Hi Roadhogmaf,
I will recommend you downloading the zgemma H1 sucmnsee firmware this will have everything pre-installed for you.
http://www.techkings.org/zgemma-star-2s/82204-new-sucmnsee-latest-vix-backup-zgemma-2s-s-h1-h2.html
Once you have the zgemma H1 sucmnsee firmware. Format your USB to fat32 extract the files to the USB.
Box off.
Usb in rear.
Box on.
Menu
Setup
System
Storage devices
Initialisation
Select ur drive
Red to initialise
Exit all
Menu
Setup
Vix
Swapfile manager
Blue to create 256mb. Wait
Yellow to autostart
Green to start
Red to close.
Hold power button on remote for 3 secs and select Restart (not GUI)
If you find that the screen is to large/small/off to side :
Menu
Setup
System
User interface
Position setup
U can change about here. Including transparency of windows.
If not working change to 720p and 50hz and try again.
(If u are using a large enough usb/HDD u may want to go to
Menu
Setup
System
Timeshift settings
Autostart ts after 30secs or whatever.
As it is u must press pause to start timeshift)
Menu
Setup
Service searching
Autobouquets maker
Providers. Wait
Sky UK (sd):area. Change from northern ireland custom to your area custom by pressing right or left.
Green to save.
Start scan. Wait.
Exit all
Hold power Restart
Menu
setup
System
Epg
Cross EPG
Download now. Takes 5-10 mins. Will seem like its stuck on Loading Data. Wait.
Happens automatically at 6.20 am anyway.
Exit all
Hold power again and restart.
____________________________________________________________________________________________________________
CCcam
To install a line you will need to transfer the file via ftp (not with a usb like an open v8s).
Download a ftp program on your pc, I will recommed filezilla
https://filezilla-project.org/
Once installed open the program
Host tab = IP of box
Username tab = root
Password tab = EMPTY
PORT TAB = EMPTY
Quickconnect
Once connected, get your CCcam line and you will have to paste the line to the CCcam file which is located in the ETC folder.
*****IMPORTANT ONCE YOU HAVE PASTED THE LINE MAKE SURE YOU SAVE AND CLOSE****
Go back to your box
Press blue on the remote
Softcam
CCcam
Activate (green button on remote)
start on start up (blue button on remote)
Thanks
Mo