Is there a way of checking the incoming signal strength and quality on tuner 2 (cable) with a Blade 7000 Combo?
Thanks for the information.
When using qam256 the levels are around 78% and quality 82%, when using the qam64 setting the level is 82% and quality 25%.
The signal quality is not constant and keeps pulsating on both qam settings between 0% to 82%, is this normal for cable?
Thanks,
Do yet get the pulsating signal quality when on tuner 2 (see video)? with satellite it's a steady reading.
[video=youtube;bAu9hzQcJT4]http://www.youtube.com/watch?v=bAu9hzQcJT4[/video]
256 QAM
[video=youtube;3mqw2DcTO_k]http://www.youtube.com/watch?v=3mqw2DcTO_k[/video]
64 QAM
and any idea why such a poor quality with the 64 QAM setting?
Yes I do get the pulsating, as for your poor quality on 64 I think your on the wrong frequency
Put in on manual scan.......
643.0
06.887
64
then scan
and
635.0
06.887
64
then scan
and
651.00
06.887
64
then scan
and
659.0
06.887
64 then scan
---------- Post Merged at 02:58 PM ----------
They are the 4 Qam64 running on mine, the rest of the frequencies are on Qam256's
Thanks,
Do yet get the pulsating signal quality when on tuner 2 (see video)? with satellite it's a steady reading.
[video=youtube;bAu9hzQcJT4]http://www.youtube.com/watch?v=bAu9hzQcJT4[/video]
256 QAM
[video=youtube;3mqw2DcTO_k]http://www.youtube.com/watch?v=3mqw2DcTO_k[/video]
64 QAM
and any idea why such a poor quality with the 64 QAM setting?