pieman69pies
Newbie
If not, try something like this Look at this on eBay http://www.ebay.co.uk/itm/400952692291
Sent from my HTC One M9 using Tapatalk
Sent from my HTC One M9 using Tapatalk
I have had another look at the cable you have, and the stinger that pokes out of the end does look a little short (should stick out of the connector by about the thickness of a pound coin). It might not be making a proper connection inside the splitter and/or receiver. With these connectors, you might find you need to hold the plastic boot whilst tightening. Tighten as much as you can by hand, and then give it a tiny nip-up with an 11mm spanner. You never know.
Sent from my HTC One M9 using Tapatalk
had the exact same problem. struggled with it for months. tried different splitters and attenuators. as i though it was a snr problem with the 229%. since the sat is up in the air atm i decided to have another bash at. checked and tightened all connections. no joy. decided to start again with the splitters. started at the splitter nearest the device. a konig fc-25plt-st-kn. which i honestly believe i bought to replace the original splitter when trying it the first time. had an eco ES1-02N in a drawer. pit it on and voila. perfect picture . snr still 229% but channels are perfect. hope this helps because i know hiw frustrating this issue is.Hello TK
I recently got a h2h with a vermin line and am having problems with channels pixelating and sometimes even cutting out. upon checking my signal strength it reads SNR:229% - AGC: 7% - BER: 0. I tried a new splitter to see if that helped and it hasn't. Thats about as far as my tech skills go on the matter so was hoping someone here could help me out. Anything else i could try?
Cheers
Beats
Beats think you've found another issue :) Have a read here...
The best coaxial Cable for Sky, Freesat, Freeview