Viark VIARK TYPE BOXES

Help , So i have updated my viark sat 4k box to latest version1,23 I foolishly never saved my channel list sly uk only Can someone help me get latest channel list please . Also I had to go into other settings to set the usuals I set it up by country Britain and took a pic , so have i set it up correctly ? . . Thanks Guys ..
longitude should probably be west, unless you're in the Cambridge, Norwich area.

uk-lat-long.jpg
 
Help , So i have updated my viark sat 4k box to latest version1,23 I foolishly never saved my channel list sly uk only Can someone help me get latest channel list please . Also I had to go into other settings to set the usuals I set it up by country Britain and took a pic , so have i set it up correctly ? . . Thanks Guys ..
Use this for your coordinates

www.gps-coordinates.net/my-location

If you longitude is a - figure then you would choose west
 
I had it in English. There were 4 audio tracks and English was track 3.

It was the same Goal Rush as shown on other international channels like Peacock and Fubo Sports, just with German as the main audio track.
Was streaming to VLC from the E2 box and there was only audio track unfortunately.

Unless you were using one of the Viark IPTV tracks?

Will try again next weekend and see.
 
Not had a chance to check, will check later and report back.

Thanks in advance
Sorry for the late reply. I have been working away from home all week.

Doble-checked my config, USALS setting correct. Lat and Long confirmed using Dispointer.eu
In Antenna config, All SATS set to USALS for Motor and Universal for LNB type.

I did notice the settings for LNB power for some were inconsistent. Some showing 13V/18V, some 13V and some 18V. What should it be set to?

IS there a way to fine tune the dish myself?
 
Sorry for the late reply. I have been working away from home all week.

Doble-checked my config, USALS setting correct. Lat and Long confirmed using Dispointer.eu
In Antenna config, All SATS set to USALS for Motor and Universal for LNB type.

I did notice the settings for LNB power for some were inconsistent. Some showing 13V/18V, some 13V and some 18V. What should it be set to?

IS there a way to fine tune the dish myself?
Set all to 13v/18v and 22KHz to Auto
Press F2 to bring up an on screen fine tuning menu where you can move the dish east and west etc. Or in Antenna Config Pressing OK on the USALS will bring up the same menu once happy Store Position then change USALS to DiSEqC1.2
 
Set all to 13v/18v and 22KHz to Auto
Press F2 to bring up an on screen fine tuning menu where you can move the dish east and west etc. Or in Antenna Config Pressing OK on the USALS will bring up the same menu once happy Store Position then change USALS to DiSEqC1.2
Hi, Went to SSPL which opened on 69% quality, Wnet into the antenna settings and moved west using fine tuning until it went up to 75%, not performing a blind scan, will let you know how I get on (I hope I did it right)
 
Hi, Went to SSPL which opened on 69% quality, Wnet into the antenna settings and moved west using fine tuning until it went up to 75%, not performing a blind scan, will let you know how I get on (I hope I did it right)
Do all your sat positions get stronger if you nudge the dish West ?

If so you would be better adjusting the longitude figure of your usuals settings.

Shave say 0.2 off or add 0.2 and keep going till you fell you have the best signal like 75% on SSPL.

Doing it this way will save fine-tuning every sat. If its just the one sat that is out and that would make no sense then do as above tweak with Diseqc 1.2
 
Was streaming to VLC from the E2 box and there was only audio track unfortunately.

Unless you were using one of the Viark IPTV tracks?

Will try again next weekend and see.
IMG_0265.jpeg


English working again this weekend for goal rush on Sky Sports DE. You have to select Audio 2 on a Viark. The same options are also available on my E2 box so your issues must have been with the VLC stream.
 
Hi, Went to SSPL which opened on 69% quality, Wnet into the antenna settings and moved west using fine tuning until it went up to 75%, not performing a blind scan, will let you know how I get on (I hope I did it right)
How Accessible is the dish as it sounds like it needs realigned?
If possible loosen it off, move it west and nip it back up then go back to fine tuning, get the best Q then count the amount of movement steps east and west till you start to see the Q drop off. Loosen dish move in required direction nip back up and repeat until the Q drops off equally east and west this is with USALS.
 
Back
Top