What's new
By:
Filters

Zgemma h9s turning on on its own

D

Darconio

Newbie
I have 2 zgemma h9s, everything was fine until I decided to re-flash them with the latest openatv 6.4 and wooshbuild. Sometimes the one in the living room turn on by itself at around 7AM and sometimes the one in the sleeping room (same time). Once I observed that one of the box got the red led-white led and then went down on its own, again at around 7am.
They are both in deep standby, I have disabled hdmi-cec, disabled wifi, checked the cron jobs and the only one displayed is the ntpupdate set every 30 minutes I believe h:00:30 : I disabled that one as well.
Don't know what else to do, anybody else experiencing a similar issue?
 
1633857993585.png1633858026784.png

Epg importer has an automatic start time at 6, but having disabled the ntpdate cron job, the box time was goosed anyway. Yet at 7 it turned on by itself, plus it has the flag to skip the import when in deep standby. Also it was never the case before reflashing the box, and as far as I know I never changed the default settings previously.
My mobile phone is set to autostart at 7AM, for as much as I would like to think it isn't interfering with the box (with both boxes even!), I will also disable this feature and see what happens
Any other suggestion?
 
cactikid said:
Do you use functions of phone to control box?
Click to expand...
No I don't, beside I would have the phone downstairs and the box upstairs. But I would take that out of the equation because the box I have downstairs is affected as well. Something changed and I can't figure it out what exactly:
I flashed the latest 6.4 Openatv
Installed wooshbuild
Imported main sat bouquets with e-channelizer (3 lnb)
Installed E2m3u2bouquet with the suls script and configured for IPTV
Configured EpgImporter for the required IPTV only

That's all :cry:
 
As i dont use iptv could you disable it for a day to see if it still comes on the next day and both boxes are not sharing the same server/script.
Interesting query on why/what is the cause.

Unsure if logs might need setting up but others would have to say if server info is contained within them if posting on forum ?
 
pabloescaban said:
Run opkg update via terminal to see if there's an update stuck
Click to expand...
That command pulled down few updates

Code: 
Downloading http://feeds2.mynonpublic.com/6.4/h9/3rdparty/Packages.gz.                                                                                                      
Updated source 'openatv-3rdparty'.                                                                                                                                          
Downloading http://feeds2.mynonpublic.com/6.4/h9/all/Packages.gz.                                                                                                            
Updated source 'openatv-all'.                                                                                                                                                
Downloading http://updates.mynonpublic.com/oea/4.4/cortexa15hf-neon-vfpv4/Packages.gz.                                                                                      
Updated source 'cortexa15hf-neon-vfpv4-3rdparty-secret-feed'.                                                                                                                
Downloading http://feeds2.mynonpublic.com/6.4/h9/cortexa15hf-neon-vfpv4/Packages.gz.                                                                                        
Updated source 'openatv-cortexa15hf-neon-vfpv4'.                                                                                                                            
Downloading http://feeds2.mynonpublic.com/6.4/h9/h9/Packages.gz.                                                                                                            
Updated source 'openatv-h9'.                                                                                                                                                
Downloading http://feeds2.mynonpublic.com/6.4/h9/h9_3rdparty/Packages.gz.                                                                                                    
Updated source 'openatv-h9_3rdparty'.                                                                                                                                        
Downloading https://raw.githubusercontent.com/oe-alliance/oe-alliance-settings-feed/master/feed/Packages.gz.                                                                
Updated source 'oe-alliance-settings-feed'.                                                                                                                                  
Downloading http://wbuildx.co.uk/wbx/feeds/Packages.gz.                                                                                                                      
Updated source 'wooshbuild-feeds'.                                                                                                                                          
Downloading http://feeds2.mynonpublic.com/6.4/h9/zgemmah9s/Packages.gz.                                                                                                      
Updated source 'openatv-zgemmah9s'.

Am I right assuming that these are unrelated to the Software Update function in the software management menu?

EDIT : Actually every time I run the opkg update command it downloads the same list as above..
 
Last edited:
It updates the feeds/sources.
If your box was trying to download an update from a dead feed it will continually try the same thing over and over, now you have updated sources it should find what it's looking for.

Reboot the box and wait until 7am to see if it worked.
 
Unfortunately this happened again this morning.
The one upstairs went into a standby state (red led) for about 90-120 seconds
I came downstairs and the one in the living room was turned on
There must be a task/script triggering this at 7 but I can't , for the love of god, find what/where it is
 
Darconio said:
Unfortunately this happened again this morning.
The one upstairs went into a standby state (red led) for about 90-120 seconds
I came downstairs and the one in the living room was turned on
There must be a task/script triggering this at 7 but I can't , for the love of god, find what/where it is
Click to expand...
Enable debug logs to see what is happening when the box wakes from standby.
 
simonsuggs79 said:
is the sleep timer set ? think its in power management
Click to expand...
I'm afraid I don't have any power timer created

1634105846354.png


Willo3092 said:
Enable debug logs to see what is happening when the box wakes from standby.
Click to expand...

I've enabled debug log, but surprisingly the last log recorded was from last night! and I restarted this morning after it was automatically switched on, and the log was created...only for my reboot
I'm starting to think that I have a poltergeist in the box :fearscream:
1634106166291.png
 
I'm pretty sure that a GUI restart is required when you enable the logs. I think it does it automatically on ViX.
 
You must log in or register to reply here.
Back
Top