channel?


    What i have tried so far

    1.So a Friend tried my N-line in his box all worked well all channels cleared (but in a Different area and Location ID)
    2. Took box to friends House to see if it was tuner issue and All worked (but in a Different area and Location ID
    3. tried different Images and currently back on Bioheads one Best looking in my opinion for Just VM

    so i have ruled out the N-line and Tuner issue

    Am i wrong to assume that VM allows all channels to come down the Cable that feeds the current Box or is it that box is so old i need to have them upgrade with a new VM up-to-date box one and then replace it later with my nice new Zgemma H2H after awhile any VM engineers out there that can confirm my theory.
     
  2. Burlesy

    Burlesy TK Veteran

    1,085
    17
    HD channels shouldn't clear without the line which is strange.
    the only ones that should work without a line are FTA SD not like sat where some FTA HD channels clear.

    You said that the net ID is 0005 when luton one is 00005

    Could possibly be a dns error...
    but first I would try your N line in CCcam.

    Simply take your line change it to N: host port user pass 01 02 ..... 13 14
    put it in the CCcam.cfg located in the etc folder.
    then activate CCcam in softcam manager and disable mgcamd
     
  3. dezinacity

    dezinacity Registered

    259
    4
    To answer your question on the feed - it is either live or it isn't. There's no in between - if you receive one channel then you should receive all of them.


    Sent from my iPhone using Tapatalk
     
  4. wattcom

    wattcom Registered

    14
    0
    That what I was thinking just doubted my self after a while thanks for confirming

    Sent from my ONEPLUS A3003 using Tapatalk
     
  5. sneaky

    sneaky Registered

    73
    1
    I've got a similar issue, some channels are working and some aren't. It's a mixture of both SD and hd. Could it be something to do with frequency changes?
     
  6. cactikid

    cactikid VIP Member

    15,325
    799
    yes when boxes cannot update new channel movement they dont work.
     
  7. sneaky

    sneaky Registered

    73
    1
    How can i fixthe problem? Thanks