ronaldbiggs
Newbie
Hi just got a Gigablue UE with a GTSat S2dcss24. I have connected the single sat cable from the LNB to the box but do not receive any signal.
To check the signal strength etc I have swapped the cable to a legacy output and the Snr and AGC are 88% and 96% so all good for the cable and initial position of the LNB.
The settings with the tuner setup are below
The remaining tuners just follow suit with correct user bands and all connected to Tuner A.
Didn't know if was anything I have missed or if it's possibly a faulty Output from the LNB
I am running Willobuild
Thanks for any assistance
To check the signal strength etc I have swapped the cable to a legacy output and the Snr and AGC are 88% and 96% so all good for the cable and initial position of the LNB.
The settings with the tuner setup are below
The remaining tuners just follow suit with correct user bands and all connected to Tuner A.
Didn't know if was anything I have missed or if it's possibly a faulty Output from the LNB
I am running Willobuild
Thanks for any assistance