What's new
By:
Filters

Weird problem

contracts34

contracts34

Member
Been running a 2S box with a ccam line for 3/4 weeks no problem. Ordered a H2S which arrived yesterday so contacted my provider for a second line. Cabled from my LNB to new box and set up okay. When I add the second line, I now get freezes on both boxes. If I switch one box off the other still freezes unless I remove the Ethernet cable from the box in standby.

I have tried switching the lines from box 1 to box 2 but no difference. Been trying different things all day!

All cables/connectors are fine, been double checked and have even run new Ethernet cables to each box to rule them out.

Any ideas what the problem could be.
 
Both on separate IP addresses but have already tried a router reboot? Could it be a faulty LNB as this is the first time all four feeds have been used at the same time.
If I run just one box it seems okay
 
so both lines are clines and using 2.30 to open them,not using a faulty mg_cfg file then?

if both boxes work ok on bbc1 hd no lan needed points to internet issues as said and not lnb issues happen on all channels
 
Last edited:
You must log in or register to reply here.
Back
Top